Linkliste
Pneumatic Drive Swivel Drive For Ball Valves - Double Acting
Pneumatic Drive Swivel Drive For Ball Valves - Spring-Closing
Pneumatic Driven Swivel Drive For Ball Valves - Spring-Opening
Pneumatic Swivel Drive For Stop Valves
Complete Plastic Silencer
Silencer - With Stainless Steel Wire-Cloth
Sinter Bronze Silencers
Plastic Silencer With Granulate Filling
Sinter Bronze Exhaust Silencer and Brass Threadd
Silencer Complete Brass - Concealed
Sinter Bronze Silencer - With Hexagon
Noise Damper - Standard - Over 30dB(A) Noise Reduction
High Performance Noise Damper - Series ANA1 - Noise Reduction 42dB(A)
Stainless Steel Silencer With Hexagon Head
Noise reducer 1/4" - AN 200-02
Silencer Free-Flow - Especially For Ejectors
Muffler 1/4" plastic
Exhaust Air Silencer With Fine Filter - Plastic
High Perfomance Damper - Series ANB1 - Noise Reduction 40dB(A)
High Performance Silencer - For Big Air Amounts
High Performance Silencer 254 to 1.130 m³/min
Exhaust Choke Silencer - Sinter Bronze
Choke Silencers - Sinter Bronze
Precision Exhaust Silencer - Sinter Bronze
Silencers
Relief Valve For Tanks
Condensate Separators - Standard
Condensate Separator - Synchronous
Condensate Separator ultra.drain UAD - Level Conrolled - Compressor Capacity From 10 To 130 m³/h
Ultratroc - Electric and Level Controlled
Bekomat Condensate Separator - Electronic - Level Controlles - For Oleiferous Condensate
Condesate conditioner pump - automated - ultramat
Condensate separator ultrasepThe secluded condensate must be processed, with the ultrasep super plus.
Oil/Water Separator ultra.sep UAS xxx - For Compressor Capacities 210 To 8400 m³/h
Separator LSA 0100 - automatic
Condensate Conditioning
Tensioning Straps - For Cylinder Switches
Tension Band Fr Electric Cylinder Switches Type ZSES - VA 1.4301
Cylinder Switch For Cylinder With Continuous T-Nut - For XL-Cylinder
Cylinder Switch - For Round Cylinders And Profiled Tube Cylinders TYPE TM/TME
Cylinder Switch For Cylinders With Not Revolving T-Nut
Anchoring Clips - For Cylinder Switches (T-Nut)
Anchoring Clips For Cylinder Switches - Type ZS 24.../ZS 220...
Cable Sets Wth Coupling M8
Adapter Plates For Valve Direct Valve Fastening On Cylinders - For XL-Cylinder
Signal Transducers
Electric Cylinder Switches - For Stainless Steel Cylinders
Locking Devices - For Small Cylinders ISO 6432
Cylinder Locking Unit ISO 15552
Signal Transducers For Compressed Air Cylinders
Flange Pivot Fastening - Galavnized Steel And VA 1.4571 - For Cylinder ISO 15552
Bolt For Spherical Flap - Galvanized Steel - For Cylinder ISO 15552
Bolt For Swivel Fastening - Galvanized Steel And VA 1.4401 - For Cylinder ISO 15552 And Compact Cylinder
Bolt For Swivel Mountings - VA 1.4401 - For Cylinder ISO 6431
Pendulum For Piston Rod Less Cylinders - Broad
Pendulum For Piston Rod Less Cylinders - Narrow
Clevis Foot Mounting - For Round Cylinders
Swivel Fastening Clives - Aluminium With Bushing - For Cylinder ISO 15552 And Compact Cylinder ISO 21287
Swivel Fastening Clives - VA 1.4401 - For Cylinder ISO 15552 And Compact Cylinder ISO 21287
Swivel Fastening Clives For Spherical Flap - VA 1.4401 And Aluminium - For Cylinder ISO 15552 And Compact Cylinder ISO 21287
Swivel Fastener 90° Flap - Aluminium And VA 1.4401 - For Cylinder ISO 15552, Compact Cylinder And Compact Cylinder ISO 21287
Swivel Spherical Flap Fastening - Bronzed Steel, Aluminium And VA 1.4401 - For Cylinder ISO 15552 And Compact Cylinder ISO 21287
Swivel 90° Spherical Flap Fastening - Bronzed Steel - For Cylinder ISO 15552 And Compact Cylinder ISO 21287
Swivel Fastening Flap- Aluminium Or VA 1.4401 - For Cylinder ISO 15552 And Compact Cylinder ISO 21287
Swivel Fastening 90° Flap - Aluminium - For Cylinder ISO 15552
Swivel Foot Mountings - VA 1.4404 - For Cylinder ISO 6431
Medium Swivel Fastening - Galvanized Steel - For Cylinder ISO 15552
Medium Pivot Fastener - Galvanized Steel - For Cylinder ISO 15552 (XL)
Swivel Mounting - VA 1.4401 - For Clean-Profile-Cylinder
Swivel Mountings For Compressed Air Cylinders
Clevis Mounting With Bolt - Galvanized Steel And VA 1.4301 - For Small Cylinders ISO 6432, Compact Cylinders and Compact Cylinders ISO 21287
Clevis Mounting - Galvanized Steel and VA 1.4401 - For Cylinder ISO 6431 And ISO 15552
Clevis Foot Mountings 90° - VA 1.4401 - For Cylinder ISO 6431
Bearing Blocks For Compressed Air Cylinders
Threaded Bolts - For Round Cylinders
Foot Mountings - Galvanized Steel And VA 1.4301 - For Smal Cylinders ISO 6432
Foot Mountings - Galvanized Steel And VA 1.4401 - For Cylinder ISO 15552
Foot Fasteners - For Round Cylinders - Galvanized Steel
Foot Fasteners For Rodless Cylinders - Galvanized Steel
Central Fastener For Rodless Cylinder - Aluminium
Adpater To Build A Manyfold Positioning Cylinders - Aluminium
Foot Mountings For Compressed Air Cylinders
Flange Mounting - Galvanized Steel And VA 1.4301 - For Cylinder ISO 6532 And Small Cylinder ISO 6432
Flange Fastening In Front Or In The Back - Galvanized Steel, VA 1.4401 - For Cylinder ISO 15552
Threaded Bolts - For Round Cylinders
Slotted Nut For Round Cylinders - Galvanized Steel
Flange Mountings For Compressed Air Cylinders
Cylinder Head - Fastening Cap Nuts And Piston Rod Cap Nuts - Galvanized Steel And VA 1.4301
Piston Rod Nuts
Flexible Couplings - Galvanized Steel And VA 1.4305/1.4301- For Small Cylinders ISO 6432, Compact Cylinders, Compact Cylinder ISO 21287 And Cylinders ISO 15552
Flexo Coupling With Mounting Plate - Galvanized Steel And VA 1.4301 - For Cylinder ISO 6431, Cylinder ISO 15552, Compact Cylinder And Compact Cylinder ISO 21287
Flexible Couplings For Piston Rods
Swivel Heads - For Small Cylinders ISO 6432, Cylinders ISO 15552, Zylinder ISO 6431, Compact Cylinder, Round Cylinder And Compact Cylinder ISO 21287
Swivel Heads (Male) - Galvanized Steel And VA 1.4404 - For Compact Cylinder And Short Stroke Cylinders NE/ND
Swivel Heads 90° - For Small Cylinders ISO 6432
Clevis For Piston Rods
Clevis With Bolt - VA 1.4305 or Galvanzizde Steel - For Small Cylinders ISO 6432, Cylinder ISO 15552, Cylinder ISO 6431, Compact Cylinder And Compact Cylinder ISO 21287
Clevis - Galvanized Steel And VA 1.4035 - For Round Cylinders
Clevis (Male Thread) With Bolt - Galavanized Steel - For Compact Cylinders And Short Stroke Cylinders NE/ND
Clevis For Piston Rods
Cylinder Mounting Components
Guide Cylinder - Self Lubricating Ball Bearing - Piston-Ø 16 To 100 mm - Stroke 10 To 200
Guide Cylinder - Ball Lining Guide - Piston-Ø 16 To 100 mm - Stroke 10 To 200 mm
Pilot Cylinders
Shock Absorber - Adjustable - Type MA
Shock Absorber Adjustable - Type MA - Magnum
Shock Absorber Self-regulating - Type MC - Small Construction Type
Anti-Shock Dampers Self-Regulating - Type MC - Big Construction Type
Shock Absorber Self-Regulating - Type MC - Magnum
Shock Absorber Self-Regulating - With Progressive Shock Absorbance - Type SC
Impact Bushing For ACE Shock Absorbers
Flange For ACE Shock Dampers
Side Load Adapter For ACE Shock Absorber
Cylinders Without Piston Rod
Octagon Holder For Rodless Cylinders
Pilot Cylinder Blocker
Arrester For Piston Rod Less Pilot Cylinder - Adjustable Arrester
Short Stroke Cylinders Ø 12 To 100 mm
Oil Hydraulic Cylinder - Acc. To ISO 15552 - Speed Regulation - For Prestroke
Oil Hydraulic Cylinders - Acc. To ISO 15552 - Speed Regulation - For Back Stroke
Compact Cylinder - Continuous Piston Rod
SMC Air cylinder - class CQ2BS - single-acting - elastic force depressurized extended
SMC Compact-cylinder - class CQ2BS - single-acting - elastic force depressurized retracted
SMC Pneumatic Air Cylinder - double action - class CQ2BDC - elastic extreme position
Compact - Short Stroke Cylinder Eco Line
SMC Compact cylinder - double action - class CQ2WBD - persistent piston rod
Compact Cylinder ISO 21287 - Double Acting - With Solenoid Piston - Piston-Ø 20 mm To 100 mm - Hub 5 To 400
Compact Cylinder - Single Acting - With Solenoid Piston - Piston-Ø 12 To 100 mm - Hub 5 To 50
Short Stroke Cylinder - Single Acting - Piston-Ø 16 To 100 - Hub 5 To 50
Short Stroke Cylinder Double Acting, Piston Ø 12-100 mm
Short Stroke Cylinder, Double Acting. Piston Ø 12-100 mm
Short Stroke Cylinder - Double Acting - Piston-Ø 16 To 100 mm - Stroke 5 To 100
Short Stroke Cylinder - Double Acting - Anti-Twist Piston Rod - Piston-Ø 20 To 100 mm - Hub 5 To 80
Gasket Kit For Compact Cylidner - Construction Type CQ2BS And CQ2BT
Gasket Kits For Compact Cylinders - Construction Type CQ2B
Sealing Kit For Compact Cylinders - Construction Type CQ2WBD - Without Solenoid Ring
Compact Cylinder - Standard Ø12mm To Ø200mm
ISO 15552 Compressed Air Cylinder Ø 32 mm - Double Acting Normed Compressde Air Cylinder - Type Eco-Line - Adjustable Shock Absorbing Action - With Magnet Ring
SMC pressure air cylinder ISO 6431 - norm cylinder double action - class CP95SDB - adjustable extreme position
SMC air cylinder ISO 6431 - norm cylinder double action - class C95SDB - adjustable extreme position
SMC pneumatic cylinder ISO 6431 - norm cylinder double action with persistent piston rod - class CP95SDB - adjustable extreme position
Compressed Air Cylinder ISO 15552 - Double Acting - Adjustable End Of Stroke Damping - With Magnet - Type TM
Compressed Air Cylinder ISO 15552 - Double Acting - Adjustable End Of Stroke Damping - With Magnet - Type XL
Standard - Air Cylinder Ø32mm To Ø100mm
Pull up hose clamp - POM
Rope Clamp - Stainless Steel - DIN 741
Quick Release Band Clamps - stainless steel V2A - width 9 mm
Special Clamps
It will be soon available
SPANNFIX - safety clamps - hot stamped aluminium
SPANNLOC - Double Bolt Clamps - Aluminium - DIN 2817
Safety clamp Spannfix - Aluminium - 1"
Bolt Clamps
It will be soon available
It will be soon available
It will be soon available
Pipe Clamp - Light Construction Type - With Bearing Rail Nuts - Plastic
Pipe Clamp - Light Construction Type - With Bearing Rail Nut For The Installation On a C-Bearing Rail - Stainless Steel
Pipe Clamps With Rail Nut
Pipe Clamp - Light Construction Type - With Weld-On Base Plate, Cover Plate And Bored Fastening Plate - Plastic
Pipe Clamps - Light Construction Type - With Extended Weld-On Base Plate And Bored Fastening Plate - Stainless Steel
Pipe Clamps With Screwing Plate
Pipe Clamp - Light Construction Type - With Weld-On Base Plate - Plastic
Pipe Clamps - Light Construction Type - With Cover Plate - Plastic
Pipe Clamp - Light Construction Type - With Weld-On Base Plate - Stainless Steel
Pipe Clamp - Light Construction Type - With Weld-On Base Plate And Cover Plate
Pipe Clamps With Weld-On Base Plate
Pipe Clamps
Hose Clamps for PE-, PA- and PU-hose, tubes or pipes - plastic
Pipe Clamp - Stainless Steel Without Inlet
Quick Hose Clamp- W2 - 12mm Width - Ø 60 To 660 mm
Quick Hose Clamp - W2 - 9mm Width - Ø 60 To 660 mm
Quick Hose Clamps - W4 - 9mm Width - Ø 60 To 660 mm
Rubber Lined Hose Clamps - galvanized steel - width 12 mm
Rubber Lined Hose Clips - galvanized steel - width 15 mm
Rubber Lined Hose Clamp - galvanized steel - width 20 mm
Rubber Lined Hose Clip - galvanized steel - width 25 mm
Rubber Lined Hose Clamp - stainless steel W5 (1.4571) - width 12 mm
Rubber Lined Hose Clamps - stainless steel W5 (1.4571) - width 15 mm
Rubber Lined Hose Clips - stainless steel W5 (1.4571) - width 20 mm
Rubber Lined Hose Clip - stainless steel W5 (1.4571) - width 25 mm
Consoles For Hose Clamps
console for hose clamp - steel zink coated
Rubber Lined Hose Clamps
Hose Band Mounting Tool
Giant Tool For Bands
Hose Clamp Set "Endless" Rustfree
Hose Clamps - Self-build-Set - steel galvanized - 9mm width
Hose Clamps - Self-build-Set - Steel galvanized - 12mm width
Worm Drive Band Assortment
Hose Clip Fastener for 12mm band width - steel galvanized - collapsible system-unit cover
head for endless band with 8mm wide - steel galvanized
Fasteners for Band Clamps - 14mm width - steel galvanized
Hose Clamp Fastener - 9 mm band width - steel galvanized
Fasteners for Band Clamps with 8mm width - stainless steel V2A
Fastener for orm Drive Bands with 14mm width - stainless steel V2A
Band Clamp Fastener For Worm Drive Clamps
Worm Drive Band - steel galvanized - 9mm width - 25m set
Worm Drive Clamps - endless - steel galvanized - width 8mm - 25m set
Worm Drive Banding - stainless steel V2A - 8mm wide - 25m set
Band Clamp - steel galvanized - 14mm width - 25m set
Hose Clamp - Self-build- steel galvanized - 12mm width - 25m set
Hose Clamp Band - stainless steel V2A - width 24 mm - 25m set
BAND-IT Dispensers
Band-It Tool - Heavy Duty - 1/4" up to 3/4"
Band-It Tensioning Tool
Band-It Tag and Embossed imprinter ID204
Band-It Assembling Tool - Compressed Air - To Mount Junior-Cuffs - Manually Cutting
Band-It Assembling Tool - Compressed Air - To Mount Junior-Cuffs - Automated Cutting
BAND-IT Tool
Band-It screw loops - type 201 - stainless steel
Band-It Buckles - Stainless steel 316
Band-It Buckles - Stainless steel 316
Band-It Buckles - Stainless steel 316
BAND-IT Buckles
Band-It Hose Clamps- Type Junior 201
Band-It metal band - Stainless steel - type Valustrap
Band-It metal band - Stainless steel type 216
Band-It metal band - Stainless steel type 316
BAND-IT Band & Buckle
Worm Drive Band
Hose clamps, two parts DIN 20039 A
Double Hose clamps - with safety claws DIN 20039 A
Hose Clamps 2 pieces - Stainless Steel -
Hose clamps, three parts with safety claws DIN 20039 A
Muffler Clamps - Bipartite For Steam Hoses - Brass - DIN 2826
Clamp Collar - Bipartite For Steam Hoses - Stainless Steel 1.4401 - DIN 2826
Hose Clamps
T-Bolt Clamps - galvanized steel - width 18 mm
Double-Bolt Clamp - width 20 mm
Double-Bolt Clamps - galvanized steel - width 25 mm
T-Bolt Clamps - stainless steel V4A - width 18 mm
console for hose clamp - steel zink coated
Steel T-Bolt Clamps - stainless steel V4A - width 20 mm
T-Bolt Clamp - stainless steel V4A - width 25 mm
Bolt Clamps
Wire Hose Clamp - stainless steel
Double Wire Hose Clamps - galvanized steel
Wire hose clamp - stainless steel V2A
Wire Hose Clamps
Nut-and-bolt Hose Clamp - width 9 mm - galvanized steel
Nut-and-bolt Hose Clamps - width 12 mm - galvanized steel
Nut-and-bolt Clamp - width 15 mm - galvanized steel
Supaclamps - width 20 mm - galvanized steel
Nut-and-bolt Hose Clamp - width 25 mm - galvanized steel
Nut- And Bolt Clamps
Worm Drive Hose Clamp - chrome steel - width 5 mm - perforated
Worm Drive Hose Clamp - stainless steel V2A - width 5 mm - perforated band
Worm Drive Hose Clamps - stainless steel V4A - width 9 mm
Worm Drive Clamps - stainless steel V2A - width 9 mm
Worm Drive Hose Clamp - width 9 mm - galvanized steel
Worm Drive ClampS - chrome steel - width 9 mm
Worm Drive Clamps - aluminium zinc - width 9 mm - hinged hose clamp fastener -
Worm Drive Hose Clamp - Aluminium zinc - width 9 mm - hinged hose clamp fastener - embossed band
Worm Drive Hose Clamp - width 12 mm - galvanized steel
Worm Drive Clamp - width 12 mm - chrome steel
Worm Drive Hose Clamp - stainless steel V2A - width 12 mm
Worm Drive Hose Clamps - width 12 mm - stainless steel V4A
Worm Drive Clamps - stainless steel V2A - width 9 mm
console for hose clamp - steel zink coated
Worm Drive Clamp with integrated grounding - stainless steel V2A - width 9 mm
Hose Clamp with fixing eyelet - worm drive - stainless steel V2A - width 9 mm
Hose Calmp Assortment, Rustfree, 26-Pieces
Worm Drive Clamp - stainless steel V2A - width 12 mm
Hose Clips with fixing eyelet - worm drive - stainless steel V2A - width 12 mm
Worm Drive Clamp with integrated grounding - stainless steel V2A - width 12 mm
ABA Standard - SMS 2298 - 12 mm hose clamps
Wormdrive Hose Clamp Assortment - galvanized steel - width 9 mm
Worm Drive Hose Clamps - assorted - chrome steel - width 9 mm
Worm Drive Hose Clamps Assortment - galvanized steel - width 12 mm
Worm Drive Clamp Assortment - stainless steel V2A - width 9 mm
Worm Drive Hose Clamps - assorted - chrome steel - width 12 mm
Hose Clamps - assorted - stainless steel V2A - width 12 mm
Hose Clamp Assortment - stainless steel V4A - width 12 mm
Fasteners For Hose Clamp Endless Band "EB 9" - W1
Hose Clamps For Worm Drive Band "EB 9 " - W2B - Length 3m - Fasteners
Hose Clamps Endless Band "EB 9" - W2 - Length 30 m
Hose Clamp Worm Drive Band "EB 9" - W4 - Length 3m - Fasteners
Hose Clamp Fasteners "EB 9" - W4 - Length 30 m
Hose Clamp Worm Drive Band "EB 13" - W2 - Length 30 m
Hose Clamps "EB 13" - W2 - Length 3 m - With 6 Heads
Worm Drive Band "EB 13" - W4 - Length 30 m
Worm Drive Band "EB 13" - W4 - Length 3 m - 6 Heads
Fasteners For Hose Clamp Endless Band "EB 13" - W2
Fasteners For Worm Drive Band "EB 13" - W4
Hose Clips For Hose Clamps "EB 9" - W4
Worm Drive Clamps
Single Ear Clamps, galvanized steel
Double Ear Clamps, galvanized steel
Single Ear Clamp with insert, galvanized steel
2-Ear Clamp, stainless steel
1-Ear Clamps, stainless steel
Ear Clamps with insert, stainless steel
Double Eared O-Clips Assortment - galvanized steel
Single Ear Clamps Assortment - galvanized steel
Single Eared O-Clip Assortment with inlet - galvanized steel
Single Ear Clamp Assortment - stainless steel
Double Ear Clamps Assortment - stainless steel
Eared Hose Clips Assortment with insert - stainless steel
Ear Clamps
Hose Clamps
Heated hose NW 25 PTFE inliner
Heated Hoses
VacFlex Sleeve
SuperFlex Sleeve
Heat shrink sleeves for helix hoses and sockets
Bush for threaded connector
Hose connector - hose reducer
Threaded connector end for the popular coupling- and connectionsystems
Screw connector for helix hoses
Coupling TRI-Clamp - for lugs in DIN 32676
Flange pipe - coupler for pipe sytems
Loose flange for counter flanges
Accessories - Spiral Hoses
Cable protection hose - PVC - light - 60°C
Cable protection hose - PVC - 70°C
Cable protection hose - PVC - heavy - 60°C
Cable protection cover - network hose - 105°C
Protection hose with PVC coating, + 70°C
Cable protection hose - galvanized steel - 400°C
Cable protection hose - PUR - 90°C
Cable Protection Hoses
Suction hose - galvanized steel, special fibre
Suction hose - steel, glas fibre seal
Suction hose
Special exhaust gas hose
Exhaust Extraction Hose Type TB150
Exhaust Extraction Hose Type TS150
Exhaust Extraction Hose Type TL180
Exhaust Extraction Hose Type TB250
Exhaust Extraction Hose Type TS250
Abgasabsaugschlauch Typ TL250
Exhaust Hose Type TB300
Exhaust Extraction Hose Type TS300
Exhaust Extraction Hose Type TL300
Spiral Suction Hoses - Exhausting Hoses
Swimmingpool hose - light
Suction and transport hose
Suction and blast hose
PU - suction hose
Suction and blast hose
Rubber Spiral Hoses - Oil Resistant - Black
Suction and blast hose
Fueling Vehicle Hose Acc. To EN 12115 - Heavy Duty
Spiral Suction Hoses - For Chemical Industry
Suction and transport hose
Suction and transport hose
Suction and transport hose
Suction and transport hose
Suction and transport hose
Suction and transport hose
Suction and transport hose
Universal and abrasion - proof suction and transport hose
Suction and blast hose
Suction and blast hose
Suction and blast hose
Universal suction and transport hose
Universal suction and transport hose
PVC - suction and pressure hose - food safe
Suction and transport hose
PU - suction hose
Suction and blast hose
Spiral Suction Hoses - For Edibles
Abrasion-proof and electrically conductive suction and transport hose
Abrasion-proof and electrically conductive suction and transport hose
Abrasion-proof and electrically conductive suction and transport hose
Suction and blast hose
Electrically conductive suction and transport hose
Exhaust and blast hose - antistatic - super-light
Antistatic suction hose
PVC - suction and pressure hose - antistatic
Spiral Suction Hoses - Antistatic
Special suction and blast hose
Special suction and blast hose
Special suction and transport hose
PU - suction and transport hose
Exhaust and blast hose - super-light
Exhaust and blast hose - antistatic - super-light
Spiral Suction Hoses - Flame Retardant
Special suction and blast hose
Special suction and blast hose
Special suction and transport hose
PU - suction and transport hose
Special Hoses
High temperature hose - suction and blast hose (to +150°C)
High temperature hose - suction and blast hose (to +260°C)
High temperature hose - suction and blast hose (to +150°C)
High temperature hose - suction and blast hose (to +260°C)
Suction and blast hose
Suction and transport hose
Suction and blast hose
TPE Spiral Hoses
Cable protection hose - galvanized steel - 400°C
Suction hose - galvanized steel, special fibre
Suction hose - steel, glas fibre seal
Suction hose
Spiral Suction Hose - Metal
Universal and abrasion - proof suction and transport hose
Suction and blast hose
Special suction and blast hose
Suction and blast hose
Universal and abrasion - proof suction and transport hose
Suction and blast hose
Abrasion-proof and electrically conductive suction and transport hose
Special suction and blast hose
Universal and abrasion - proof suction and transport hose
Universal and abrasion - proof suction and transport hose
Suction and transport hose
Special suction and transport hose
Suction and transport hose
Suction and transport hose
Abrasion-proof and electrically conductive suction and transport hose
Suction and transport hose
Abrasion-proof and electrically conductive suction and transport hose
Suction and transport hose
Universal and abrasion - proof suction and transport hose
Suction and transport hose
Suction and transport hose
Universal and abrasion - proof suction and transport hose
Universal and abrasion - proof suction and transport hose
PUR - Pressure Hose - NORFLEX - Transparent - Food Safe
Polyurethane hose with steel wire spiral
PU - suction hose
PU - suction and transport hose
PU Spiral Suction Hoses
PVC - suction and pressure hose - green
PVC - spiral hose - green
PVC - suction and transport hose - Medical Dental
PVC - suction and pressure hose - cold-resistant
PVC - suction and pressure hose
PVC - suction and pressure hose - olive green
PVC - Granulates transportation hose - antistatic
PVC - suction and pressure hose - antistatic
PVC - suction hose - black
PVC - suction and pressure hose - food safe
Suction hose
Universal suction and blast hose
Suction and blast hose
Suction and blast hose
Exhaust and blast hose - super-light
Universal suction and transport hose
Universal suction and transport hose
Universal suction and transport hose
Universal suction and transport hose
Universal suction and transport hose
Universal suction and transport hose
Air suction hose - light
Suction hose - coolingflexibly - light
PVC - suction and pressure hose - food safe
Suction pipe
Exhaust and blast hose - antistatic - super-light
Coil hose PVC - Superelastic - black
PVC - ventilation hose
PVC - Oilhose - blue
PVC Spiral Hoses
Spiral Hoses
Fuel Hose Type E - Material CR-NBR - 10 bar - DIN 73379
Fuel Hose Type B - Material NBR - 10 bar - DIN 73379
Fuel hose / ÖKO-Diesel - 10 bar
Fuel hose / oil hose
Suction and pressure hose - black with red identity stripes
SBR suction and pressure hose / rollware
NBR-hoses (nitrile,perbunan) / rollware
NBR-Hoses
FKM-hoses (fluorine-rubber,viton) / rollware
Viton-Hoses
FEP-Material-hose, nature
FEP-Hoses
PTFE corrugated hose with stainless steel fabrics, 40
PTFE corrugated hose with stainless steel fabrics, 50
PTFE convolution hose
PTFE convolution hose with bend protection
PTFE-Wave Hoses
PTFE-hoses (teflon) / rollware
PTFE-Hoses
silicon hoses 60°Shore - inner diametre 0,5 to 2,5mm - transparent/without reinforcement
silicon hoses 60°Shore - inner diametre 3,0 to 5,5mm - transparent/without reinforcement
silicon hoses 60°Shore - inner diametre 6,0 to 8,9mm - transparent/without reinforcement
silicon hoses 60°Shore - inner diametre 9,0 to 12,9mm - transparent/without reinforcement
silicone hose 60°Shore - inner diametre 13,0 to 19,9mm - transparent/without reinforcement
silicone hose 60°Shore - inner diametre 20,0 to 29,9mm - transparent/without reinforcement
silicon hose 60°Shore - inner diameter 30,0 to 55,9mm - transparent/without reinforcement
Silicone hose - food genuine
Silicone hoses 60°Shore - 9,0 to 12,9mm - black/without reinforcement
Silicone hoses 60°Shore - 13,0 to 15,0mm - black/without reinforcement
Silicone hose - high temperature hose with fabric inlay
Heliprotection - Shiltek casing
Silicone Hose - With Fabric - 12mm I x 20mm A
Silicone Peroxide Hose - Inside Diameter 6,4 mm - Autoclavable
Silicone Hoses
Silicone Hoses
Cable protection cover - network hose - 105°C
Compressed air flat hose - HILCOFLEX
PVC - flat hose - super-light
PVC - pressure hose - medium-heavy
PVC - pressure hose - heavy
Manual operated binding device for binding hoses from 25 mm to 110 mm
Flat-and pressure hose - Typ ESSKA
PVC-Flat Hose-Light
Universal - Flat Hose - Light
High Pressure - Flat Hose - Light
Flat Hose - Antistatic - Light
Fire Hose - Light
Polyurethane-Flat Hose - Light Construction Type
PU Drinking water flat hose
Flat Hose - PVC - Color Blue
Water Hose - Polyurethane Inside - With Storz Suction Coupling
Flat Hoses - Inside Rubber - With Storz-Cooupling
Fire Hose - With Storz Coupling - 17 Bar - DIN 14811
Flat Hoses
High pressure painting hose - DN13 - 366bar - with 3/4"NPSM fitting for spraying systems by WIWA and GRACO
high pressure painting hose - DN4 - 465bar - with M 16x1.5 fitting for spraying systems by WAGNER
high pressure painting hose - DN4 - 465bar - with 1/4"NPSM fitting for spraying systems by WIWA or GRACO
high pressure painting hose - DN4 - 495bar - with 1/4"BSP fitting for spraying systems by BÖLLHOFF, HÜBNER or KRAUTZBERGER
high pressure painting hose - DN4 - 465bar - with 1/2x20 fitting JIC for spraying systems by KREMLIN or NORDSON
high pressure painting hose - DN6 - 430bar - with M 16x1.5 fitting for spraying systems by WAGNER
high pressure painting hose - DN6 - 430bar - with 1/4"NPSM fitting for spraying systems by WIWA or GRACO
high pressure painting hose - DN6 - 430bar - with 1/4"BSP fitting for spraying systems by BÖLLHOFF, HÜBNER or KRAUTZBERGER
high pressure painting hose - DN4 - 495bar - with 1/2x20 fitting JIC for spraying systems by KREMLIN or NORDSON
high pressure painting hose - DN6 - 600bar - with M 16x1.5 fitting - for spraying systems by WAGNER
High pressure painting hose - DN6 - 600bar - with fitting 1/4"NPSM - for sprying systems by WIWA or Graco
high pressure painting hose - DN6 - 600bar - with 1/4"BSP fitting - for spraying systems from Böllhoff, Hübner and Krautzberger
high pressure painting hose - DN10 - 330bar - with M 16x1.5 fitting for spraying systems by WAGNER
high pressure painting hose - DN10 - 330bar - with 1/2x20 JIC fitting for spraying systems by KREMLIN or NORDSON
High pressure painting hose - DN10 - 330bar - with 3/8"NPSM fitting for spraying systems by WIWA or GRACO
high pressure painting hose - DN10 - 330bar - with 3/8"BSP fitting for spraying systems by BÖLLHOFF, HÜBNER or KRAUTZENBERGER
high pressure painting hose - DN10 - 530bar - with M 16x1.5 fitting - for spraying systems by WAGNER
high pressure painting hose - DN10 - 530bar - with 3/8"NPSM fitting - for spraying systems by WIWA, Graco
high pressure painting hose - DN10 - 530bar - with 3/8"BSP fitting - for spraying systems from BÖLLHOFF, HÜBNER and KRAUTZBERGER
high pressure painting hose - DN13 - 265bar - with 1/2"NPSM fitting for spaying systems by WIWA or GRACO
high pressure painting hose - DN13 - 265bar - with 1/2"BSP fitting for spraying systems by BÖLLHOFF, HÜBNER or KRAUTZENBERGER
high pressure painting hose - DN13 - 430bar - with 1/2"NPSM fitting for spraying systems by WIWA or GRACO
high pressure painting hose - DN13 - 430bar - with 1/2"BSP fitting - for spraying systems by BÖLLHOFF, HÜBNER and KRAUTZBERGER
High Pressure Spray Hoses
high pressure painting hose - DN4 - 170bar - with fitting M 16x1.5 for spraying systems by WAGNER
high pressure painting hose - DN4 - 170bar - with fitting M 16x1.5 for spraying systems by WIWA or GRACO
high pressure painting hose - DN4 - 170bar - with fitting 1/4" BSP for spraying systems by BÖLLHOFF, HÜBNER or KRAUTZENBERGER
high pressure painting hose - DN4 - 170bar - with fitting 1/2x20 JIC for spraying systems by KREMLIN or NORDSON
high pressure painting hose - DN4 - 310bar - with fitting M 16x1.5 for spraying systems by WAGNER
high pressure painting hose - DN4 - 310bar - with fitting 1/4"NPSM for spraying systems by WIWA or GRACO
high pressure painting hose - DN4 - 310bar - with fitting 1/4"BSP for spraying systems by BÖLLHOFF, HÜBNER OR KRAUTZENBERGER
high pressure painting hose - DN4 - 310bar - with fitting 1/2x20 JIC for spraying systems by KREMLIN or NORDSNON
high pressure painting hose - DN6 - 270bar - with fitting M 16x1.5 for spraying systems by WAGNER
high pressure painting hose - DN6 - 270bar - with fitting 1/4"NPSM for spraying systems by WIWA or GRACO
high pressure painting hose - DN6 - 270bar - with fitting 1/4"BSP for spraying systems by BÖLLHOFF, HÜBNER or KRAUTZBERGER
high pressure painting hose - DN6 - 270bar - with fitting 1/2x20 JIC for spraying systems by KREMLIN or NORDSON
high pressure painting hose - DN10 - 300 bar - with fitting M 16x1.5 for spraying systems by WAGNER
high pressure painting hose - DN10 - 300bar - with fitting 3/8"NPSM for spraying systems by WIWA or GRACO
high pressure painting hose - DN10 - 300bar - with fitting 3/8"BSP for spraying systems by BÖLLHOFF, HÜBNER or KRAUTZBERGER
High Pressure Spray Hoses
low pressure painting hose - EPDM hose core - 20 bar - olive green
low pressure painting hose - EPDM hose core - 20 bar - olive green - coil (40m)
low pressure painting hose with brass fitting 1/4" (both ends) - EPDM hose core - 20 bar - DN6 - olive green
low pressure painting hose with brass fitting 1/4" (both ends) - EPDM hose core - 20 bar - DN9 - olive green
low pressure painting hose - NBR hose core - 20 bar - green - yard ware
low pressure painting hose - NBR hose core - 20 bar - green - coil (40m)
low pressure painting hose with brass fitting 1/4" (both ends) - NBR hose core - 20 bar - DN6 - green
low pressure paint hose - PA hose core - 15 bar - hyaline - yard ware
low pressure paint hose - PA hose core - 15 bar - hyaline - coil (40m)
low pressure paint hose - PA hose core - 15 bar - hyaline - coil (40m)
low pressure paint hose - PA hose core - 15 bar - hyaline - coil (40m)
low pressure paint hose - PA hose core - 15 bar - light blue - yard ware
low pressure paint hose - PA hose core - 15 bar - light blue - coil (40m)
low pressure paint hose DN6 - PA hose core - 15 bar - light blue
low pressure paint hose DN9 - PA hose core - 15 bar - light blue
low pressure paint hose - PA hose core - 15 bar - black - yard ware
low pressure paint hose - PA hose core - 15 bar - black - coil (40m)
low pressure paint hose DN6 - PA hose core - 15 bar - black
low pressure paint hose DN9 - PA hose core - 15 bar - black
Chemical resistant rubber hose with fabric inlay and steel spiral wire
Low Pressure Paint Hoses
Paint Hoses
Aquarium Hose
Water Hose"GREENLINE"
Water Hose "ARROFLEX"
First Class Water Hose "ORIGINAL-ALFAFLEX"
PVC - water hose - fabric-strengthens
Garden Hose - Set
PVC - Water hose - fabric-strengthens
PVC - water hose with fabric reinforcement - red
Water hose
PVC Water Hoses
PVC canvas hose - pink - roll ware
PVC - fabric reinforced - food safe
PVC - pressure hose - coolingflexibly
PVC - fabric reinforced hose - for the potable water supply
PVC - pressure hose
PVC - fabric reinforced hose - blue-transparent
PVC - fabric reinforced hose - red-transparent
PVC - fabric reinforced hose - green-transparent
PVC - Hose - Food Safe
PVC Reinforced
PVC - hose - food safe
PVC - hoses - oil resistant
PVC Hoses
PVC Hoses
Water Hose "REDCORD" - Rubber / PVC
Rubber Flex Rubber-Water Hose "STANDARD"
Washing Machine Inmlet Hoses - 13,0 x 3,5 mm - Color Grey
Washer Drain Hoses - 19,0 x 3,5 mm - Color Grey
Rubberflex Rubber-Water Hose
Rubber Flex Rubber Hose
INDUSTRY Rubber-Water Hose
PHOENIX Rubber-Water Hose TRIX-ROTSTR®
Rubber - Water Hoses
LPG And Natural Gas Hose
Gas Hoses
Steam-hoses type A 164°C / 6 bar
Steam-hoses type B 210°C / 18 bar
EPDM - high temperature hose with textile insert
Steam Hoses
Fuel hose / oil hose
Fuel Hose Type B - Material NBR - 10 bar - DIN 73379
Fuel Hose Type E - Material CR-NBR - 10 bar - DIN 73379
Fuel hose / oil hose - 15 bar
Fuel hose / ÖKO-Diesel - 10 bar
Chemical resistant rubber hose with fabric inlay and steel spiral wire
Fuel Hose Acc. To EN 12115 - Heavy Duty
Fueling Vehicle Hose Acc. To EN 12115 - Heavy Duty
Rubber Spiral Hoses - Oil Resistant - Black
Oil / Gasoline Hose - Black
Chemical Hoses
Sand blast hose - type SM 1 - high abrasion resitance - 12 bar - per meter length
Sand blast hose - type SM 1 - high abrasion resitance - 12 bar - complete rolls
Sand blast hose - type SM 1 - high abrasion resitance - 12 bar - compl. with couplings and nozzle holder
Sand blast hose - type SM 1 - high abrasion resitance - 12 bar - complete with couplings on both sides
Sand blast hose 12 - type SM2 - 12 bar - Standard - per meter
Sand blast hose 12 bar - type SM2 - complete rolls
Sand blast hose SM 2 - Ø 13x7 mm - Standard - with bronze coupling and nozzle holder
Sand blast hose - type SM2 - with coupling and nozzle holder
Concrete and grout pressure hose - black - 40 bar
Sand Blasting Hoses
Standard autogenous hose EN 559 - 9x3x5mm - 20bar - red
Plastic hose for pressurized air 9.0 x 14.5 mm 15 bar
High-pressure hoses - resistant to oil
Rubber hose for pressurized air - SBR - black
Rubber hose for pressurized air - EPDM - black
Rubber hose for pressurized air - yellow
Hot water hose - "Cobra-Green" - max. 95°C
Suction and pressure hose - black with red identity stripes
SBR suction and pressure hose / rollware
Air Hoses
Rubber Hoses
precision tube (ermeto) - stainless Steel 1.4301 (V2A) - wall thickness 1.0mm
precision tube (ermeto) - stainless Steel 1.4541 (V2A) - wall thickness 1.5mm
precision tube (ermeto) - stainless Steel 1.4541 (V2A) - wall thickness 2mm
precision tube (ermeto) - stainless Steel 1.4541 (V2A) - wall thickness 2,5mm
precision tube (ermeto) - stainless Steel 1.4541 (V2A) - wall thickness 3mm
Precision Steel Tube - Stainless Steel V2A
precision tube (ermeto) - Steel ST 37.4 galvanized - wall thickness 1.0mm
precision tube (ermeto) - Steel ST 37.4 galvanized - wall thickness 1.5mm
precision tube (ermeto) - Steel ST 37.4 galvanized - wall thickness 2.0mm
precision tube (ermeto) - Steel ST 37.4 galvanized - wall thickness 2.5mm
precision tube (ermeto) - Steel ST 37.4 galvanized - wall thickness 3.0mm
Precision Steel Tubes - Galvanized
precision tube (ermeto) - Steel ST 37.4 standard - wall thickness 1.0mm
precision tube (ermeto) - Steel ST 37.4 standard - wall thickness 1.5mm
precision tube (ermeto) - Steel ST 37.4 standard - wall thickness 2.0mm
precision tube (ermeto) - Steel ST 37.4 standard - wall thickness 2.5mm
precision tube (ermeto) - Steel ST 37.4 standard - wall thickness 3.0mm
Precission Steel Tubes - Standard
paged13700!0,,pexX00000000
PVC-Tubes
Aluminium Tube - For Plug Connector
Aluminium Tubes
threaded tube DIN 2440 - without/without - welded - glavanized
threaded tube DIN 2440 - without/without - seamless - galvanized
threaded tube DIN 2440 - with/with - seamless - galvanized
Malleable Cast Iron Threaded Pipes - Galvanized
threaded tube DIN 2440 - without/without - welded - black
threaded tube DIN 2440 - without/without - seamless - black
Malleable Cast Iron Threaded Pipes - Not Galvanized
Tubes
Swivel Joint With Male and Female Thread - Threefold - 360° Pivotable
Rapid swivel joint, 360° rotation
Rotary Passage Unions - Onefold - Up To 550 1/min
High pressure swivel
Rotary Passage Unions - Threefold Or Sixfold - Up To 300 1/min
Rotary Four Passage Union - 360° Pivotable - Up To 300 1/min
Rotary Flanged Feedthrough Unions - Twofold - Up To 300 1/min
Rotary Flanged Threefold Passgae Union - Up To 200 1/min
Rotary feedthrough, steel up to 420 bar
Rotary feedthrough - steel up to 315 bar
Rotary feedthrough - stainless steel up to 100 bar
Rotary feedthrough - stainless steel up to 160 bar
Universal Rotary Feedthrough Union With Rotating Internal Pipe - Left-Handed Thread - Up To 350 R/min - Up To PN 50
Universal Rotary Feedthrough Union With Stationary Internal Pipe - Left-Handed Thread - Up To 3500 R/min - Up To PN 50
Universal Rotary Feedthrough Union - Left-Handed Thread - Up To 3500 R/min - Up To PN 50
Universal Rotary Feedthrough Union With Rotating Internal Pipe - Right-Handed Thread - Up To 3500 R/min - Up To PN 50
Universal Rotary Feedthrough Union With Stationary Internal Pipe - Right-Handed Thread - Up To 3500 R/min - Up To PN 50
Universal Rotary Feedthrough Union - Right-Handed Thread - Up To 3500 R/min - Up To PN 50
Double Rotary Unions - Compression Fitting - 350 bar
Straight Rotary Union - Galvanized Steel - With Screw-In Thread - PN 350
Rotary Straight Union - Galvanized Steel - Compression Fitting - PN 350
L-Swivel Joint (2 Axis) - Galvanized Steel - 350 bar
Rotary Bulkhead Unions - Galvanized Steel - Compression Fitting - PN 350
Ball Bearing Banjo Unions - Galvanized Steel - With Screw-In Thread - PN 350
Rotary Elbow Bulkhead Union - Galvanized Steel - Compresion Fitting- PN 350
Rotary Elbow Banjo Union - Galvanized Steel - Compression Fitting - 350 bar
High Pressure Elbow Swivel Joint - Up To PN 400
Ball Bearing Swivel Joints - Stainless Steel - Up To 420 Bar
High Pressure Swivel Joint - Up To PN 500
Slide Bearing Elbow - Galvanized Steel - Metrical Thread - Light Construction Type - Up To 10 R/min
Slide Bearing Elbow Swivel Joints - Stainless Steel - Metric Thread - Light Construction Type - Up To 10 R/min
Slide Bearing Swivel Joints - Galvanized Steel - Imperial Thread - Light Construction Type - Up To 10 R/min
Slide Bearing Swivel Joints - Stainless Steel - Imperial Thread - Light Construction Type - Up To 10 R/min
Slide Bearing Swivel Joints - Stainless Steel - Metric Thread - Heavy Construction Type - Up To 10 R/min
Slide Bearing Swivel Joints - Stainless Steel - Metric Thread - Heavy Construction Type - Up To 10 R/min
Slide Bearing Swivel Joints - Galvanized Steel - Imperial Thread - Heavy Construction Type - Up To 10 R/min
Slide Bearing Swivel Joints - Stainless Steel - Imperial Thread - Heavy Construction Type - Up To 10 U/min
Ball Bearing Swivel Joints - Steel - Up To 420 Bar
Z-Swivel Joints (3 Axis) - Galvanized Steel - 350 bar
Swivel Joints
Sealing Plug For Brass Fittings
Cap Nut For Brass Fittings
Clamping Ring For Brass Fittings
Reducers For Brass Fittings
Accessories For Soldered Fittings
Soldered Fitting - Union Cross
Male Run Tee With Conical Male Thread
T-Unions With Conical Male Thread
T-Soldered Fitting
T-Swivel Unions - Positionable - With Polymed-Sealing
T-Shaped Soldered Fittings
Angle Union With Conical Male Thread
Angle Unions With Conical Male Thread
Angle Soldered Fitting
Soldered Angle Unions - Positionable - With Polymer Sealing
Angle Soldered Fittings
Soldered Straight Union With Conical Male Thread
Soldered Straight Union With Polymer-Sealing
Straight Unions With Conical Female Thread
Straight Soldered Unions
Soldered Fittings - Bulkhead Unions
Butt Weld Union - Straight - Steel Phosphated - Light Construction Type
Butt Welded Fittings - Straight Union - Stainless Steel - Light Construction Type
Butt Weld Union - Straight - Steel Phosphated - Heavy Construction Type
Butt Weld Union - Straight - Stainless Steel - Heavy Construction Type
Butt Welded Fittings - Straight Union - Stainless Steel (NC) - Light Construction Type
But Welded Unions - Straight - Stainless Steel (NC) - Heavy Construction Type
Straight Soldered Fittings
Soldered Fittings
Sealing Plug For Cutting Ring Unions
End Caps For Cutting Ruing Unions
Coupling plug for tube connections - incl. O-ring - steel - light version (L) - connection: metric
Reinforcing ring for tubes - brass
Reinforcing ring for tubes - stainless steel
Cutting ring - steel - ultra light version (LL)
Cutting ring - stainless steel - ultra light version (LL)
Cutting ring - steel - light version (L)
Cutting ring - stainless steel - light version (L)
Cutting ring - steel - heavy version (S)
Cutting ring - stainless steel - heavy version (S)
Connecting nut - steel - ultra light version (LL) - female thread: metric
Connecting nut - stainless steel - ultra light version (LL) - female thread: metric
Connecting nut - steel - light version (L) - female thread: metric
Connecting nut - stainless steel - light version (L) - female thread: metric
Connecting nut - steel - heavy version (S) - female thread: metric
Connecting nut - stainless steel - heavy version (S) - female thread: metric
Hexagonal nut for bulkhead fittings - steel - light version (L) - female thread: metric
Nut - brass - hexagonal - inch-Thread
Nut - brass nikel plated - hexagonal - inch-Thread
Nut - stainless steel - hexagonal - inch-Thread
Hexagonal nut for bulkhead fittings - stainless steel - light version (L) - female thread: metric
Hexagonal nut for bulkhead fittings - steel - heavy version (S) - female thread: metric
Hexagonal nut for bulkhead fittings - stainless steel - heavy version (S) - female thread: metric
Manual pipe bender
Manual pipe bender
Manual-hydraulic pipe bender
Manual-hydraulic pipe bender
Electronic Tube Bender 230V
Accesssory For Cutting Ring Unions
Equal cross fitting - steel - ultra light version (LL)
Equal cross fitting - stainless steel - ultra light version (LL)
Equal cross fitting - Stahl - light version (L)
Equal cross fitting - Edelstahl - light version (L)
Equal cross fitting - steel - heavy version (S)
Equal cross fitting - stainless steel - heavy version (S)
Cross Fitting
Swiveling Screw-Fitting Throttle Free, Metrical
Pivotable Steel Fitting - Whitworth Tube Thread - Galvanized Steel
Swivel-Union Throttle Free, Metrical, Stainless Steel
Banjo coupling - with O-ring and captive seal - steel - light version (L) - male thread: BSP
L-fitting male stud coupling - steel - ultra light version (LL) - male thread: metric
L-fitting male stud coupling - steel - light version (L) - male thread: metric
L-fitting male stud coupling - stainless steel - light version (L) - male thread: metric
L-fitting male stud - steel - heavy version (S) - male thread: metric
L-fitting male stud - stainless steel - heavy version (S) - male thread: metric
L-fitting male stud - steel - ultra light version (LL) - male thread: inch (NPT)
L-fitting male stud - steel - light version (L) - male threada: inch (NPT)
L-fitting male stud - stainless steel - light version (L) - male threada: inch (NPT)
L-fitting male stud - steel - heavy version (S) - male thread: inch (NPT)
L-fitting male stud - stainless steel - heavy version (S) - male thread: inch (NPT)
L-fitting male stud - steel - ultra light version (LL) - male thread: inch (BSP)
L-fitting male stud - stainless steel - ultra light version (LL) - male thread: inch (BSP)
L-fitting male stud - steel - light version (L) - male thread: inch (BSP)
L-fitting male stud - stainless steel - light version (L) - male thread: inch (BSP)
L-fitting male stud - steel - heavy version (S) - male thread: inch (BSP)
L-fitting male stud - stainless steel - heavy version (S) - male thread: inch (BSP)
Banjo coupling - stainless steel - heavy version (S) - male thread: BSP
L - Male Stud Fitting
T coupling - steel - ultra light version (LL) - male thread: metric
T coupling - stainless steel - ultra light version (LL) - male thread: metric
T coupling - steel - light version (L) - male thread: metric
T coupling - stainless steel - light version (L) - male thread: metric
T coupling - steel - heavy version (S) - male thread: metric
T coupling - stainless steel - heavy version (S) - male thread: metric
T coupling - steel - ultra light version (LL) - male thread: inch (NPT)
T coupling - steel - ultra light version (LL) - male thread: inch (NPT)
T coupling - steel - light version (L) - male thread: inch (NPT)
T coupling - stainless steel - light version (L) - male thread: inch (NPT)
T coupling - steel - heavy version (S) - male thread: inch (NPT)
T coupling - stainless steel - heavy version (S) - male thread: inch (NPT)
T coupling - steel - ultra light version (LL) - male thread: inch (BSP)
T coupling - stainless steel - ultra light version (LL) - male thread: inch (BSP)
T coupling - steel - light version (L) - male thread: inch (BSP)
T coupling - stainless steel - light version (L) - male thread: inch (BSP)
T coupling - steel - light version (L) - male thread: inch (BSP)
T coupling - stainless steel - light version (L) - male thread: inch (BSP)
T - Stud Fitting
Equal Tee fitting - steel - ultra light version (LL)
Equal Tee fitting - stainless steel - ultra light version (LL)
Equal Tee fitting - steel- light version (L)
Equal Tee fitting - stainless steel - light version (L)
Equal Tee fitting - steel - heavy version (S)
Equal Tee fitting - stainless steel - heavy version (S)
T-coupling - steel - ultra light version (LL)
T-coupling - steel - light version (L)
T-coupling - steel - heavy version (S)
T - Fitting
Male stud elbow fitting - steel - ultra light version (LL) - metric thread
Male stud elbow fitting - stainless steel - ultra light version (LL) - metric thread
Male stud elbow - steel - light version (L) - male thread: metric
Male stud elbow - stainless steel - light version (L) - male thread: metric
Male stud elbow - steel - heavy version (S) - male thread: metric
Male stud elbow - stainless steel - heavy version (S) - male thread: metric
Male stud elbow fitting - steel - ultra light version (LL) - male thread: inch (NPT)
Male stud elbow fitting - stainless steel - ultra light version (LL) - male thread: inch (NPT)
Male stud elbow fitting - steel - light version (L) - male thread: inch (NPT)
Male stud elbow fitting - stainless steel - light version (L) - male thread: inch (NPT)
Male stud elbow fitting - steel - heavy version (S) - male thread: inch (NPT)
Male stud elbow fitting - stainless steel - heavy version (S) - male thread: inch (NPT)
Male stud elbow fitting - steel - ultra light version (LL) - male thread: inch (BSP)
Male stud elbow fitting - stainless steel - ultra light version (LL) - male thread: inch (BSP)
Male stud elbow fitting - steel - light version (L) - male thread: inch (BSP)
Male stud elbow fitting - stainless steel - light version (L) - male thread: inch (BSP)
Male stud elbow fitting - steel - heavy version (S) - male thread: inch (BSP)
Male stud elbow fitting - stainless steel - heavy version (S) - male thread: inch (BSP)
Male Stud Elbow Cutting Ring Union
Equal elbow coupling - steel - ultra light version (LL)
Equal elbow coupling - stainless steel - ultra light version (LL)
Equal elbow coupling - steel - light version (L)
Equal elbow coupling - stainless steel - light version (L)
Equal elbow coupling - steel - heavy version (S)
Equal elbow coupling - stainless steel - heavy version (S)
Elbow bulkhead coupling - steel - ultra light version (LL) - female thread: metric
Elbow bulkhead coupling - steel - light version (L) - male thread: metric
Elbow bulkhead coupling - stainless steel - light version (L) - male thread: metric
Elbow bulkhead coupling - steel - heavy version (S) - female thread: metric
Elbow bulkhead coupling - stainless steel - heavy version (S) - female thread: metric
90°-Elbow - Adjustable - Galvanized Steel
Elbow Cutting Ring Union
Straight coupling - steel - light version (L) - female thread: metric
Straight coupling - stainless steel - light version (L) - female thread: metric
Straight coupling - steel - heavy version (S) - female thread: metric
Straight coupling - stainless steel - heavy version (S) - female thread: metric
Straight coupling - female thread - steel - light version (L) - connection: inch (BSP)
Straight coupling - stainless steel - light version (L) - female thread: inch (BSP)
Straight coupling - female thread - cutting ring union - heavy version - 1/4"...1 1/2" BSP
Straight coupling - stainless steel - heavy version (L) - female thread: inch (BSP)
Straight Thread Connection
Straight male stud coupling incl. sealing - steel - light version (L) - male thread: BSP
Straight male stud coupling - steel - ultra light version (LL) - male thread: metric
Straight male stud coupling -stainless steel - ultra light version (LL) - male thread: metric
Straight male stud coupling - steel - light version (L) - male thread: metric
Straight male stud coupling - stainless steel - light version (L) - male thread: metric
Straight male stud coupling - steel - heavy version (S) - male thread: metric
Straight male stud coupling - steel - ultra light version (LL) - male thread: NPT
Straight male stud coupling - stainless steel - ultra light version (LL) - male thread: NPT
Straight male stud coupling - steel - light version (L) - male thread: NPT
Straight male stud coupling - stainless steel - light version (L) - male thread: NPT
Straight male stud coupling - steel - heavy version (S) - male thread: NPT
Straight male stud coupling - stainless steel - heavy version (S) - male thread: metric
Straight male stud coupling - steel - ultra light version (LL) - male thread: inch (BSP)
Straight male stud coupling - stainless steel - ultra light version (LL) - male thread: inch (BSP)
Straight male stud coupling - steel - light version (L) - male thread: inch (BSP)
Straight male stud coupling - stainless steel - light version (L) - male thread: inch (BSP)
Straight male stud coupling - steel - heavy version (S) - male thread: inch (BSP)
Straight male stud coupling - stainless steel - heavy version (S) - male thread: inch (BSP)
Straight male stud coupling - stainless steel - heavy version (S) - male thread: NPT
Straight male stud coupling - brass - heavy version (S) - male thread: inch (BSP)
Straight Union - Light Construction Type - Stainless Steel 1.4571 - With Soft Ring Sealing
Straight Union - Heavy Construction Type - Stainless Steel 1.4571
Straight Male Stud Connections
Straight coupling - steel - ultra light version (LL)
Straight coupling - steel - heavy version (S)
Straight coupling - steel - light version (L)
Straight coupling - stainless steel - ultra light version (LL)
Straight coupling - stainless steel - light version (L)
Straight coupling - stainless steel - heavy version (S)
Straight reduction coupling - steel - ultra light version (LL)
Straight reduction coupling - stainless steel - ultra light version (LL)
Straight reduction coupling - steel - light version (L)
Straight reduction coupling - stainless steel - light version (L)
Straight reduction coupling - steel - heavy version (S)
Straight reduction coupling - stainless steel - heavy version (S)
Bulkhead coupling - steel - ultra light version (LL)
Bulkhead coupling - steel - light version (L)
Bulkhead coupling - stainless steel - light version (L) - thread: metric
Bulkhead coupling - steel - heavy version (S)
Bulkhead coupling - stainless steel - heavy version (S) - thread: metric
Non-return valve tube-tube - steel - heavy version (S)
Straight Sleeve Fittings
Compression Fittings
T-Connectors - Aluminium - 16 bar
Aluminium Elbows - 16 bar
Distribution Rack Alu 4-Line - Max 16 bar
Distribution Moulding 4-Lines - 1x Inlet - 3x Outlets - M5-1/2"
Distrubition Molding Alu 8-Lines - 2x Inlets - 8x Outlets - M5-1/2"
Cross Distribution Rack Alu 9/12 Lines - Max. 16 bar
2-Fold Terminal Block Single Sided - Aluminium - 16 bar
Fourfold Terminal Blocks Double Sided - Aluminium - 16 bar
6-Fold Terminal Block - Aluminium - Unilateral Outlets - 16 bar
8-Fold Terminal Block Double Sided - Aluminium - 16 bar
Fourfold Terminal Block - Aluminium - Single Outlets - 16 bar
Aluminium Fittings
Thread adaptor - various excecutions available
Connector S60 x 6 female to G2" female for Schütz-Container
Connector S60 x 6 female to G2" male-thread for Schütz-Container
Connector S 60x6 female to hose tails for Schütz-Container
Connector S60 x 6 female to NPS 2" male-thread for Schütz-Container
Connector S60 x 6 female to RD 65x1/6 male thread (milkthread) for Schütz-Container
Reducing connector S100 x 8 female to S60 x 6 male for Schütz-Container
Connector S100 x 8 female to G3" male for Schütz-Container
Connector with female thread to camlock male thread for Schütz-Container
Connector NPS 2" female to S60 x 6 male thread for Schütz-Container
Adapter wide outer thread to 2" inner thread, e.g. for plastic drums
Drum Adapter For Discharge Valves
Adapters
Tees With Female Thread - Plastic - PN 10
Famale Tee - PVC-U - PN 10
PVC-U Tees
PVC-U Tee - PN 16
PVC-U Pipe T-Coupler
T-Connector - Plastic - 10 bar
Plastic T-Pieces
Angle 90° PVC-U - PN 16
Elbow 45° PVC-U - PN 16
Elbows 90° PVC-U
Elbow 45° PVC-U
Plastic Elbows - 10bar
Plastic Elbow 90° Female - Polypropylene
Plastic Elbow 90° Female - PVDF
Plastic Elbows
Reducing Nipple with female and male thread - plastic
Pipe Reducers, Short PVC-U - PN 16
Reducing Nipples PVC-U Short Type (Only For Plastic Threads)
Reducing Nipples - PVC-U (Only For Plastic Threads)
Plastic Reducing Nipples
Threaded Muffles - POLYPROPYLENE - Outer Hexagon
PVC-U Socket - PN 16
PVC-U Ferrules
Male Pipe Union - PN 16
Straight Coupler - PN 16
PVC-U Pipe Fittings - Straight Couplers - PN 16
PVC-U Sleeve
PVC-U Pipe Coupler
PVC-U End Cap - PN 16
PVC- U Reducing Tees - PN 16
Plastic Muffles
PVC-U Double Nipple
Cleaner For PVC-U Pipes
PVC Pipe Holder 110mm
Cement For PVC-Fittings
Brush For PVC-Adhesive
PVC-U Flange Sleeve For Lapped Flange - PN 16
Flat Gasket For PVC-U Lapped Flange
PVC-U Nipples, Inner And Outer Adhesion Surface
PVC Pipes 110x8,1 MM
PVC-U Loose Flange
O-Rings For PVC-Fittings
PVC-U Hose Connector
Bulkhead Union (Tank Connection)
Cleaner For PVC-U
PVC-Adhesives For PVC-Fittings
PVC-U Cap
PVC-U End Caps
Double Nipples With Cylindrical Thread - Polypropylene
Double Nipples With Cylindrical Thread - PVDF
Plastic Double Nipples
Plastic Fittings
Cross-distributor 180 C1 - equal - female thread
Cross-distributor 180 C1 - equal - reduced - female thread
Elbowdistributor 221 90°- Za1 - equal - female thread
T-distributor 223 90°- Za2 - equal - female thread
T-distributor 165 45° - equal - female thread
Y-distributor 220 45°- equal - female thread
Cross-Pieces - Galvanized Malleable Cast Iron - PN 16
Air Deflectors - Twofold - Galvanized Malleable Cast Iron - PN 16
Malleable Iron Distributor
Elbow union 97 90° - UA2 - equal - female thread - flat sealed
Elbow union 95 90° - UA1 - equal - female thread - flat sealed
Elbow union 98 90° - UA12 - equal - male and female thread - bevelled sealed
Elbow union 100 90° - equal - male and female thread - flat sealed
Elbow union 101 90° - equal - male thread - flat sealed
Elbow union 102 90° - equal - male and female thread - bevelled sealed
Elbow union 103 90° - equal - male thread - bevelled sealed
Elbow union 96 90° - UA11 - equal - female thread - bevelled sealed
Malleable Iron Unions - Angled -
union 330 even - U1 - equal - female thread - flat sealed
Union 335 straight - male and female thread - flat sealed
union 331 even - U2 - equal - male and female thread - flat sealed
union 336 even - equal - male thread - flat sealed
Union 344 Straight - male thread - bevelled sealed
union 340 even - equal - female thread - bevelled sealed
Unions 341 straight - equal - female and male thread - bevelled sealed
Malleble Iron Unions - Straight -
T-Connector 130 - 90° - outlet reduced or enlarged - female thread
T-Connector 131 E1 - 90° - equal - female thread
T-Connector 131 - 90° - outlet reduced - female thread
T-Connector 131 E1 - 90° - passageway and outlet equal or reduced - female thread
T-Connector 132 E2 - 90° - equal - Female Thread -
T-Connector 134 - 90° - equal - passageway m-/f- thread - outlet f-thread
T-connector 133 90° - equal - outlet female thread - passageway male thread
T-Connector 134 - 90° - outlet reduced - passageway m-/f-thread - outlet f-thread
T-connector 135 90° - equal - male thread
T-Connector 130 - 90° - outlet reduced or enlarged - passage reduced - female thread
T-connector 137 90° - outlet reduced - outlet female thread - passageway male thread
T-connector 130 90° B1 - equal - female thread
Malleable Iron T- Pieces
Bends 40 45° long G4, with bush and male thread - Malleable Cast Iron
Bends 41 45° long G1, with two bushes - Malleable Cast Iron - female thread
Bends 50 30°, with bush and male thread - Malleable Cast Iron - galvanized
Bends 51 30°, with bushes and female thread - Malleable Cast Iron - galvanized
Bends 53 15°, with bush and male thread - Malleable Cast Iron - galvanized
Bends 54 15°, with 2 bushes and female thread - Malleable Cast Iron - galvanized
Bends 2 90° long G1, 2 x inner thread (2 x bushes) - Malleable Cast Iron
Bends 2 90° long G1, 2 x inner thread (2 x bushes) - Malleable Cast Iron
Bends 1 90° long G4 inner- / outer thread
Bends 1A 90° short D4 inner- / outer thread
Bends 2A 90° short D1, 2 x inner thread (2 x bushes) - Malleable Cast Iron
Double Bends 60, open with female thread - Malleable Cast Iron - galvanized and not galvanized
Malleable Iron Bends
Elbows 90 A1 90° equal - Inner Thread -
Elbows 92 A4 90° equal - Female and Male Thread -
Elbows 92 A4 90° - female thread reduced -
Elbows 121 A4 - 45° - equal - Male and Female Thread -
Elbows 120 A1 - 45° - equal - Female Thread -
Elbows 94 - 90° - equal - Male Thread -
Elbows 92 A4 90° reduced - Male Thread reduced -
Elbows 90 A1 90° reduced - Inner Thread -
Angle 471 90 ° - Malleable Cast Iron - galvanized - female thread -
Malelable Iron Elbows
Ruducing Nipples 241 ISO N4 Form 2 - Malleable Cast Iron - galvanized and not galvanized
Reducing Nipple 241 ISO N4 - Malleable Cast Iron - galvanized and not galvanized
Reducing Muffe With Conical Male Thread and Cylindrical Female Thread - Galvanized Malleable Iron
Reducing Nipple With Conical Male And Cylindrical Female Thread - Galvanized Maleable Iron
Ruducing Nipples 241 ISO N4 Form 3 - Malleable Cast Iron - galvanized and not galvanized
Reducing Pieces
Square Plugs 291 - without edge - Malleable Cast Iron - galvanized and not galvanized -
Square Plugs 290 with edge - Malleable Cast Iron - galvanized and not galvanized
Square plugs with conic thread - melleable iron zinc plated
Malleable Cast Iron Eccentric Reducing Bushes 260, available black and galvanized
Extension Bushes 526 - Malleable Cast Iron - Galvanized and not galvanized
Reducing Bushes 271 - Malleable Cast Iron - galvanized and not galvanized - right/left thread
Caps 300 - Malleable Cast Iron - hexagonal with edge
Reducing Bushes 270 - Malleable Cast Iron - galvanized and not galvanized - standard
Reducing Bushes 240 - Malleable Cast Iron - galvanized and not galvanized
Locking Cap - Annealed Cast Iron - Galvanized And Not Galvanized - Round
Locking Cap - Annealed Cast Iron - Galvanized And Not Galvanized
Reducing Bushes 246 - Annealed Cast Iron - Galvanized and not galvanized
Reducing Bushes + Plugs
Malleable Cast Iron Double Thread Nipples 281, available black and galvanized - right-left thread
Malleable Cast Iron Double Thread Nipples 280, available black and galvanized
Double Thread Nipple 245 - Malleable cast iron - galvanized and not galvanized - reduced
Malleable Cast Iron Long double thread Nipples, galvanized
Simple thread Nipple 531 - Malleable cast iron - galvanized and not galvanized -
Double Thread Nipples
Malleable Iron Pipe Fittings
It will be soon available
Female T-Connectors - Galvanized Steel - Up To 345 Bar
T-Connector With Thread Measured In Inches (60° Universal Cone Nipple) - Galvanized Steel - Up To 400 Bar
T-Piece Female - Stainless Steel - Up To 350 bar
T-Connector With JIC-Thread - Galvanized Steel - Up To 310 Bar
T-Connector With NPT Thread - Galvanized Steel - Up to 345 Bar
High pressure T-connector
T-Connector With NPT Thread - Stainless Steel - Up to 345 Bar
Tee - NPT Thread 1 x Male and 2 x Female Thread - Galvanized Steel - Up To 350 Bar
Tee - NPT Thread 1 x Male and 2 x Female Thread - Stainless Steel - Up To 350 Bar
Tee With Thread Measured in Inches (60° Universal Cone Nipple) - Male Thread - Galvanized Steel - Up To 475 Bar
T-Piece With Thread Measured In Inches (60° Universal Cone Nipple) - Male Thread - Stainless Steel - Up To 475 Bar
Tee With NPT-Thread - 1 x Female and 2 x Male Thread - Galvanized Steel - Up To 275 Bar
T-Piece With Thread Measured In Inches (60° Universal Cone Nipple) - Male Thread - Galvanized Steel - Up To 475 Bar
Tee With Thread Measured in Inches (60° Universal Cone Nipple) - Male Thread - Stainless Steel - Up To 475 Bar
Tee With JIC-Thread - Male Thread - Galvanized Steel - Up To 310 Bar
T-Connector With JIC-Thread - Male Thread - Stainless Steel - Up To 310 Bar
T-Piece With NPT-Thread - Male Thread - Galvanized Steel - Up To 345 Bar
T-Connector With Thread Measured In Inches (60° Universal Cone Nipple) - Stainless Steel - Up To 400 Bar
High Pressure T-Pieces
High Pressure Adapter - 90° Elbow - Galvanized Steel - With 60° Sealing Cone
High pressure adapter with 45° angle
High Pressure-Elbow 90° - Edelstahl VA 1.4571 - mit 60° Dichtkegel
High Pressure Adapter - 90° Elbow - Stainless Steel 1.4571 - With 60° Sealing Cone
High Pressure Elbows
Hydraulik thread reducing fitting
High Pressure Adapter with Sleeve Nut
High Pressure Reducing Fittings
Square Plugs with elasomer seal - steel zinc plated
Square plugs with NPT thread - steel zinc polated
Square Plugs with elastomer seal - steel zinc plated - metric
Square plugs with o-ring and UNF thread
Square Plugs with elasomer seal - stainless steel 1.4571
Square plugs with o-ring and UNF thread
Square plugs with NPT thread
High Pressure Blind Plugs
Muffle - Galvanized Steel - With Thread Measured In Inches
Straight Muffle - Bothsided Cap Nut - Galvanized Steel - 60° Universal Sealing Cone - Up To 575 bar
Muffle - Stainless Steel 1.4571 - With Thread Measured In Inches
Stright Muffle - Bothsided Cap Nut - Stainless Steel 1.4571 - 60° Universal Sealing Cone - Up To 575 bar
High Pressure Muffles
High pressure fittings with 60° conus
High Pressure Double Nipples With NPT/G-Thread - Galvanized Steel
Double Nipple With Inch Thread (60° Universal Sealing Cone) - Stainless Steel - up to 400 bar
High pressure fitting - Stainless steel
High Pressure Double Nipples
High Pressure Fittings
CK-Quick Couplers - Straight With Cylindrical Thread - Stainless Steel
Air Deflector Twofold - Stainless Steel - PN 16
Stainless Steel Distributors
Threaded Union With Female Thread - Conical Sealing - Stainless Steel
Weld-On Nipple - Flat Sealing - Stainless Steel
Threaded Union - Female/Male Thread - Conical Sealing - Stainless Steel
Threaded Union With Female Thread - Flat Sealing - Stainless Steel
Union With Female And Male Thread - Flat Sealing - Stainless Steel
Straight Union Separable With Male Thread - Conical Sealing - Stainless Steel
Weld On Fittings - With Female Thread - Flat Sealing - Stainless Steel
Butt Weld Unions With Female Thread - Conical Sealing - Stainless Steel
Butt Welded Fittings With Male Thread - Conical Sealing - Stainless Steel
Weld-On Threaded Male Nipple - Flat Sealing - Stainless Steel
Butt Weld Double Nipple - Conical Sealing - Stainless Steel
Divisible Threaded Unions With Male Thread - Flat Sealing - Stainless Steel
Stainless Steel Fittings
Female Tee - Stainless Steel - PN 16
Stainless Steel T-Pieces
Elbow With NPT-Thread - Galvanized Steel
Angle With Thread Measured In Inches - 60° Universal Cone Nipple - Galvanized Steel
Elbow With NPT-Thread - Stainless Steel
Bulkhead Elbow With Thread Measured In Inches - 60° Universal Cone Nipple - Galvanized Steel
Angle 90° Female And Male Thread - Stainless Steel
Stainless Steel Elbows
Reducing Nipples With NPT-Thread - Galvanized Steel
Reducing Nipple With JIC-Thread/NPT-Thread - Galvanized Steel
Reducing Nipples With JIC-Thread/G-Thread - Galvanized Steel
Reducing Nipples - Stainless steel
Reducing Nipples - Male NPT Thread - Cylindrical Female G-Thread - Stainless Steel
Reducing Nipple Cylindrical Male G-Thread - Female NPT-Thread - Stainless Steel
Reducing Nipple - Conical Male R-Thread - Female NPT-Thread - Stainless Steel
Reducing Nipples With JIC-Thread - Galvanized Steel
Hydraulic Reducing Bush With Cylindrical Female and Male Thread - Stainless Steel
Reducing Nipple With JIC/G-Thread - Stainless Steel
Reducing Nipples With NPT-Thread - Stainless Steel
Reducing Nipple - Male NPT-Thread - Cylindrical Female G-Thread - Galvanized Steel
Extension Nipple With NPT-Thread - Stainless Steel
Reducing Nipples With JIC Thread - Stainless Steel
Stainless Steel Reducing Nipples
Square Plugs with elastomer seal - stainless steel 1.4571 - metric
Square Plugs with hexagon head - stainless steel 1.4571
Square Plugs with hexagon head - stainless steel 1.4571
Square Plugs with allen screw - stainless steel
Square Plugs with allen screw - stainless steel 1.4571
Square plugs with conic thread - stainless steel 1.4571
Square Plugs with hexagon head with coil - stainless steel 1.4571
Stainless Steel Blind Plugs
Fitting Extensions With NPT-Thread - Galvanized Steel
High Pressure Adapter With Cap Nut - Stainless Steel
Stainless Steel Muffles
Double Nipple With Conical Thread - Stainless Steel
Double Nipple With Cylindrical Thread - Stainless Steel
Double Nipple With Thread Measured in Inches (60° Universal Conical Nipple) - Galvanized Steel
Double Nipple With NPT mit NPT-Gewinde - Stainless Steel - Up To 345 bar
Doube Nipple With G And NPT-Thread - Stainless Steel
Double Nipple With Metric/JIC-Thread - Galvanized Steel
Double Nipple With NPT-Thread - Galvanized Steel
Bulkhead Straight Union With Metric Thread (60° Universal Cone Nipple) - Galvanized Steel
Bulkhead Straight Union With Metric Thread (60° Universal Cone Nipple) - Stainless Steel
Double Nipple With Metric G/JIC-Thread - Galvanized Steel
Double Nipples With NPT/JIC-Thread - Galvanized Steel
Double Nipple With NPT/JIC-Thread - Stainless Steel
Double Nipple With Metric G/JIC-Thread - Stainless Steel
Double Nipples With JIC-Thread - Galvanized Steel
Double Nipple With JIC-Thread - Stainless Steel
Nipple - Stainless Steel
Nipple - Galvanized Steel Pipe St37
Stainless Steel Double Nipples
Stainless Steel Fittings
Y-Piece - 2 x Female Thread And 1 Male Thread - Nickel-Plated Brass - PN 16
Cross - Nickel-Plated Brass - PN16
Wall Socket - Elbow - Brass - PN 16
Y-piece DN 7,2 in Dual and Triple Distributor, Brass
Air Deflector - Twofold - Brass - PN 16
Cross Terminal Block - Brass - 16 Bar
Air Deflector - Triple - Brass - PN 16
Brass Distribution Tube - 2 or 3 Outlets With Female Thread - Prolongable
Nickel Plated Brass Tube Dividers - Male Thread - Prolongable
Distributor for wall fastening
Tube Distributor With Female Thread - Nickel-Plated Brass - Prolongable
Air Deflectors - Twofold - Complete With Female Thread And Socket Couplers NW 7,2 Assembled
Brass Distribution Tube - 2 Or 3 Outlets - Prolongable
Wall Socket With Plug Connection - Brass - PN 16
Brass Distributors
Hexagon Union Separaple With Male Thread - Conical Sealing - Brass
Threaded Unions - Male Thread - Conical Sealing - Nickel-Plated Brass
Threaded Union - Female/Male Thread - Conical Sealing - Brass
Union With Female And Male Thread - Flat Sealing - Brass
Divisible Threaded Unions With Male Thread - Flat Sealing - Brass
Threaded Union With Female Thread - Flat Sealing - Brass
Threaded Union - Female Thread - Conical Sealing - Brass
Brass Fittings
Tees - Untreated Brass - 16 Bar
T-Connections - Nickel-Plated Brass - 16 Bar
Tees - 1 x Male And 2 x Female Thread - Nickel-Plated Brass - PN 16
Tees - Male Thread - Nickel-Plated Brass - PN 16
Tees - 1 x Female and 2 x Male Thread - Brass - PN 16
Female Tees - Nickel-Plated Brass - PN 16
Tees - 2 x Female And 1 x Male Thread - Brass - PN 16
Tee - 1 x Female and 2 x Male Thread - Nickel-Plated Brass - PN 16
Tee - Male Thread - Brass - PN 16
Tees - With Male x Female x Male Thread - Nickel-Plated Brass - PN 16
Tees - 2 x Female And 1 x Male Thread - Nickel-Plated Brass - PN 16
T-connection - brass - female thread
Brass T-Pieces
Elbow fitting 90° - male threads
Brass Elbow - 16 bar
Nickel-Plated Brass Elbow
Brass Elbows, PN 16
Male Elbow - Nickel Plated Brass
Angle 90° With Female Thread - Nickel-Plated Brass - PN 16
Elbow 90° Nickel-Plated Brass
Elbow fitting 90° - female threads
Slap bracket
Brass Elbows
Reducing nippel
Reducing Nipples With Cylindrical G Thread Without Collar - Brass
Reducing Nipples With Metrical Thread - Brass
Reducing Nipples With Cylindrical Male and Female Thread - Nickel-Plated Brass
Reducing Nipple - Male Conical R-Thread - Female NPT-Thread - Brass
Reducing Nipples Cylindrical Male G-Thread - Female NPT-Thread - Brass
Reducing Nipples - Male NPT-Thread - Cylindrical Female G-Thread - Brass
Reducing Nipple With JIC/NPT Thread - Stainless Steel
Brass Reducing Nipples
Square Plugs with allen screw - brass
Square Plugs with allen screw
Square Plugs with allen screw - brass
Square Plugs with allen screw - brass nickel plated
Square Plugs with hexagon head
Square Plugs with hexagon head
Plugg, outer 3/8" - inner hexagon - brass
Brass Blind Plugs
Connecting sleeve - brass
swivel joint, 360° rotation
Muffles/Reducing Muffles - Round - Brass
Brass Thread Extension With Inner Square
Brass Thread Extension With Inner Square
Brass Muffles
Double Nipple With Cylindrical Threads - Nickel Plated Brass
Double Nipples With Conical Thread - Nickel-Plated Brass - PN 16
Double nipples - brass
Double Nipple With Conical Thread - Brass/Red Brass - PN 16
Double Nipple With Imperial And Metric Thread - Brass
Double Nipple With Cylindrical RH and LH-Thread - Brass
Double Nipple With Cylindrical LH Threads - Brass
Nipples - Brass
Brass Double Nipples
Brass Fittings
Fittings And Unions
Guillemin-Coupling With Female Thread Without Locking Ring - Aluminium
Guillemin-Coupling With Male Thread Without Locking Ring - Aluminium
Guillemin-Coupling With Male Thread And Locking Ring - Aluminium
Guillemin-Coupling With Female Thread and Locking Ring - Aluminium
Guillemin-Coupling With Female Thread Without Locking Ring - Stainless Steel
Guillemin-Coupling With Female Thread And Locking Ring - Stainless Steel
Guillemin-Coupling With Male Thread Without Locking Ring - Stainless Steel
Guillemin-Coupling With Male Thread And Locking Ring - Stainless Steel
Guillemin-Installation Wrench - Galvanized Steel
Guillemin-Coupoling - Scroll Tail Suitable for Composite Hose With Locking Head - Stainless Steel
Guillemin-Coupoling - Scroll Tail Suitable for Composite Hose With Locking Head - Aluminium
Guillemin-Coupling With Hose End And Locking Head - Stainless Steel
Guillemin-Coupling With Hose End And Locking Head - Aluminium
Guillemin-Blanking Cap With Locking Head - Stainless Steel
Guillemin-Blanking Cap With Chain - Aluminium
Guillemin Couplings
WEER coupling, outer thread
WEER coupling
WEER Couplings
Gardena - Tap Connector With Male Thread
Gardena - Hose Connector With Female Thread
Gardena - Hose Repairer
GARDENA Y-Hose To Hose Connector Coupling
Gardena - Water Stop Hose Connector
Gardena - Water Stop Hose Connector
Y-Distributor
Gardena Garden Couplings
Straight Unions - PFA
Screw-On Hose Fittings
Straight Bulkhead Unions - PFA
T-Hose Connectors - PFA
Male Angle Hose Connectors - PFA
Sealing Ring And Compression Ring - PFA
Knurled Nut - PFA
Union Tees - PFA
Angle Hose Connector - PFA
Angle Bulkhead Union - PFA
PFA Hose Fittings
hose connection - straight - PA
Hose Unions - Straight - PVDF
Straight Unions - PVDF
Straight Bulkhead Unions - PVDF
Straight Hose Connector For TX-Fabric Hoses - PVDF - Up To 10 bar
Straight Hose Connector For TX-Fabric Hoses - PVDF - Up To 10 bar
Male Angle Hose Connector - PVDF
Angle Unions - PVDF
Angle-Hose Connetor - PVDF
Angle Bulkhead Union - PVDF
Angle Hose Connector For Fabric Hoses TX - PVDF - Up To 10 Bar
Angle Hose Connector For Fabrir Hoses TX - PVDF - Uo To 10 Bar
Union T - PVDF
T- Hose Connector - PVDF
T-Connector For TX-Fabric Hoses - PVDF - Up To 10 Bar
T-Union For Fabric Hoses TX - PVDF - Up to 10 Bar
Knurled Nut - PVDF
Clamping Ring - PVDF
PVDF Hose Fittings
hose connection - straight - PA
Hose Unions - Straight - PP
Straight Hose Connectors - PP
Straight Bulkhead Unions - PP
Straight Hose Connector For TX-Fabric Hoses - PP - Up To 10 bar
Straight Hose Connector For TX-Fabric Hoses - PP - Up To 10 bar
Male Angle Hose Connector - PP
Angle Unions - PP
Angle Hose Connector - PP
Angle Bulkhead Unions - PP
Angle Hose Connector For TX-Fabric Hoses - PP - up to 10 Bar
Angle-Hose Connector For TX-Fabric Hose - PP - Up To 10 bar
Union Tees - PP
T-Hose Connector - PP
T-Connector For TX-Fabric Hoses - PP Up To 10 Bar
T-Unions For Fabric Hoses TX - PP - Up To 10 Bar
Clamping Rings - PP
PP Hose Fitings
Hose Unions - Straight - PA
Hose Connector - Straight - PA
hose connection - straight - PA
Unions - Straight - PA
Stright Bulkhead Union - PA
Male Elbow Hose Connector - PA
Angle Female Hose Connector - PA
Angle-Hose Connector - PA
Angle Bulkhead Unions - PA
Union Tees - PA
T-Hose Connectors - PA
PA Hose Fittings
Hose Fittings - PA, PP, PVDF, PFA
Hard-PVC Sealing Rings
Nickel-Plated Brass Cap Nuts
Plastic Cap Nuts
Aluminium Cap Nuts
Stainless Steel Cap Nuts
Hollow Screw Twofold With Female Thread - Nickel-Plated Brass
Counternut For Bulkhead Unions - Stainless Steel
Cap Nut With Bend Protection - Nickel-Plated Brass
Sealing Cap For CK-Unions - Plastic
Simple Hollow Screw With Female Thread - Brass
Simple Hollow-Core Screw - Nickel-Plated Brass
Simple Hollow Screws With Female Thread - Nickel-Plated Brass
Aluminium Simple Hollow Screw
Simple Hollow Screw - Stainless Steel
Hollow Screws Twofold - Steel
Hollow Unions Twofold - Nickel-Plated Brass
Hollow-Core Screw Threefold - Galvanized Steel
Hollow-Core Screws Threefold For CV-Quick Unions - Nickel-Plated Brass
L-Banjo Union With Push-in Connector - Nickel-Plated Brass
L-Banjo Push-In Connector - Nickel-Plated Brass
L-Banjo Unions - Nickel-Plated Brass
L-Banjo Union - Plastic
L-Banjo Union - Aluminium
L-Banjo Union - Stainless Steel
Female L-Banjo Union - Nickel-Plated Brass
Female L-Banjo Union - Aluminium
T-Banjo Union With Push-In Connectors - Nickel-Plated Brass -
T-Banjo Union With Push-In Connectors - Nickel-Plated Brass - -20°C Up To +150°C
Banjo Union - Nickel-Plated Brass
Banjo Union With T-Screw - Plastic
Banjo Unions With Female Thread - T-Union - Aluminium
Banjo Union T-Screws - Aluminium
Banjo Union With T-Screw - Stainless Steel
Choke Ball Valve - Adjustable Supply Air - With Knurled Screw - G 1/8" To G 1/4"
Choke Ball Valve - Exhaust Air And Supply Air Regulation - With Slotted Screw - CK-Fitting - G 1/8" To G 3/8"
Choke Ball Valve - Adjustable Exhaust Air - With Slotted Screw - G 1/8" To G 1/2"
Choke Ball Valve - Adjustable Exhaust Air - With Slotted Screw - CK-Screw- M 5 To G 1/4"
Accessoriers for CK-Hose Fittings
CK-Quick Coupling - Straight With NPT Thread - Stainless Steel
CK-Quick Couplings - Female Straight Unions - Stainless Steel
CK-Fittings - Bulkhead Coupler - Stainless Steel
Straight Hose Connector Union For TX-Fabric Hoses - Stainless Steel - Up to 10 Bar
Angle Hose Connector For TX-Fabric Hoses - Stainless Steel - Up to 10 bar
CK-Fittings - Elbow Couplers - Stainless Steel
CK-Fittings - L-Hose Connector Union - Stainless Steel
CK-Fittings - T-Hose Connector Union - Stainless Steel
CK-Fitting - T-Hose Connector Union - Stainless Steel
T-Union - Multipart CK-Fitting - Stainless Steel
Angle-Union - Stainless Steel
CK-Quick Couplers - Cross-Union - Stainless Steel
CK- Hose Fittings - Plastic
Bulkhead coupling
CK-Fittings - Bulkhead Connectors - Plastic
Ck-Fittings - Conical Elbow Unions - Plastic
CK-Fittings - L-Hose Connector Union - Plastic
CK-Fitting - T-Hose Connector - Plastic
CK-Fittings - T-Hose Connector Union - Plastic
Choke Ball Valve - Adjustable Exhaust Air - With Slotted Screw - CK-Screw - M G 1/8" To G 1/4"
Choke Ball Valve - Adjustable Exhaust Air - With Slotted Screw And Counter Nut - CK-Fitting - Nickel-Plated Brass Banjo Union - G 1/8" To G 1/4"
Choke Ball Valve - Adjustable Exhaust Air - With Knurled Screw And Counter Nut - CK-Fitting - Plastic Banjo Union - M 5 To G 1/4"
Throttle Check Valves - Adjustable Air Supply - With Slotted Screw And Counter Nut - CK-Fitting - Plastic Banjo Union - G 1/8" To G 1/4"
Choke Ball Valve - Adjustable Supply Air - With Knurled Screw And Counter Nut - Female Thread - Plastic Banjo Union - G 1/8" To G 1/4"
Choke Valve - Adjustable Supply Air - With Knurled Screw And Counter Nut - CK-Fitting - Plastic Banjo Union - G 1/8" To G 1/4"
Choke Ball Valves - Supply Air And Exhaust Air Regulation - With Slotted Screw - CK-Fittings - Banjo Union - G 1/8" To G 1/4"
CK- Hose Fittings - Plastic
CK-Quick Couplers - Straight With Cylindrical Threads - Aluminium
CK-Quick Couplers - Female Cap Unions - Aluminium
CK-Fittings - Straight Union With Bulkhead Thread - Aluminium
CK-Fittings - Bulkhead Unions - Aluminium
CK-Fittings - L-Unions - ALuminium
CK-Fittings - Female Angle Hose Unions - Aluminium
CK-Fitting - T-Hose Unions - Aluminium
CK-Fitting - T-Hose Connector With Female Thread - Aluminium
Straight Union For Silver Hoses / Metal Braided Hoses - Aluminium
Straight Hose Connector For TX-Fabric Hoses - Aluminium - Up to 10 Bar
L-Straight Union For Silver Hoses / Metal Braided Hoses - Aluminium
Angle Hose Connector Union For TX-Fabric Hoses - Aluminium - Up To 10 Bar a
Choke Ball Valve - Adjustable Exhaust Air - With Slotted Screw - CK-Screw - M 5 To G 1/4"
Choke Ball Valve - Adjustable Exhaust Air - With Slotted Screw And Counter Nut - CK-Fitting - Alumninium Banjo Union - G 1/8" To G 1/4"
Choke Ball Valve - Adjustable Exhaust Air - With Knurled Screw And Counter Nut - CK-Fitting - Aluminium Banjo Union - G 1/8" To G 1/4"
Choke Ball Valve - Adjustable Supply Air - With Knurled Screw And Counter Nut - Aluminium Banjo Union - G 1/8" To G 1/4"
Throttle Check Valves - Adjustable Air Supply - With Slotted Screw And Counter Nut - CK-Fitting - Aluminium Banjo Union - G 1/8" To G 1/4"
Choke Ball Valve - Adjustable Supply Air - With Knurled Screw And Counter Nut - Female Thread - Aluminium Banjo Union - G 1/8" To G 1/4"
Choke Ball Valves - Exhaust And Supply Regulation - With Slotted Screw - CK-Fitting - Aluminium Banjo-Union - G 1/8" To G 1/4"
CK- Hose Fittings - Aluminium
CK-Fittings - Female T-Hose Connector - Nickel Plated Brass
CK-Fittings - L-Hose Connector Union - Nickel Plated Brass
CK-Fittings - T-Hose Connectors - Nickel-Plated Brass
CK-Fittings - T-Hose Fitting 360° Pivotable - Nickel Plated Brass
CK-Fittings - Swivel T-Hose Coupler - Nickel Plated Brass
CK-Fittings - T-Hose Union - Nickel Plated Brass
CK-Fittings - Conical T-Hose Connector - Nickel Plated Brass
CK- Hose Fittings - Brass - T-Design
CK-Fittings - Female Angle Union - Nickel Plated Brass
CK-Fittings - Conical Angle Hose Unions - Nickel Plated Brass
CK-Fittings - L-Unions - Nickel Plated Brass
CK-Fittings - Female Angle Union - Nickel Plated Brass
CK-Fittings - Elbow Couplers - Nickel Plated Brass
CK-Fittings - Cylindrical 360° Pivotable Angle Swivel Joint - Nickel Plated
CK-Fittings - Elbow Swivel Joints 360° Pivotable - Nickel Plated Brass
Cross Quick Couplers - Nickel Plated Brass
Choke Ball Valve - Adjustable Exhaust Air - With Slotted Screw And Counter Nut - CK-Fitting - Nickel-Plated Brass Banjo Union - G 1/8" To G 1/4"
Choke Ball Valve - Adjustable Exhaust Air - With Knurled Screw And Counter Nut - CK-Fitting - Nickel-Plated Brass Banjo Union - M 5 To G 1/4"
Choke Ball Valve - Adjustable Supply Air - With Knurled Screw - Nickel-Plated Banjo Union - M5 To G 1/4"
Throttle Check Valves - Adjustable Air Supply - With Slotted Screw And Counter Nut - CK-Fitting - Nickel-Plated Brass Banjo Union - G 1/8" To G 1/4"
Choke Ball Valve - Exhaust Air And Supply Air Regulation - With Slotted Screw - CK-Fitting - Nickel-Plated Banjo Union - M5 To G 1/4"
CK-Sviwel Joints - Elbow-Swivel Joint 360° Pivotable - With Antikink Spiral - Nickel Plated Brass
CK- Hose Fittings - Brass - Angled Design
CK-Hose Fitting - Straight With Cylindrical Thread - Galvanized Brass
CK-Quick Couplers - Straight With Conical Thread - Nickel Plated Brass
CK-Quick Couplings - Straight With NPT Thread - Brass
CK-Fittings - Female Cap Unions - Nickel Plated Brass
CK-Quick Couplers - Straight With Cylindrical Threads and Antikink Protection - Nickel Plated Brass
CK-Quick Couplings - Straight 360° Pivotable For Spiral Hoses - Nickel Plated Brass
CK-Quick Couplers - Straoght 360° Pivotable - Nickel Plated Brass
CK-Quick Couplings - 360° Pivotable - For Spiral Hoses - Brass
CK-Fittings - Bulkhead Connectors - Nickel Plated Brass
Tube Fitting With Male Thread And Wing Nuts
CK- Hose Fittings - Brass - Straight
CK- Hose Fittings - Brass
Hose Fittings
Plastic Hose Barb With Conical Thread - PN 8
Hose Barb With Cylindrical Thread - PP - PN 10
PVC-U Hose Connector (Only For Plastic Threads) - PN 16
Plastic T-Hose Nozzle - PN 8
Plastic Elbow Hose Connector - PN 8
Plastic Hose Nozzles
Male Hose Connector (metrical) 60° Inner Cone (DIN 3863)
Galvanized Steel Hose Barb With Cylindrical Thread And Inner Cone - PN 25
Hose Connectors With Male Thread Securing Bond
Female Hose Connector With Securing Band - Galvanized Steel - PN 25
Complete Hose Connector With Safety Band - Steel/Malleable Cast Iron - DIN 8537/20033
Hose Connector For Muffler Clamps DIN 2826 - Galvanized Steel - 100 bar
Hose Nozzles With Pivotable Cap Nut For Clamp Collars DIN 2826 - Galvanized Steel - 100 bar
Steel Hose Nozzles
Cap Nuts For Hose Nozzles - Stainless Steel - PN 40
Stainless Steel Hose Barbs With Conical Thread - PN 16
Threaded nozzle - stainless steel
Stainless Steel Weld Hose Barbs - PN 50
Hose Barb With Conical Thread Without Band - Stainless Steel - PN 50
Hose Nozzle - Stainless Steel - PN 40
Hose Connector With Fixed Female Thread - Stainless Steel - PN 40
Hose Nozzles With Cap Nut - Stainless Steel - PN 40
Hose Nozzles With Cap Nut And Securing Band For Muffler Clamps - Stainless Steel - DIN 2817
Male Hose Connector With Securing Band For Muffler Clamps
Hose Nozzle With Cap Nut - Left-Hand-Thread - Stainless Steel - 40 bar
Hose Nozzle For Clamp Collars DIN 2826 - Stainless Steel - 100 bar
Hoze Nozzle With Pivotable Cap Nut For Clamp Collars DIN 2826 - Stainless Steel - 100 bar
Stainless Steel Hose Nozzles
Hose connector - brass
Hose connector with outer thread
Hose Barb With Conical Thread - Nickel-Plated Brass - PN 16
Hose Barb With Cylindrical Thread - Nickel-Plated Brass - With NBR O-Ring - PN 30
Hose Nozzle With Cylindrical Thread - Inner Cone - PN 10
Hose Connector With Metrical Thread - PN 16
Hose Connector With Cylindrical Left Hand Thread - Inner Cone - PN 16
Hose Connector With Fixed Female Thread - Brass - PN 16
Hose Connector With Metrical Thread - Brass - PN 16
Hose Connector With Fixed Female Thread - Steel-Plated Brass - PN 16
Hose Nozzles - Brass - PN 16
Cap Nuts For Hose Nozzles - Brass - PN 16
Hose Nozzles With Cap Nut - Brass - PN 16
Hose Nozzles With Cap Nut - Left-Handed-Thread - Brass - PN 16
Hose Nozzle With Cap Nut - Nickel-Plated Brass - PN 16
Banjo Union With Hose Connector - PN 16
Brass Elbow Hose Nozzle - PN 16
L-Hose Connector - Brass - PN 16
Pivoting Hose Barb - PN 12
Hose Nozzle With Cap Nut And Securing Band For Muffler Clamps - Brass - DIN 2817
Male Hose Connector With Securing Band For Muffler Clamps DIN 2817
Hose Nozzle For Clamp Collars DIN 2826 - Brass - 40 bar
Hose Nozzle With Pivotable Cap Nut for Clamp Collars DIN 2826 - Brass - 40 bar
Threaded Nozzle With Cylindrical Thread - Inside Cone
Brass Hose Connectors
Threaded Nozzles And Hose Connectors
Seals for Hoseliners and Pipe Connectors - Dairy Pipe Fittings
Female Hoseliner - Stainless Steel - Dairy Pipe Fittings
Weld Liner - Dairy Pipe Fittings - Stainless Steel - with EPDM seals
Hose Adapters - Dairy Pipe Fittings - Stainless Steel - with EPDM seals
Hose Adapters - Stainless Steel - with safety collar
Hexagon Cap Nuts - Stainless Steel -
Black Threaded Pipe Connector End for Slotted Round Nuts - Stainless Steel -
Hook Wrenches for Slotted Round Nuts - Stainless Steel -
Coned Pipe Connectors
Seals for Hoseliners and Pipe Connectors - Dairy Pipe Fittings
Dairy End Caps - Stainless Steel -
Black Nut plus Chain - Stainless Steel -
Shrink-wrap Threaded Pipe Connectors - Stainless Steel - with EPDM seals
DIN Hoseliner - 316L Stainless Steel - Dairy Pipe Fittings
Hose Thread Pipe Connectors - Stainless Steel - with EPDM seals
Male Hoseliners - Stainless Steel - Dairy Pipe Fittings - with safety collar
Double Nipple with round thread - Stainless Steel -
Double Nipple with round thread - Stainless Steel - reduced
Hook Wrenches for Slotted Round Nuts - Stainless Steel -
Thread Pipe Connectors
Dairy Pipe Fittings
It will be soon available
It will be soon available
Kamlock Socket Couplers - Aluminium
Kamlock-Adaptors - Aluminium
Coupler and connector - camlock - 2" Aluminium
Camlok - Adapter
Lever coupling, female with flange
Camlok - Type DF
It will be soon available
It will be soon available
Lever Couplings Acc. To DIN 2828 - Male Adaptor - Weld-On End
Lever Couplings Acc. To DIN 2828 - Female Adaptor - Weld-On End
Camlok - Type AW
Lever coupling clip - male adapter - camlok - Typ DP - norm DIN 228 or MIL-C-27487
Lever coupling clip - male adapter - camlok - Typ DP - norm DIN 228 or MIL-C-27487
Lever coupling clip - male adapter - camlok - Typ DP - norm DIN 228 or MIL-C-27487
Lever coupling clip - male adapter - camlok - Typ DP - norm DIN 228 or MIL-C-27487
Lever coupling clip - male adapter - camlok - Typ DP - norm DIN 228 or MIL-C-27487
Camlok - Type DP
Female Coupler With Hose Stem (DIN 2828) Part C
Camlock with hose connector and safety clamps 16 bar female part
Kamlock Coupler to Hose Tail Part C
Connector camlock (female) to hose tail for Schütz-Container
Camlok - Type C
Lever coupling - female adapter - camlok - Type B - female thread
Kamlock-Coupling Male Coupler Part B
Camlok - Type B
Female Coupler - Female Threaded (DIN 2828) Part D
Kamlock Couplings Coupler Female Part D
Connector 2" camlock female to 2" female thread for Schütz-Container
Camlok - Type D
Lever coupling cap - female adapter - camlok - Typ DC - norm DIN 228 or MIL-C-27487
Lever coupling cap - female adapter - camlok - Typ DC - norm DIN 228 or MIL-C-27487
Lever coupling cap - female adapter - camlok - Typ DC - norm DIN 228 or MIL-C-27487
Lever coupling cap - female adapter - camlok - Typ DC - norm DIN 228 or MIL-C-27487
Lever coupling cap - female adapter - camlok - Typ DC - norm DIN 228 or MIL-C-27487
Kamlock-End Caps With Locking Chain Part DC
Camlok - Type DC
Camlock with hose connector and saftyclamps 16 bar male part
Camlok - Type E
Lever coupling - male adapter - type F - camlock - male thread
Lever coupling - male adapter - type F - camlock - male thread
Lever coupling - male adapter - type F - camlock - male thread
Lever coupling - male adapter - type F - camlock - male thread
Lever coupling - male adapter - type F - camlock - male thread
Camlok - Type F
Lever coupling - male adapter - type A - camlock - male thread
Lever coupling - male adapter - type A - camlock - male thread
Lever coupling - male adapter - type A - camlock - male thread
Lever coupling - male adapter - type A - camlock - male thread
Lever coupling - male adapter - type A - camlock - male thread
Camlok - Type A
Lever Couplings
Sealings For Tank Truck Couplings - Acc. To DIN 28450
Thread Sealer For Tank Truck Couplings MK And VK - Acc. To DIN 28450
Tank Truck Coupling - V-adapter with female thread (male coupling)
Tank Truck Coupling - union-coupler (female coupling)
Sealing ring tank truck coupling - for female adapter
Sealing ring tank truck coupling - for female adapter
Cap for tank truck coupling
Blind plug for tank truck coupling
Tank Truck Coupling - V-adapter with safety clamps (male coupling) - one-piece version
Tank Truck Coupling - M-adapter with safety clamps (female coupling) - one-piece version
Tank Truck Coupling - V-adapter with safety clamps (male coupling) - threaded version
Tank Truck Coupling - M-adapter with safety clamps (female coupling) - threaded version
Storz Coupling - with forged aluminium clamps
Cardan Coupling - male adapter - with forged aluminium clamps
Cardan Coupling - male adapter - with forged aluminium clamps
Tank Truck Couplings
Gasket - accessories for mortar coupling
Crimping socket for hydraulic crimping
Pin for lever - accessories for mortar coupling
Mortar hose coupling - DN 25 - female adapter - one lever
Mortar hose coupling - DN 25 - female adapter - two levers
Mortar hose coupling - DN 25 - female adapter - one lever - for hydraulic crimping
Mortar hose coupling - DN 25 - female adapter - two levers - for hydraulic crimping
Mortar hose coupling - size 35 - female adapter - two levers
Mortar hose coupling - size 35 - female adapter - two levers - hydraulic crimping
Mortar hose coupling - size 50 - female adapter - two levers
Mortar hose coupling - size 50 - female adapter - two levers - for hydraulic crimping
Mortar coupling - DN 25 - female thread 1" - female adapter - one lever
Mortar coupling - DN 25 - female thread 1" - female adapter - two levers
Mortar coupling with female thread - size 35 - female adapter - two levers
Mortar coupling with female thread - size 50 - female adapter - two levers
Mortar coupling with male thread - size 50 - female adapter - two levers
Mortar hose coupling - DN 25 - male adapter
Mortar hose coupling - DN 25 - male adapter - for hydraulic crimping
Mortar hose coupling - DN 25 - rotatable 360° - male adapter - for hydraulic crimping
Mortar coupling with female thread - DN 25 - male adapter
Mortar hose coupling - size 35 - male adapter
Mortar hose coupling - size 35 - male adapter - hydraulic crimping
Mortar coupling - female thread - size 35 - male adapter
Mortar hose coupling - size 50 - male adapter
Mortar hose coupling - size 50 - female adapter - two levers - for hydraulic crimping
Mortar coupling with female thread - size 50 - male adapter
Mortar coupling - male adapter on both sides
Stem with male thread - for mortar coupling
Stem with male thread - for mortar couplings - hydraulic crimping
Crimping socket for hydraulic crimping
Mortar Couplings
Straight hose connection - Ø 3 mm up to 25 mm
Straight hose connection, reducing - 3 mm up to 13 mm
Universal hose connection, standard or reducing - 3 mm bis 15 mm
Universal hose connection, PVDF - 5 mm to 17 mm
Hose connection for laboratories
Angle hose connection - Ø 3 mm up to 25 mm
T- hose connection - Ø 3 mm up to 25 mm
T- hose connection reducing - 4 mm to 13 mm
Y-hose connection - Ø 3 mm up to 19 mm
Multibox 56-pieces - hose binder with plastic box
Plastic Hose Connector
Perbunan sealing for hose couplings with adjustment ring
Perbunan sealing for hose couplings
EPDM sealing for hose couplings
Gaskets for chrome steel claw couplings
Cap for claw coupling - brass
Three-way manifold - for water couplings - brass
Three-way manifold with water couplings - brass
Claw coupling - end cap - chrome steel
Accessory For GEKA-Couplings
Claw coupling - female thread - brass
Claw coupling - female thread - chrome steel
GEKA-Couplings With Female Thread
Claw coupling - male thread - brass
Claw coupling - male thread - chrome steel
GEKA-Couplings With Male Thread
Claw coupling - hose connection - brass
Claw coupling with adjustment ring - hose connection - brass
Claw coupling - hose connection 360° rotatable - brass
Claw coupling - hose connection gland - chrome steel
GEKA System - Claw Couplings - Hose Connectors - 360° Pivotable
GEKA System - Elbow Claw Coupling - Hose Connector - 360° Pivotable
GEKA System - Claw Coupling - Hose Connector
GEKA System - Garden Hose Claw-Couplers - Thread Connection
GEKA-Couplings With Hose Connection
GEKA-Water Couplings
Control-Keys for Above- and under ground hydrant, pit hook
Storz-manifold-twofold with ball valve
Storz-manifold-twofold with ball valve
Storz-manifold-ternary with ball valve
Storz-manifold-ternary with valve barrier
Storz Distributor
Spare-seal for Storz-couplings - installation size DIN 25-D
Key for Storz-couplings - installation size DIN 25-D
Storz-couplings - installation size DIN 25-D - with rotary hose-adaptor
Storz-couplings - installation size DIN 25-D - with rotary hose-adaptor for parings-binder
Storz-fixcouplings - installation size DIN 25-D - with outer-thread
Storz-fixcouplings - installation size DIN 25-D - with outer-thread
Storz-fixcouplings - installation size DIN 25-D - with outer-thread
Storz-manifold to flange PN 16 - installation size DIN 25-D
Storz-blind-coupling with chain - installation size DIN 25-D
Storz-Blind Cap & Chain - Installation Size DIN 32
Storz-Blank Cap & Chain - DIN 100
Storz-Blind Cap And Chain - Installation Size DIN 38
Storz-Blind Cap & Chain - Installation Size DIN 65
Storz-Blind Cap & Chain - Installatio Size DIN 90
D-Couplings
Spare-seal for Storz-couplings - installation size DIN 52-C
Storz-fixcouplings - installation size DIN 52-C - with outer-thread
Storz-couplings - installation size DIN 52-C - with rotary hose-adaptor
Storz-fixcouplings - installation size DIN 52-C - with outer-thread
Storz-blind-coupling with chain - installation size DIN 52-C
Storz-couplings - with rotary 50° hose-adaptor - installation size DIN 52-C
Key for Storz-couplings - installation size DIN 110-A, 75-B, 52-D, 25-C
Storz-couplings - installation size DIN 52-C - with rotary hose-adaptor for parings-binder
Storz-fixcouplings - installation size DIN 25-D - with outer-thread
Storz-manifold - installation size DIN 52-C to 25-D
Storz-manifold to flange PN 16 - installation size DIN 52-C
Storz-blind-coupling with chain - installation size DIN 25-D
Storz-collector's piece without check valve
Conductor-basket guard for Storz-strainer
Storz-strainer with return valve and depleter
C-Couplings
Spare-seal for Storz-couplings - installation size DIN 75-B
Key for Storz-couplings - installation size DIN 110-A, 75-B, 52-D, 25-C
Storz-fixcouplings - installation size DIN 75-B - with outer-thread
Storz Coupling - Installation Size 75-B - Brass
Storz-fixcouplings - installation size DIN 75-B - with outer-thread
Storz-blind-coupling with chain - installation size DIN 75-B
Storz-couplings - installation size DIN 75-B - with rotary hose-adaptor for parings-binder
Storz-couplings - installation size DIN 75-B - with rotary hose-adaptor
Storz-fixcouplings - installation size DIN 25-D - with outer-thread
Storz-manifold - installation size DIN 75-B auf 52-C
Storz-Manifold - Installation Size 75-B/65 - Brass
Storz-manifold to flange PN 16 - installation size DIN 75-B
Storz-collector's piece without check valve
Storz-blind-coupling with chain - installation size DIN 25-D
Conductor-basket guard for Storz-strainer
Storz-strainer with return valve and depleter
B-Couplings
Spare-seal for Storz-couplings - installation size DIN 110-A
Key for Storz-couplings - installation size DIN 110-A, 75-B, 52-D, 25-C
Pellet blind-coupling
Storz-blind-coupling with chain - installation size DIN 25-D
Storz-couplings - installation size DIN 110-A - with rotary hose-adaptor
Storz-couplings - installation size DIN 110-A - with rotary hose-adaptor for parings-binder
Storz-fixcouplings - installation size DIN 110-A - with outer-thread
Storz Couplings - Installation Size 65 - Brass
Storz-blind-coupling with chain - installation size DIN 110-A
Storz-fixcouplings - installation size DIN 110-A - with outer-thread
Storz-fixcouplings - installation size DIN 25-D - with outer-thread
Storz-manifold - installation size DIN 110-A to 75-B
Storz-manifold to flange PN 16 - installation size DIN 110-A
Conductor-basket guard for Storz-strainer
Storz-strainer with return valve and depleter
A-Couplings
Tank Truck Couplings
Spare parts for couplings
End caps DIN 3484/3489
Claw Coupling - Closure
Replacement Sealants For Hose Couplings - Viton
Accessory For Bajonet Couplings
Female couplings DIN 3482/3489
Female couplings with holes for retaining pins
Female couplings with brass gasket
Female couplings DIN 3238 with milled ring
Bajonet Couplings With Male Thread
Male couplings DIN 3481/3489
Male couplings with holes for retaining pins
Male couplings with brass gasket
Male couplings DIN 3238 with milled ring
Bajonet Coupling With Male Thread
Hose couplings DIN 3483/3489
Hose couplings with retaining collar
Hose couplings with retaining collar - With holes for retaining pins
Hose couplings with brass gasket
Hose couplings DIN 3238 with milled ring
Bajonet Couplings With Hose Clip
Bajonet Couplings
Protection Rings For Push-In Air Fittings
Push-In Cartridges - Plastic
Brass Push-In Cartridge
Stud To Close Up Push In Air Fittings
Blanking Caps To Close Hose Pipelines
Male Hose Coupler For PVC-Hoses
Tube Reducer Connector
Silencers With Push-In Nipple
Pressure Gauge For Utility Lines
Step Drill Bits For Force Fitting Cartridges
Plug Connectors Accessories
Air Saving Valves - With Female Thread
Air Saving Valve - With Push-In Connector
Air Saving Valve - With Union
Air Saving Valves
Differential Pressure Regulator - Depending On Primary Pressure
Pressure Regulating Valves - Without Pressure Gauge - For Push-In Fittings
Pressure Regulating Valve With Pressure Gauge - For Push-In Fittings
Plug - Pressure Regulating Valves
Ball Valve - With Male Thread And Plug-Connection - Passage From Thread To Hose
Ball Valve- With Mal Thread and Plug Connection - Passage from Thread to Hose
Ball Valve - With Plug Connection
Ball Valve - With Cylindrical Male Thread And Plug Connector - Passage From Thread To Hose
Ball Valves - With Cylindrical Male Thread and Plug Connection - Passage From Thread To Hose
Plug - Balll Valves
Throttle Ball Valves - Angle Type - Supply Air Regulation
Throttle Ball Valves - Angle Type - Exhaust Air Regulation
Throttle Ball Valve - Straight Type
Throttle Ball Valve - Standard - Exhaust Air Regulation - With Knurled Head Screw
Throttle Ball Valves - Straight Type - Exhaust Air Regulation
Throttle Ball Valve - Angle Type With Cylindrical Thread - Exhaust Air Regulation
Throttle Ball Valves - Special Form - Supply Air Regulation
Plug - Throttle Ball Valves
3/2-Way-Valves - Push-In Fitting on Both Sides
3/2-Way-Valves - With Male Thread and Push-In Connector - Passage From Hose To Thread
3/2-Way Valve - With Male Thread On Both Sides
3/2-Way Valves - With Male Thread and Push-In Connection - Passage From Thread to Hose
3/2-Way Valvel - With Cylindrical Male Thread On Both Sides
3/2-Way Valve - With Cylindrical Male Thread and Push-In Connector - Passage From Thread to Hose
3/2-Way-Valves - With Cyndrical Male Thread and Push-In Fitting - Passage From Thread to Hose
3/2-Way Stop Valves
Lock Valve - With Male Thread and Push-In Connector
Lock Valves - With Push-In Connectors
Lock Valves - With Cylindrical Thread and Push-In Connector
2/2 ways hand lock valve with plug connector - modell VHK - tube to tube
Bulkhead Lock Valves - With Push-In Connector
Angle Lock Valves - With Male Thread and Push-In Connector
Angle Lock Valves - With Cylindrical Male Thread and Push-In Connection
Angle Lock Valve - With Push-In Connector
Bulkhead-Angle-Lock Valve
2/2-Way Shut-Off Valves
Plug Valves And Fittings
Angle plug connection for hose to hose - 3x same diamater - model KQ2D
Cross plug connection for hose to hose - model KQ2TW
Cross plug connection for hose to hose - 2x reduced diamater - model KQ2TX
Cross plug connection for hose to hose - 3x reduced diamater - model KQ2ty
plug connection "Y" for hose to hose - 3x same diamater - model KQ2U
plug connection model KQ2U - plug connection "Y" - hose to hose - 2x reduced diameter
plug connection - model KQ2UD - 4-way-plug connection - hose to hose - 4x reduced diameter
plug-in connection for plug to hose - 3x same diamater - model KQ2u
plug-in connection for plug to hose - 2x reduced diamater - model KQ2X
4-way plug-in connection for plug to hose - 4x reduced diamater - model KQ2XD
Angle plug connection for hose to hose - 3x same diamater - model KQ2LU
Push-In Distributor - Threefold - With Cylindrical Thread
Multiple Push-In Connectors - Threefold
Push-In Distributors - Fourfold
Push-In Distributors - Twofold - With Cylindrical Thread
Y-Connectors - With Female Thread
Y-Push-In Connector - With Hexagon Head
L-Push-In Connectors -With Cylindrical Female and Male Thread
L-Connectors - With Female And Male Thread
Push-In Distributor - Sixfold - With Cylindrical Thread
Multiple Push-In Connector - Sixfold
Multiple Push-In Connector - Fourfold - With Cylindrical Thread
Mini-Cross-Push-In Connectors
Mini-Y-Stem Connectors - Mini-Y-Stem Connectors With 2 Reduced Outlets
Mini-Y-Stem Connector - Reducing Mini-Y-Stem Connector
Multiple Connector With 4 Reduced Outlets
Multiple Stem Connector and 4 Reduced Outlets
Multiple T-Tube With 3 Reduced Outlets
Multiple T Stem Connectors With 3 Reduced Outlets
Cross-Push-In Connector With 2 Reduced Outlets
Reduced-Cross With 3 Reduced Outlets
Cross Connector
Y-Stem Connector - Reduced Y-Stem Connenctor
Y-Stem Connectors - Reduced Y-Stem Connector
Multiple Connectors With Male Thread
Multiple Connector - With Cylindrical Male Thread
Multiple Tee Connector - With Male Thread And 3 Reducing Outlets
Multiple T-Connectors - With Cylindrical Male Thread and 3 Redurcing Outlets
Multiple Tee Connector - With Male Thread And 6 Reducing Outlets
Y-Angle Connector
Y-Connector
Y-Connector - With Cylindrical Thread
Multiple Push-In Connector, Twofold
Plug Junction
t-piece with screw-in connection for thread to hose - model KQ2Y
T-screw-in connection for thread to hose - model KQ2T
Male Run Tee Connectors
Mini Tee Connector
Male T-Connector
T-Connectors With Thread
T-Push-In Connector - With Female Thread
T-Quick Coupler - Stainless Steel - Positionable
T- Socket Connector - Stainless Steel - With Conical Thread - Positionable
T- Socket Connection - With NPT-Thread - Positionable
T-Shapes Screw-In Plug Connection
T-plug connection with reduction for hose to hose - 1x reduced - model KQ2T
T-plug reduction for hose to hose - 2x reduced - model KQ2T
T-plug connection for hose to hose - for equal diameter - model KQ2T
Mini-T-Stem Connector - Mini-T-Stem Connector Reduced
Reduced T-Stem Connectors
T-Push-In Connectors
T-Quick Connector - Stainless Steel
T-Connector - Stainless Steel
Tee Shaped Plug Connection
L-Push-In Connectors With Cylindrical Female Thread
screw-in angle connection - hose to thread - female thread - KQ2LF
Elbow Screw-On Plug Connection
L-Plug Connection - Long Body
Angled-Plug Connector
Push-In L-Connector - Long Body With Cylindrical Thread
L-Plug Connectors - Long
Push-In L-Connector With Hexagon Head
Push-In L-Connector With Cylindrical Thread And Hexagon Head
L-Push-In Connector With Cyindrical Thread And Hexagon Head
L-Plug Connector - Long
L-Push-In Connectors With Hexagon Recess
L-Push-In Fitting - Self Locking
L-Air Couplers - With Cylindrical Thread - Self Locking
Mini-L-Plug Connector
Mini-L-Plug Connector - Long
L-Quick Connector - Stainless Steel - Fixed
Elbow Plug Connectors - Stainless Steel - With Cylindrical Thread - Positionable
L-Quick Connectors - Stainless Steel - Positionable
L-Quick Couplings - Stainless Steel - With Cylindrical Thread
L-Coupling - Stainless Steel - With Conical Thread - Positionable
L-Plug Connector - Stainless Steel - With NPT-Thread - Positionable
screw-in angle connection - hose to thread - male thread - KQ2l
screw-in angle pivoting with hexagon socket - hose to thread - KQ2VS
extended screw-in angle connection - hose to thread - male thread - type KQ2W
screw-in angle pivoting with male thread - hose to thread - KQ2V
45°-screw-in angle connection - hose to thread - male thread - KQ2k
screw-in angle pivoting with female thread - hose to thread - KQ2VF
Dual screw-in angle connection - hose to thread - male thread - type KQ2D
Dual screw-in angle connection - hose to thread - male thread - KQ2LU
Dual screw-in angle connection - hose to thread - male thread - type KQ2Z
twice-screw-in angle with male thread - hose to thread - KQ2VD
Dual screw-in angle connection - hose to thread - male- and female thread - KQ2ZF
fuor-screw-in angle with male thread - hose to thread - type KQ2ZD
six-screw-in angle with male thread - hose to thread - KQ2ZT
Push-In Connector 45°
Push-In Connectors - 45° - With Cylindrical Thread
Elbow Pivoting Connection - Stainless Steel - With Hollow Screw
Elbow Plug Connections - Stainless Steel - With Conical Thread
Elbow Plug Connections - Stainless Steel - With NPT-Thread - Positionable
Angle-Bulkhead Connectors
Mini-Angle-Bulkhead Connector
Mini-Elbow-Connector 45°
Angle Push-In Fitting With Thread - Plastic
L-Rotary Union - With One Ball Bearing - Up To 500 Rpm
L-Swivel Joints - With Two Ball Bearings - Up To 1500 Rpm
L-Rotary Unions - With Cylindrical Thread And One Ball Bearing - Up To 500 Rpm
L-Swivel Joint - With Cylindrical Thread and Two Ball Bearings - up to 1500 Rpm
Throttle Ball Valves - Stainless Steel - Angle Type - Exhaust Air Regulation With Knurled Head Screw - M 5 bis R 1/2"
Male Run T-Connector - With Cylindrical Male Thread
Angle Screw-In Plug Connection
L-Stem Connector - Reduced
L-Stem Connector - Long 45°
L-Stem Connector Long
Mini-L-Stem Connectors
Mini-Equal Elbow Connector
angle plug connection for hose to hose - for equal diameter - model KQ2L
angle plug connection for hose to coupling - equal diameter - model KQ2L
angle plug connection for hose to plug connection - reduced - model KQ2L
extended angle plug connection for hose to coupling - equal diameter - model KQ2W
bulkhead-plug-connection for equal hoses - modell KQ2LE
Elbow Connector
Angle-Connection 90° - For Inched Hoses - For Hose on Hose - 2x Same Diameter
Elbow Quick Couplers - Stainless Steel
Elbow Connector - Stainless Steel
Elbow Plug Connection
Mini-Plug Connectors With Female Thread
Plug-Connector With Female Thread
straight screw on plug connection - hose to female thread - model KQ2F
bulkhead-plug-connection with female thread - hose to thread - bulkhead fitting - model KQ2E
Bulkhead Plug-Connector With Female Thread
Straight Screw-On Plug Connection
screw in coupling for hose to thread - male thread - modell KQ2N
straight screw in connection - hose to thread - male thread - model KQ2H
straight screw in connection - hose to thread - male thread - hexagon socket - model KQ2S
plug connection "Y" with male thread - hose to thread - model KQ2U
4-way-plug-bypass with thread connection - hose to thread - model KQ2UD
Plug Connector With Female Hexagon And Round Body
Plug Connectors With Conical Therad And Round Body^
Mini-Plug Connectors With Fine Thread
Mini-Plug Connectors With Female Hexagon
Mini-Plug Connections - Male Hexagon
Stem Connectors With Male Thread - For Cylindrical Threads
Stem Connectors - For Conical Threads
Stem Connector With Male Thread - For NPT-Threads (Imperial)
Stem Connector With Male Thread - For NPT-Threads (Metrical)
Push-In Fittings- Straight - Self Locking
Threaded Connectors for Pus-In Fittings
Push-In Fitting - Straight - With Cylindrical Thread - Self Locking
Swivel Joint - With One Ball Bearing - bis 500 Rpm
Quick Coupler - Stainless Steel - With Female and Male Hexagon
Quick Coupler - Stainless Steel - With Femnale and Male Hexagon And Cylindrical Thread
Rotary Unions - With Cylindrical - Up To 500 Rpm
Plug Connectors - Cylindric Thread
Plug Connections - Stainleess Steel - Straight With NPT-Thread
Plug Connectors - Stainless Steel - Straight With Cylindrical Thread
Plug Connections - Stainleess Steel - Straight With Conical-Thread
Bulkhead Quick Couopler, - Stainless Steel
Swivel Joints - With Two Ball Bearings - Up To 1500 Rpm
Swivel Joints - With Two Ball Bearings - Up To 1500 Rpm
Swivel Joint - With Cylindrical Thread and Two Ball Bearings - Up To 1500 Rpm
Straight Screw-In Plug Connection
coupling KQ2N - 2 plug-in connection with the same diameter
coupling with reduction KQ2R - 2 plug-in connection
straight plug connection - hose to hose - for equal diameter - model KQ2H
coupling with reduction KQ2N - 2 plug-in connection
straight plug connection - hose to hose - reduced - model KQ2H
Mini-Push-In Connector - Reducing Connector
Tube Reducer Connector
Tube Reducer Connectors
Reducing Connectors
straight screw in connection - hose to hose - bulkhead fitting - model KQ2E
Bulkhead Connector - Nickel-Plated Brass
Mini-Bulkhead Connectors
Air Coupler - Straight - Self Locking
2/2 ways hand lock valve with plug connector - modell VHK - tube to tube
Air Couplers - With Bulkhead Thread - Self Locking
Plug And Socket Connections - Stainless Steel - For Combination
Quick Coupler - Stainless Steel - With NPT-Thread - For Combination
Quick Couplers - Stainless Steel - Straight
Plug Connectors - Stainless Steel - Reducing With Plug Nipple
Plug Connectors - Stainless Steel - Straight
Reducing Stem Connector - Stainless Steel
Bulkhead Plug Connection - Stainless Steel - Straight
Plug Connector - Female And Male Hexagon
Straight Plug Connection
Plug Connections
Replacement Sealing*
Hydraulic Quick Coupling With Female Thread
Hydraulic Quick Release Coupler With Female Thread
Hydraulic Quick Release Connector With Female Thread
POM Quick Locking Connector
Hydraulic-Coupling With Female Thread
Flat-Face Hydraulic Couplings With Female Thread
POM Locked Quick Release Coupling
Hydraulic Quick Release Connector With Female Thread
Plug for quick couplings series HKT
Flat-Face Hydraulic Couplings With Female Thread
Flat-Face Couplings With Female Thread They Can Be Coupled Under Pressure
Hydraulic Quick Coupling With Female Thread
Quick Coupling - Series HKT
Flat-Face Couplings With Female Thread Under Pressure Coupling
Stainless Steel Flat-face Hydraulic Couplings With Female Thread
Flat-Face Hydraulic Couplings With Female Thread - Stainless Steel
Hydraulic Quick Couplings
Quick Couplers DN 5 - POM/PVDF With Female Thread
Quick Release Coupler DN 5 - POM/PVDF With Female Thread - Open And Locked
Quick Release Couplings DN 5 - POM/PVDF With Male Thread
Quick Release Couplers DN 5 - POM/PVDF With Hose Connector
Quick Release Couplings DN 5 - POM/PVDF With Hose Connector
Quick Release Couplers DN 5 POM/PVDF With Hose Conenctor And Bulkhead Thread
Quick Couplers DN 5 - POM/PVDF With Hose Connector And Bulkhead Thread
Breakaway Coupling DN 5 - POM/PVDF With Hose Connector
Breakaway Couplings DN 5 - POM/PVDF With Hose Connector
Quick Couplings DN 5 - POM/PVDF With Male Thread - Open And Locked
Quick Coupler DN 5 POM/PVDF With Hose Connector - Open And Closed
Quick Coupler DN 5 POM/PVDF With Hose Connector - Open And Closed
Quick Coupler DN 5 - PVDF With Bulkhead Thread - Open And Closed
Push-In Quick Coupler DN 5 - PVDF With Bulkhead Thread - Open and Closed
Quick Release Coupling DN 7,2 - POM/PVDF With Male Thread
POM/PVDF Quick Release Couplings DN 7,2 With Female Thread
POM/PVDF Quick Release Couplings DN 7,2 With Hose Connector
POM/PVDF Quick Release Couplings DN 7,2 With Male Thread - Standard Open
POM/PVDF Quick Release Couplings DN 7,2 With Female Thread - Standard Open
POM/PVDF Quick Release Couplings DN 7,2 With Hose Connector - Standard Open
POM/PVDF Quick Release Couplings DN 7,2 With Hose Connector - Lockable
POM/PVDF Quick Release Couplings DN 7,2 With Female Thread - Lockable
POM/PVDF Quick Release Couplings DN 7,2 With Male Thread - Lockable
Plastic Quick Couplings
High Temperature Quick Plug Connector DN 9 With Hose Nozzle - Straight
High Temperature Quick Connectors DN9 With Hose Nipples - Straight
High Temperature Quick Couplings DN9 With Hose Nipple - 45°
Hgh Temperature Quick Connectors DN9 With Hose Nipples - 90°
High Temperature Quick Couplers DN9 With Male Thread - Straight
High Temperature Quick Couplers DN9 With Male Thread - 45°
High Temperature Quick Coupler DN9 With Male Thread - 90°
High Temperatre Coupling DN9
High Temperature Quick Plug Connector DN9 With Male Thread - Straight
High Temperature Quick Coupling Plug DN9 With Tube - Straight
High Temperature Quick Coupling Plug DN9 With Male Thread - 90°
Connection Piece
High Temperature Quick Couplers DN13 With Hose Nozzle - Straight
High Temperature Quick Couplings DN13 With Male Thread - 45°
High Temperature Quick Couplings DN13 With Hose Nozzle - 90°
High Temperature Quick Couplings DN13 With Conical Male Thread - Straight
High Temperature Quick Couplings DN13 With Hose Nozzle - 45°
High Temperature Quick Coupler DN13 With Male Thread - 90°
Diverter Coupler For Heatig Bridge (Tube Connection 10 mm)
High Temperature Quick Couplers DN13
High Temperature Quick Coupler DN13 With Male Thread - 90°
High Temperature Quick Coupler Plug DN13 With Male Thread - Straight
High Temperature Quick Coupler Plug DN13 With Tube - Straight
Connectors
High Temperature Quick Couplers DN 13 With Hose Connector - Straight
High Temperature Quick Couplings
Hand bleed valve
Safety Couplings DN 7,2 - Female Thread *
Quick Safety Coupling DN 7,2 - Female Thread *
Safety Couplings DN 7,2 - Female Thread - With Manual Slide Damper
Quick Connect Safety Coupling DN 7,2 - Male Thread *
Satety Quick Couplings DN 7,2 - Male Thread
Quick Connect Safety Coupling DN 7,2 - Male Thread - With Manual Slide Damper
Safety Coupling DN 7,2 - With Hose Connection And Manual Slide Damper
Quick Connect Safety Couplings DN 7,2 With Hose Connector *
Safety Quick Couplings DN 7,2 With Hose Connector *
Safety Quick Hose Couplings DN 10
Safety Quick Couplers DN 10 - Male Thread
Safety - Quick Couplings
Quicke Coupling DN 19 - Male Thread
Quick Couplings DN 19 - Female Thread
Quick Hose Couplings DN 19
Quick Plug Coupler DN 19 - Male Thread
Quick Plug Coupler DN 19 - Female Thread
Quick Hose Coupler DN 19
Quick Couplings DN 19
Quick Couplings DN 15 - Male Thread
Quick Cuplings DN 15 - Female Thread
Quick Hose Couplings DN 15
Quick Plug Coupling DN 15 - Male Thread
Quick Plug Couplings DN 15 - Female Thread
Quick Plug Couplings DN 15 Wih Hose Connection
Quick Couplings DN 15
It will be soon available
Quick Coupler DN 10 - Male Thread
Quick Couplers DN 10 - Female Thread
Quick Release Coupling DN 10 With Hose Connection
Quick Plug Coupler DN 10 - Male Thread
Quick Plug Coupler DN 10 - Female Thread
Plug Couplings DN 10 - With Hose Connection
Quik Couplings DN 10
Standard coupling DN 7,2, brass, inner
Standard coupling DN 7,2, brass, outer
Standard coupling DN 7,2 with hose connection
Standard Quick Fitting Coupling - with kink protection - one-sided shut off
Plug for standard coupling DN 7,2, hose
Plug for standard coupling DN 7,2, inner
Plug for standard coupling DN 7,2, outer
Plug for standard coupling DN 7,2, hose a
Air Deflector - Twofold - Complete With Socket Plug And socket Couplers NW 7,2 Assembled
Air Deflector - Triple - Complete With Socket Plug and Socket Coupler NW 7,2 Assembled
Push-To Quick Coupler DN 7,2 With Hose Connector - Bolt Interlock
Quick Couplings DN 7,2 With Cap Nut - Bolt Interlock
Quick Connectors DN 7,2With Hose Nozzle - Ball Interlock
Quick Connectors DN 7,2 With Hose Nozzle - Ball Interlock & Plastic Bushing
Quick Coupler DN 7,2 With Hose Nozzle - Aluminium
Quick Couplers DN 7,2 - Male - Bolt Locking
Quick Couplers DN 5 - With Cap Nut And Anti-Kink
Quick Coupler DN 7,2 - Male Thread - Ball Locking
Quick Coupler DN 7,2 - Male Thread - Ball Interlocking & Plastic Bushing
Quick Couplers DN 7,2 - Female Thread - Ball Interlock
Quick Coupler DN 7,2 - Female Thread - Aluminium
Quick Couplings DN 7,2 - Female Thread - Ball Interlock & Plastic Bushing
Pivotable Hose Coupling Socket DN 7,2 - Female Thread
Pivotable Coupling Socket DN 7,2 - Male Thread
Pivotable Hose Coupler DN 7,2 - Hose Connector
Push-To Connector With Backflow Choking DN 7,2 - Female Thread
Push-To Connector DN 7,2 - Male Thread
Ball Valve Quick Connector DN 7,2 With Cap Nut
Ball Valve Push-To Couplers DN 7,2 With Hose Connector
Ball Valve Quick Coupler DN 7,2 With Cap Nut And Anti-Kink
Quick Push-In Connector DN 7,2 With Cap Nut
Quick Coupler DN 7,2 - Male Thread
Push-To Connector DN 7,2 - Female Thread
Push-In Connectors DN 7,2 With Cap Nut And Anti-Kink
Push-To Connector DN 7,2 With Hose Barb
Plug DN 7,2 With Cap Nut And Anti-Kink, Pivotable
Safety Push-To Connector With Backflow Choking DN 7,2 With Hose Connector
Quick Couplers With Backflow Choke DN 7,2 - Female Thread
Wall Socket - Complete With Socket Coupler NW 7,2 Assembled
Brass Plug Nippel DN 7,2 - with Break protection spring
Distributor
Swivel-Joint Push-To Connector DN 7,2 - Male Thread
Quick Couplings DN 7.2
mini-coupling DN 5, outer
mini-coupling DN 5, inner
mini-coupling DN 5, hose
mini-coupling DN 5, hose a
mini-coupling DN 5, inner a
mini-coupling plug DN 5, outer
mini-coupling plug DN 5, inner
Quick Couplers DN 5 - Female
Quick Couplers DN 5 - Male
Quick Couplers DN 5 - With Bulkhead Thread And Cap Nut
Quick Couplers DN 5 - With Cap Nut
Quick Coupler DN 5 With Bulkhead Thread And Hose Nozzle
Breakaway Coupling DN 5 With Bulkhead Thread And Cap Nut
Breakaway Coupling DN 5 With Bulkhead And Hose Nozzle
Push-In Connector DN 5 - Female
Push-In Connector DN 5 - Male
Push-In Coupler With Cap Nut And Antikink
Quick Coupler DN 5 With Bulkhead And Cap Nut
Quick Coupler Dn 5 With Cap Nut
Quick Coupler DN 5 With Bulkhead Thread And Hose Nozzle
Hose Connector DN 5
Quick Couplings DN 5
Quick Couplings DN 2,7 - Male Thread
Quick Couplers 1/8 Dn 2,7 - Female Thread
Quick Coupler DN 2,7 With Connections
Quick Couplers DN 2,7 With Bulkhead Thread And Hose Connection
Quick Couplers DN 2,7 With Cap Nut
Quick Couplers DN 2,7 With Bulkhead Thread And Cap Nut
Mini Plug Couplers DN 2,7 - Male Thread
Mini Plug Coupler DN 2,7 - Female Thread
Mini Plug Coupling DN 2,7 With Hose Connection
Mini Plug Coupler DN 2,7 With Bulkhead Thread And Hose Connection
Mini Plug Coupler DN 2,7 With Cap Nut
Mini Plug Coupler DN 2,7 With Bulkhead Thread And Cap Nut
Multi-Coupling Connectors - Plugs
Multi-Coupling Connectors - Muffle
Quick Couplings DN 2,7
Quick Couplings
Hose Couplings
Industrial Hoses
PA - spiral hose - soft - blue
Polyurethane Spiral Hoses With Antikink Protection and Pivotable Thread Connection
Polyamide Spiral Hose With Quick Coupling NW 7 - Spatter Protected
PA Spiral Hoses
PU hose - control line - nature
PU hose - control line - blue
PU hose - control line - yellow
PU hose - control line - green
PU hose - control line - red
PU hose - control line - black
PU Hoses
PA - hose - soft - nature
PA - hose - hard - nature
PA - hose - soft - black
PA - hose - hard - black
PA - hose - soft - blue
PA - hose - hard - blue
PA - hose - soft - red
PA - hose - hard - red
PA - hose - soft - green
PA - hose - hard - green
PA - twin hose - blue/blue
PA - twin hose - nature/blue
PA - twin hose - nature/nature
Tubes of polypropylene copolymere
PA - Elastoflex hose - nature
PA - Elastoflex hose - blue
PA - Elastoflex hose - red
PA - Elastoflex hose - green
PA - Elastoflex hose - black
High Pressure Polyamide Hose - Up To 136 bar
PA Hoses
LD-PE hose - control line - soft - nature
LD-PE hose - control line - soft - blue
LD-PE hose - control line - soft - yellow
LD-PE hose - control line - soft - green
LD-PE hose - control line - soft - red
LD-PE hose - control line - soft - black
HD-PE hose - control line - hard - nature
Bundle spirals PE
Drinking water tube - reinforced
PE Hoses
Plastic Hoses
SMC pressure air cylinder ISO 6432 - norm cylinder one way action - spring force for bring in - type C85N-S - elastic extreme position
SMC pneumatic cylinder ISO 6432 - norm cylinder one way action - springe force for bring out - type C85N-T - elastic extreme position
SMC pressure air cylinder ISO 6432 - class C85N - double action - elastic extreme position
SMC pneumatic cylinder ISO 6432 - class C85WE - with troughout piston bar - double action - elastic extreme position
Pneumatic Cylinders - Clean-Profile - Series Standard ISO 6432 - Kolbendurchmesser 32mm To 125mm
Single Acting Small Cylinder ISO 6432 / CETOP RP 52 P
Double Acting ISO 6432 / CETOP RP 52 P Cylinder
Short Cylinder Stainless Steel ISO 6432 / CETOP RP 52 P
Stainless Steel Pneumatic Cylinder ISO 15552, Ø 32 To 125
Round And Stainless Steel Cylinders ISO 6431 Ø 32 To 125 mm
Single Acting Screw-In Cylinders
Round Cylinders Standard, Piston Ø 32 To 63 mm
Compressed Air Round Cylinder - Normal Cylinder Double Acting - Series DSWP - Elastic End of Sroke Dampening
Standard - Air Cylinder Ø8mm To Ø 25mm
Air Cylinders
Combi Air Service Unit - Size 1 - G 1/4" To G 1/2" - 1400 l/min
Combi-Air Service Units - Size 2 - G 1/2" To G 1" - 3400 l/min
Tank With Inner and Outer Tank For Condensate And Oil - Manual Discharge
Tank With Inner and Outer Tank For Condensate And Oil - Mount On Automat (1- 12 bar)
Tank With Inner and Outer Tank For Condensate And Oil - Mount On (4 - 16 bar)
Tank With Inner and Outer Tank For Condensate And Oil - Semi-Automatic (0,5-25/16 bar)
Filter Inlet For Combi Air Service Units
Basket Guard For Combi-Air Service Units
Dropper For Combi Air Service Units
Mounting Angle For Combi Air Service Units
Condensate Releaser With Munual Safety Stop For Combination Maintenance Units
Combination Compressed-Air Service Units
Filter controller 5µm + drop-oiler - for pipe constructions - with squared pressure gauge / 8.5 bar - manual condensate discharge
Filter controller 5 µm + drop-oiler - for pipe constructions - modular concept / 8.5 bar - automatic condensate discharge
Filter combination - fine filter 5 µm + micro filter 0.3 µm - for wall fastening with bracket manometer / 8.5 bar - manual condensate-discharge
Filter combination - fine filter 5 µm + micro filter 0.3 µm - with bracket manometer for pipe constructions / 8.5 bar - manual condensate discharge
Filter combination - fine filter 5 µm + drop-oiler - for wall mountings - with squared manomter / 8.5 bar - manual condensate discharge
Filter combination - fine filter 5 µm + drop-oiler - for wall mountings - with squared manometer / 8.5 bar - automatic condensate discharge
Filter combination - fine filter 5 µm + micro filter 0.3 µm - with bracket manometer for pipe constructions / 8.5 bar - automatic condensate-discharge
Filter combination - filter 5µm + regulator + oiler - for pipe constructions - with squared pressure gauge / 8.5 bar - manual condensate discharge
Filter combination - filter 5µm + regulator + oiler - for pipe constructions - with squared pressure gauge / 8.5 bar - automatic condensate discharge
Modular maintenance unit - filter 5µm + regulator + oiler - for wall mountings - with squared pressure gauge / 8.5 bar - manual condensate discharge
Modular maintenance unit - filter 5µm + regulator + oiler - for wall mountings - with squared pressure gauge / 8.5 bar - automatic condensate discharge
SMC Compressed-Air Service Units
Manual Ball Valve With Deaeration - Construction Type Futura - Lockable
Compressed Air Service Units Threepart Futura - 16 bar - Filter 5 µm + Regulator + Oiler - With Pressure Gauge - Manual Discharge
Compressed Air Service Units Twopart - 16 bar - Filter Regulator 5 µm + Oiler - With Pressure Gauge - Manual Discharge
Compressed-Air Service Units - Type Futura -
Multifix Ball Valve For Maintenance Units With Drain Out - 3/2-Way - Construction Type 0 To 2 - G 1/8" To G 3/4"
Compressed Air Maintenance Unit Eco Line - Filter Regulator 5µm + Oiler - 10bar - Manual Condensate Discharge
Air Service Unit 2-Piece - Mini - G 1/8" To G 1/4" - 350 l/min
Compressed Air Service Units - 2-Pieces - Standard - G 1/4" To G 1" - To 4000 l/min
Air Service Units 2-Piece - Multifix - Series 0 - G 1/8" To G 1/4" - 600 l/min
Air Service Unit 2-Piece - Multifix - Series 1 - G 1/4" To G 3/8" - 1100 l/min
Air Service Units 2-Piece - Multifix - Series 2 - G 1/2" To G 3/4" - 3500 l/min
Air Service Unit 2-Piece - Multifix - Series 5 - G 3/4" To G 1" - 10500 l/min
Air Service Units - 3-Piece - Standard - G 1/4" To G 2" - To 18500 l/min
Air Service Unit 3-Piece - Multifix - Series 0 - G 1/8" To G 1/4" - 700 l/min
Air Service Unit 3-Partite - Multifix - Series 1 - G 1/4" To G 3/8" - 1100 l/min
Air Service Unit 3-Partite - Multifix - Series 2 - G 1/2" Up To G 3/4" - 3000 l/min
Air Service Unit 3-Partite - Multifix - Series 5 - G 3/4" To G 1" - 11300 l/min
Mounting Angle For Ari Service Units - M 30 x 1,5
Mounting Angle For Air Service Units - M 20x1,5
Coupling Package For Eco Line Compressed Air Service Units
Compressed-Air Service Units - Standard -
Compressed-Air Service Units
O-Rings For Tanks Of Construction Type Futura
Locking Screws For Oil Refillings Multifix / Standard
Dropper As Spare Part For Oilers - Multifix
Dropper As Spare Parts For Oilers - Standard And Mini - Polyamide
Dropper As Spare Parts For Oilers - Standard And Mini - Metal / Glass
Oil Tank For Lubricators - Standard - Plastic
Replacement Tanks For Lubricators - Standard - Metal
Repleacement Tanks For Oilers - Multifix - Plastic
Replacement Tank For Oilers - Multifix - Metal
Replacement Tank For Oilers - Multifix - Metal With Viewing Tube
Special Oil For Pneumatic Oiler - Hall Areas / Summer
Special Oil For Pneumatic Oilers - Outer Areas / Winter
Special Oil For Pneumatic Oiler - Edibles
Mounting Materials For Compressed Air Service Units Type Futura
Coupling Package For Maintence Units Type Futura
Replacement Tank For Oilers of Construction Type Futura
Drop Cap For Oilers Of Futura Type
Accessories Air Lubricators
Compressed-air - drop-oiler - model AL / type: standard (lockable)
blast - drop-oiler - model AL - type: standard (lockable / metal material-box
Filter controller 5µm + drop-oiler - for pipe constructions - with squared pressure gauge / 8.5 bar - manual condensate discharge
Filter combination - fine filter 5 µm + drop-oiler - for wall mountings - with squared manomter / 8.5 bar - manual condensate discharge
Filter combination - fine filter 5 µm + drop-oiler - for wall mountings - with squared manometer / 8.5 bar - automatic condensate discharge
Filter controller 5 µm + drop-oiler - for pipe constructions - modular concept / 8.5 bar - automatic condensate discharge
blast - drop-oiler - model AL - type: standard (lockable) / 1 liter metal material-box
SMC Condensate Releaser
Compressed Air Lubricator Type Futura - 16 bar - 8000 l/min
Condensate Releaser - Type Futura
Lubricator - Mini - G 1/8" To G 1/4" - 600 l/min
Micro-Mist Lubricants - G 1/4" To G 1/2" - Construction Type 1 - 1500 l/min
Micro-Mist Oilers - G 1/8" To G 1/4" - Consruction Type 0 - 1000 l/min
Compressed Air Lubricators - 10 bar
Lubricator - Stainless Steel - G 1/4" to G 1" - Max. 30 bar - Up To 8000 l/min
Exchange Tank for Eco Line Air Oilers
Mist Oiler - Standard Size 1 To 8 - G 1/4" To G 2" - To 11000 l/min
Mist Oilers - Multifix - Series 1 - G 1/4" To G 3/8" - 1900 l/min
Mist Oiler - Multifix - Series 2 - G 1/2" To G 3/4" - 5000 l/min
Mist Oilers - Multifix - Series 5 - G 3/4" to G 1" - 18000 l/min
Condensate Releaser - Standard -
Condensate Releaser
O-Rings For Tanks Of Construction Type Futura
Replacement Compressed Air Filter 5 µm - For Eco Line Filter and Filter Regulator
Replacement Filters For High Pressure Compressed Air Filters
Fastening Angle For Filters And Oilers Standard Construction Type 1 To 3
Polycarbonate Replacement Tank - For Compressed Air Filters Eco Line
Replacement Tanks For Filters And Filter Regulators - Standard - Plastic - Semi-Automatic
Replacement Tanks For Filters And Filter Regulators - Standard - Plastic - Automatic
Replacement Tanks For Filters And Filter Regulators - Standard - Metal - Semi-Automatic
Replacement Tanks For Filters And Filter Regulators - Standard - Metal - Automatic
Replacement Filter For Filter And Filter Regulator - Multifix
Mounting Materials For Compressed Air Service Units Type Futura
Coupling Package For Maintence Units Type Futura
Replacement Tank For Compressed Air Filters Type Futura
Interchangeable Filter Element 0,01 µm - For Fine Filters Multifix
Filter Accessories
Preliminray Filter Element - Polyethylene
Replacement Filter Element For Micro Filter MF
Replacement Element For Micro Filter SMF
Replacement Elements For Activated Carbon Filters
Replacement Elements For Safety Color Change Filters
Wall Holder
Interchangeable Elements
It will be soon available
Activated Carbon Filter - Technical 100% Oilfree Air
Activated Carbon Filter "ultra.pure AK" - For 20 To 38400 m³/h Flor Rate
Activated Carbon Filters
Sub Micro Filter SMF - < 0,01 mg/m³
Sub Micro Filter "Ultra.Pure SMF" - Including Energy Monitor And Drain
Sub Micro Filter "Ultra.Pure SMF Ultra.Plus" - Including Energy Monitor And Ultra.Drain
Sub Micro Filter - 0,01 µm
Micro Filter MF - 0,03 mg/m³
Micro Filter "ultra.pure MF ultra.plus" - Including Energy Monitor And Ultra.Drain
Microfilter "ultra.pure MF" - Inkl. Energymonitor And Conductor
Micro Filter - 0,03 µm
Filter Inlets - Fine Filter For Drink And Washwater
Color Change Filters
Smooth Filter "Ultra.Pure FF Ultra.Plus" - Incl. Energy Monitor And Ultra.D^rain
Fine Filters - 0,1 µm
Preliminary Filters "ultra.pure PE" - Including Energy Monitor And Divertor
Preliminray Filter - Polyethylene
Prliminary Filters "ultra.pure PE ultra.plus" - Incl. Energy Monitoring And Ultra.Drain
Fine Filter "ultra.pure FF" - Including Energy Monitor And Conductor
Preliminary Filters "ultra.pure SB ultra.plus" - Incl. Energy Monitoring And Ultra.Drain
Preliminary Filters - 25 µm
Cyclone Condensate Separator
Cyclone Sparator "ultra.cyclon plus" - Level Controlled Separator - From 125 m³/h To 15000 m³/h
Cyclone Separator
Industry Air Filters
Filter - 5 µm - modular concept / 10 bar - manual condensate-discharge
Filter - 5 µm - modular concept / 10 bar - automatic condensate-discharge
Mico-Filter - 0,3 µm - modular concept / 10 bar - manual condensate-discharge
Filter combination - fine filter 5 µm + micro filter 0.3 µm - with bracket manometer for pipe constructions / 8.5 bar - manual condensate discharge
Mico-Filter - 0,3 µm - modular concept / 10 bar - automatic condensate-discharge
Submicro-Filter - 0,01 µm - modular concept / 10 bar - manual condensate-discharge
Submicro-Filter - 0,01 µm - modular concept / 10 bar - automatic condensate-discharge
Filter combination - fine filter 5 µm + micro filter 0.3 µm - for pipe constructions - modular concept / 10 bar - hand drain
Filter combination - fine filter 5 µm + microfilter 0.3 µm - for pipe constructions - modular concept/10 bar - automatic drain
Filter combination - 5 µm - wall mounting - modular concept / 10 bar - hand drain
Filter combination for wall mountings - fine filter 5 µm + micro filter 0.3 µm - modular concept / 10 bar - automatic drain
Standard-Filter controller 5 µm - 8,5 bar - with integrated manometer - manual condensat discharge - lockable
Standard-filter controller 5 µm - 8,5 bar - with integrated pressure gauge - automatic condensate discharge - lockable
Micro filter controller 0,3 µm - 8,5 bar - with integrated manometer - automatic condensate discharge - lockable
Sub micro filter controller 0,01 µm - 8,5 bar - with integrated manometer - manual condensate discharge - lockable
Sub micro filter controller 0,01 µm - 8,5 bar - with integrated manometer - automatic condensate discharge - lockable
Filter combination - fine filter 5 µm + micro filter 0.3 µm - with bracket manometer for pipe constructions / 8.5 bar - automatic condensate-discharge
Filter combination - fine filter 5 µm + micro filter 0.3 µm - for wall fastening with bracket manometer / 8.5 bar - manual condensate-discharge
SMC Air Filters
Compressed Air Filters Futura - 5 µm - 16 bar - 3500 l/min - With Manual Discharge
Compressed Air Activated Carbon Filter Type Futura - 16 bar
Compressed Air Sumiko Filters Type Futura - 0.01 µm - 16 bar - Manual Discharge
Compressed Air Sumiko Filter Futura - 0.01 µm - 16 bar - Manual Discharge
Air Filter - Type Futura
Mini-Filter Regulators for Air And Water - G 1/4" - 350 l/min
Compressed Air Filters Eco Line - 5my - 10 bar - Manual Condensate Discharge
Filter - Size 1 Standard - G 1/4" To G 3/8" - 800 l/min
Filter - Size 2 Standard - G 3/8" To G 1/2" - 3100 l/min
Filter - Size 3 Standard - G 1/2" To G 1" - 4000 l/min
Filter - Standard Size 5 - G 3/4" To G 1 1/2" - 12500 l/min
Filter - G 1 1/4" To G 2" - 30800 l/min
Filter - Standard Size 9 - 40000 l/min
Compressed Air Filters For High Pressures - G 3/8" To G 2" - To 15830 l/min - To 40 bar
Filter - Multifix - Construction Type 0 - G 1/8" To G 1/4" - 1000 l/min
Filter - Multifix - Construction Type 1 - G 1/4" to G 3/8" - 2100 l/min
Filter - Multifix - Construction Type 2 - G 1/2" to G 3/4" - 4000 l/min
Filters - Multifix - Series 5 - G 3/4" To G 1" - 8000 l/min
Activated Carbon Filters - Multifix - Series 0 To 5 - G 1/8" To G 1"
Preliminary Filters - Multifix - Series 0 To 5 - G 1/8" To G 1"
Fine Filter - Multifix - Model 0 To 5 - G 1/8" To G 1"
Filter Regulator - Stainless Steel - G 1/4" to G 1" - Up To 6000 l/min
Filter - Stainless Steel - G 1/4" To G1" - Max. 50 bar - Up To 7200 l/min
Compressed Air Filters - Standard -
Filters and Silencers
Holding Angle For Pressure Regulators
Mounting Angle For Multifix-Components - For Series 1
Mounting Angle For Multifix-Components - For Series 2
Couling Package To Connect Single Componenets - Multifix - For Series 0
Coupler Packages To Connect Single Components - Multifix - For Series 1 And 2 - Type Wide/Slender
Coupling Package To Connect Single Components - Multifix - For Series 1, 1A, 2 - Type Slender
Coupling Package To Connect Single Components - Multifix - For Series 1 And 2 - Wide Execution
Coupling Package To Connect Single Components - Multifix - For Series 5
Coupling Package For Maintence Units Type Futura
Replacement Elements For Filter And Filter Regulators - Standard
Replacement Filter For Filter And Filter Regulator - Multifix
Replacement Compressed Air Filter 5 µm - For Eco Line Filter and Filter Regulator
Filter Holder For Filters And Filter Reglators - Multifix
Replacement Diaphragm For Pressure Regulators - Mini
Replacement Diaphragm For High Pressure Regulators
Replacement Diaphragm For Filter Regulators - Standard
Diaphragm For Pressure And Filter Regulators - Multifix
Replacement Diaphragm For Filter Regulators - Mini
Replacement Diaphragm For Remote Controlled Pressure Regulators - Standard
Replacement Diaphragm For High Pressure Regulators - Standard
Conical Nipple For High Pressure Regulators
Spring Hood For Pressure Regultors And Filter Regulators - Multifix - Standard
Spring Cover For Pressure Regulator And Filter Regulator - Multifix - Lockable
Manual Wheel For Spring Hoods - Multifix
Basket Guards For Filters, Filter Regulators and Oilers - Standard
Basket Guards For Plastic Tank - Multifix
Condensate Drainer As Spare Part For Filters And Filter Regulators - Multifix - With Manuall Relief Valve (Manual Actuated)
Steam Trap As Spare Part For Filters and Filter Regulators - Standard - With Manual Relief Valve (Manually Actuated - For Plastic Tanks
Condensate Drainer As Replacement For Filters And Filter Regulators - Standard - With Manual Relief Valve (Manually Driven)
Condensate Drainer As Spare Part For Filters And Filters Regulators - With Automatic Relief Valve (Swimer Actuated)
Plastic Cup With Automatic Relief For Filters And Filter Regultors Multifix
Replacement Container For Filter And Filter Regulators - Multifix - Plastic With Manual Release
Replacement Cup For Filters And Filter Regulators - Multifix - Metal With Semi-Automatic Or Automatic Relief
Replacement Tank For Filters And Filter Regulators - Multifix - Metal With Viewing Tube
Replacement Tank For Filters And Filter Regulators - Multifix - Metal With Viewing Tube And Automatic Relief
T-Distributor - 0 To 16 bar - G 1/4" To G 3/4"
Intermediary With Fastening Element For Modular Maintenace Unit
Intermediary For Modular Maintenance Units
Fastening Angle for Multifix-Components
Replacement Tank For Compressed Air Filters Type Futura
Filter Holder and Swirl Flap For Maintenance Units
Filter Element For Compressed Air Filters Type Futura
Alternate Diaphragm For Pressure Regulators Of Construction Type Futura
O-Rings For Tanks Of Construction Type Futura
Mounting Materials For Compressed Air Service Units Type Futura
Pressure Regulator Accessories
Choke Ball Valve - Adjustable Exhaust Air - With Slotted Screw And Counter Nut - Female Thread - Nickel-Plated Brass Banjo Union - G 1/8" To G 1/4"
Choke Ball Valve - Adjustable Supply Air - With Knurled Screw And Counter Nut - Female Thread - Nickel-Plated Banjo Union - M5 To G 1/4"
Choke Ball Valve - Adjustable Exhaust Air - With Knurled Screw And Counter Nut - Female Thread - Nickel-Plated Banjo Union - M 5 To G 1/4"
Choke Ball Valves - Adjustable Air Supply - With Slotted Screw And Counter Nut - Female Thread - Nickel-Plated Brass Banjo Union - G 1/8" To G 1/4"
Choke Ball Valve With Fine Regulation DRVEE - Aluminium
Choke Ball Valves DRVE - Aluminium
Throttle Check Valves - Adjustable Air Supply - With Slotted Screw And Counter Nut - CK-Fitting - Nickel-Plated Brass Banjo Union - M3 To G 1/2"
Choke Ball Valve - Adjustable Exhaust Air - With Slotted Screw - Female Thread - G 1/8" To G 1/2"
Choke Ball Valves DRVEM - With Brass Spindle - Aluminium/Brass
Unlockable Ball Valves - Stop Unions
Throttle check valve - Brass nickel-plated - to 10 bar
Unlockable Stroke Valves - Stop Unions
Choke Ball Valves DRES - Stainless Steel
Choke Ball Valves
Choke Valve - Air Supply And Exhaust Air - With Slotted Screw - Female Thread - Nickel-Plated Banjo Union - M5 To G 1/4"
Choke Valves DVA - Aluminium
Choke Valve With Fine Regulation - Aluminium
Choke Valves
Butterfly Valves
Pressure Regulators For Pipeline Constructions - Directly Controlled - Nominal Flow Rate 30 l/min
Pressure Regulator For Pipeline Constructions - Directly Controlled - Nominal Flow Rate 80 l/min
Pressure Regulators For Pipeline Constructions - Directly Controlled - Nominal Flow Rate 150 l/min
Pressure Limiter For Pipeline Constructions - REXROTH - Up To 250 l/min
Pressure Control Valves - Max. 300 l/min - With Pressure Gauge Ø 40 mm
Pressure Control Valves - 2000 l/min - With Pressure Gauge Ø 50 mm
Pressure Limiter Regulators
Flange Pressure Reducer ECO-Line - 200 bar - DIN 8546/EN 585
Compact Flange Pressure Reducers - 200 bar - DIN 8546 / EN 585
Bottle Pressure Reducers
Pressure Regulator For High Pressures - Max 40 bar
Pressure Regulator - Max. Inlet Pressure 25 bar - Regulation Range 1,5 To 8 bar
Pressure Regulators - Max. Inlet Pressure 40 bar - Regulation Range 0,2 To 2 bar
High Pressure Regulator - Max. Inlet Pressure 40 bar - Regulation Range 1,5 To 20 bar
High Pressure Regulator - Max. Inlet Pressure 276 bar - Regulation Range 0,07 To 34 bar
High Pressure Regulator - Max. Inlet Pressure 345 bar - Regulation Range 0,7 To 172 bar
High Pressure Regulators
Precision Pressure Regulator G 1/4"
Precision Fine Pressure Regulator Max 800 l/min
High Performance Precision Pressure Regulator
Precision Fine Pressure Regulator
Holding Angle For Precision Pressure Regulator
Precision - pressure controller - 4,0 bar - without pressure gauge - manual operated
Precision - pressure controller - 4,0 bar - without pressure gauge - lockable
Precision - pressure controller - 8,5 bar - without pressure gauge - manual operated
Precision Fine Filter Regulator - 800 l/min (At Inlet Pressure 8 bar)
Precision Pressure Regulator - Construction Type 2 - Flow Rate 5000 l/min
Precision Pressure Regulator - Construction Type 1 - Flow Rate 1500 l/min
Precision Pressure Regulators
Standard - pressure controller - 8,5 bar - without pressure gauge - lockable
Standard-pressure controller - 8,5 bar - with round pressure gauge - lockable
Standard-pressure controller - 8,5 bar - with integrated, square manometer - lockable
Standard-Filter controller 5 µm - 8,5 bar - with integrated manometer - manual condensat discharge - lockable
Standard-filter controller 5 µm - 8,5 bar - with integrated pressure gauge - automatic condensate discharge - lockable
Micro filter controller 0,3 µm - 8,5 bar - with integrated manometer - automatic condensate discharge - lockable
Sub micro filter controller 0,01 µm - 8,5 bar - with integrated manometer - manual condensate discharge - lockable
Sub micro filter controller 0,01 µm - 8,5 bar - with integrated manometer - automatic condensate discharge - lockable
SMC Pressure Regulators
Pressure Regulators Type FUTURA - 16 bar - 2700 l/min
Filter Regulator Type Futura 16 bar - 2600 l/min - Manual Discharge
Filter Pressure Regulators Type Futura - 5 µm - 16 bar - 5200 l/min - Manual Discharge
Double Pressure Regulator FUTURA - 16 bar - 2700 l/min
Pressure Regulator Futura Standard - Model 2 - G 3/8" And G 1/2" - Up To 5200 l/min
Pressure Regulator Futura With Continuous Pressure Suppliance - Series 1 - G 3/8" And G 1/2" - Up To 5200 l/min
Precision Pressure Regulator Futura With Continuous Pressure Supply - Series 1 - G 1/4" And G 3/8" - Up To 2700 l/min
Precision Pressure Regulator Futura - Model 1 - G 1/4" And G 3/8" - Up To 2700 l/min
Precision Regulator Futura - Series 2 - G 3/8" And G 1/2" - Up To 5200 l/min
Precision Pressure Regulator Futura With Continuous Pressure Supply - Model 2 - G 3/8" And G 1/2" - Up To 5200 l/min
Pressure Regulators - Type Futura
Pressure Regulator For Bothsided Pressure Inlet - Multifix - Sequence Assembly Possible - Construction Type 0 To Baureihe 2 - G 1/4" To G 1/2" - To 4000 l/min
Pressure Regulator - Multifix - Construction Type 0 - G 1/8" To G 1/4" - Dependent on the Preliminary Pressure - 600 l/min
Compressed Air Pressure Regulators - Eco Line - Execution Size 2 to 4 - G 1/4" to G 1/2" - 9 bar - 2500 to 7500 l/min
Pressure Regulator - Multifix - Construction Type 1A - G 3/8" - 3200 l/min
Pressure Regulators - Multifix - Construction Type 1 - G 1/4" To G 3/8" - 1600 l/min
Mini-Pressure Regulator For Water and Air - Brass - G 1/8" and G 1/4" - 16 bar - 340 l/min
Micro-Pressure Regulators For Air And Water - Galvanized Brass - Max. 10 bar - 75 l/min
Compressed Air Filter Regulator - Eco Line - Execution Size 2 to 4 - G 1/4" to G 1/2" - 9bar - 2000 to 6000 l/min - Semi-Automatic Condensate Discharge
Filter Regulator - Multifix - Construction Type 1 - G 1/4" To G 3/8" - 1600 l/min
Standard Pressure Regulator 1/4" to 1"
Filter Regulator - Multifix - Construction Type 0 - G 1/8" To G 1/4" - 1000 l/min
Pressure Regulator (Volume Booster) - Multifix - Construction Type 1, 2 And 5 - G 1/4" To G 1" - To 12500 l/min
Filter Regultor - Mini - G 1/8" To G 1/4" - 350 l/min
Filter Regulator - Standard Size 1 to 5 - G 1/4" to G 1" - to 7000 l/min
Guage Regulators For Bothsided Pressure Inlet - Multifix - Construction Type 0 And 1 - G 1/4" - Up To 1500 l/min
Pressure Regulators - Multifix - Construction Type 2 - G 1/2" To G 3/4" - 6000 l/min
Pressure Regulators With Integrated Gauges - Constrution Type 0 - 1100 l/min
Pressure Regulating Valve For Compressed Air And Gases - Red Brass - G 1/4" To G 2" - To 60 bar
Remote Controlled Pressure Regulator
Filter Regulators - Multifix - Construction Type 1A (With Basket Guard) - G 3/8" - 3000 l/min
Pressure Regulator - Multifix - Consruction Type 5 - G 3/4" To G 1" - 12500 l/min
Filter Regulators - Multifix - Construction Type 2 - G 1/2" To G 3/4" - 3500 l/min
Pressure Regulator With Integrated Gauge - Construction Type 1 - 1600 l/min
Pressure Gauge Regulator Max 41.000 l/min
Standard Pressure Regulators G 3/4" - G1 1/2"
Pressure Regulator - Stainless Steel - G 1/4" - 20 bar - 250 l/min
Pressure Regulator For The Installation On Switchboards - 250 l/min
Filter Regulators - Multifix - Construction Type 5 - G 3/4" To G 1" - 12000 l/min
Pressure controller DN 20, G3/4" and or 1" with manometer
Pressure Regulator - Stainless Steel - G 1/4" - 30 bar - 250 l/min
Pilot Controlled Pressure Regulator - G 3/4" to G 2"
Pressure Reducer For (Compressed)Air And Gases - Flange Type - Red Brass - DN 8 To DN 50 - To 40 bar
Pressure Regulator - Stainless Steel - Reversible - G 1/2" And G 3/4" - Max. 50 bar - 1200 l/min
Pressure Regulator - Stainless Steel - Non Reversible - G 1/2" And G 3/4" - Max. 50 bar - 1200 l/min
Pressure Regulator - Stainless Steel - Reversible - G 1" - Max. 50 bar - 6500 l/min
Pressure Regulator - Stainless Steel - Non Reversible - G 1" - Max. 50 bar - 6500 l/min
Pressure Regulator - Stainless Steel - Reversible - G 1 1/2" - Max. 50 bar - 15000 l/min
Pressure Regulator - Stainless Steel - Non Reversible - G 1 1/2" - Max. 50 bar - 15000 l/min
Pressure Regulator - Stainless Steel - Non Reversible - G 2" - Max. 30 bar - 25000 l/min
Pressure Regulators - Standard
Pressure Regulators
Globe motor 1 AM-NCW-14
Planetary gear air motor VT0PD0652 - 0,105 kW
Pressure air motor 2M10R - 0,24 kW
Other Fabricates
Pressure air motor - V2-F
GAST air motors- 1 AM
GAST air motor - 1 UP
GAST air motor - 2 AM-ARV-92
GAST air motors - 2 AM
GAST air motors - 4 AM-ARV
GAST air motors - 4 AM-NRV
GAST air motors - 4 AM-FRV
GAST air motors - 6 AM
GAST air motors - 8 AM
GAST air motors - 16 AM-FRV
GAST air motors - NL 22 - oilfree
GAST Air Motor - NL 32 - Oilfree
GAST air motors - NL 42 - oilfree
GAST gear motor - planetary gear - 1 AM-NRV-39A
GAST gear motor - planetary gear - 1 UP-NRV-3A
GAST gear motor - planetary gear - 1 UP-NRV-10
GAST gear motor - planetary gear - 2 AM-NRV-89
GAST gear motor - planetary gear - 4 AM-NRV-22B
GAST gear motor - planetary gear - 4 AM-NRV-54A
GAST gear motor - planetary gear - 6 AM-NRV-7A
Gast Air Motors
Compressed air motor - oil free with planetary gear - Optionally with Atex T5 confirmation
Compressed air motor MR 110 - clockwise - oilfree - Atex T5 available
Air Motor MUD82 - 0,82 kW - Steel
Pneumatic Motor Series MU200 - 1,46 kW Steel
Air Motor MRD120 - 1,20 kW - Steel
Air Motors MDR120 - 1,20 kW - Steel
Compressed Air Motor Series MU-300 - 2,20 kW Steel
Pneumatic Motor MU400 - 2,90 kW Steel
Compressed Air motor MU600 series - 4,40 kW Steel
Air Motor MUB300 - 2,20 kW - Steel
Air Motor MUB400 - 2,90 kW - Steel
Air Motors MUB600 - 4,40 kW - Steel
Air Motors > 0,8 kW
Air Motor MR28 - 0,32 kW - Steel Or Stainless Steel
Air Motors MRD28 - 0,32 kW - Steel Or Stainless Steel
Air Motor MR12 - 0,16 kW - Steel Or Stainless Steel
Air Motor MRD12 - 0,20 kW - Steel Or Stainless Steel
Air Motors MU9 - 0,11 kW - steel or stainless steel
Air Motor MU17, Steel Or Stainless Steel
Air Motor MUD9 - 0,13 kW - Steel Or Stainless Steel
Air Motor MUD20 - 0,20 kW - Steel Or Stainless Steel
Air Motor MRD25 - 0,25 kW - Steel Or Stainless Steel
Air Motors MRD55 - 0,62 kW - Sterl Or Stainless Steel
Air Motors MUD16 - 0,16 kW - Steel Or Stainless Steel
Compressed Air Motor MRD38 - 0,39 kW Steel Or Stainless Steel
Air Motor MRD40 - 0,42 kW Steel Or Stainless Steel
Air Motor MUD40 - 0,50 kW - Steel Or Stainless Steel
Compressed Air Motor MU40 - 0,46 kW Steel Or Stainless Steel
Air Motor MR55, Steel Or Stainless Steel
Air Motor MUD23 - 0,25 kW Steel Or Stainless Steel
Air Motors MRD28x - 0,32 kW - Steel Or Stainless Steel
Air Motors MU9 - 0,11 kW - Steel Or Stainless Steel
Air Motor MUB17 - 0,17 kW - Steel
Air Motor MU17 - 0,17 kW - Steel Or Stainless
Air Motor MUB23 - 0,23 kW - Steel
Air Motors MRD55 - 0,62 kW - Steel Or Stainless Steel
Air Motor MUD40 - 0,50 kW - Steel Or Stainless Steel
Air Motor MRDW25 - 0,25 kW Stainless Steel
Air Motors MRDW38 - 0,38 kW Stainless Steel
Air Motor MRD38xx - 0,38 kW - Steel
Air Motor MRDZ28 - 0,32 kW - Steel
Air Motors MU17 - 0,17 kW - Steel
Air Motors MRDZ40 - 0,42 kW Steel
Air Motor MUB23 - 0,23 kW - Steel
Air Motor MUBZ17 - 0,17 kW - Steel
Air Motors MUB23 - 0,23 kW - Steel
Air Motors < 0,8 kW
Air Motors
Pressure tank / vacuum tank - 16 / -1 bar - 0,1 to 075 liter capacity
Pressure tank / vacuum tank - 10 / -1 bar - 5 to 12 liter capacity
Pressure tank / vacuumtank / 6 bar - 20 liter capacity
Stainless Steel Pressure Tanks
Pressure tank - 16 bar - standing construction - 50 litres capacity
Pressure tank - 16 bar - horizontal construction - 50 litres capacity
Pressure tank - 16 bar - horizontal construction - 90 litres capacity
Pressure tank - 16 bar - standing construction - 90 litres capacity
Pressure tank - 16 bar - horizontal construction - 150 to 500 litres capacity
Pressure tank - 16 bar - standing construction - 150 to 500 litres capacity
Pressure tank - 16bar - standing construction - 750 / 1000 litres capacity
Pressure tank - 16 bar - horizontal construction - 1000 litres capacity
Pressure tank - 16bar - standing construction - 1500 to 10000 litres capacity
Pressure tank - 16 bar - horizontal construction - 1500 to 10000 litres capacity
Pressure Tank 16bar
Pressure tank / vacuum tank - stationary or mobile - up to 11 bar - up to 60 litre capacity
Tank Unit in Systainer - AEROTAINER PLUS
Pressure tank / vacuum tank - up to 11 bar - 10 - 40 litre capacity
Pressure tank - 11 bar - standing construction - 50 litre capacity
Pressure tank - 11 bar - horizontal construction - 50 litre capacity
Pressure tank - 11 bar - horizontal construction - 90 litre capacity
Pressure tank - 11 bar - standing construction - 90 litre capacity
Pressure tank - 11 bar - horizontal construction - 150 to 750 litres capacity
Pressure tank - 11 bar - standing construction - 150 to 750 litres capacity
Pressure tank - 11 bar - standing construction - 1000 litres capacity
Pressure tank - 11 bar - horizontal construction - 1000 litres capacity
Pressure tank - 11 bar - standing construction - 1500 to 10000 litres capacity
Pressure tank - 11 bar - horizontal construction - 1500 to 10000 litres capacity
Pressure Tank 11bar
Compressed Air Tanks
Air-Cooled Aftercooler ANS - 0,6 m³/min....3,5 m³/min - Incl. Separator -
Air-Cooled Aftercooler ANT - 2,5 m³/min....75 m³/min
Air-Cooled Aftercooler ANP - 3,5 m³/min....36 m³/min
Water-Cooled Aftercooler WFN - 1,2 m³/min...90 m³/min - Steel
Water-Cooled Aftercooler WRN - 3 m³/min...200 m³/min - Steel
Water-cooled aftercooler WFS - 1 m³/min...90 m³/min - incl. separator - fixed tube bundles - stainless steel
Water-Cooled Aftercooler WSR - 3 m³/min...200 m³/min.
Aftercooler
Diaphragm dryer KAESER DM 0.3
Diaphraghm Dryers - SMC Serie IDGH - Dew Point -15°C
Diaphragm Dryer - SMC Series IDG - Dew Point -20°C
Diaphragm Dryer - Multifix - Series 1 - G 1/4"
Diaphragm Dryer - Multifix - Series 1 - G 1/2"
Diaphragm Dryer
Adsorbtion Dryers Ultra.Dry Compact - 7 m³/h To 620 m³/h
Small Dessicant Dryer - KAESER DC 1.5 - Heatless
Dessicant Dryer -KAESER DC 1.5 E - Heatless
Dessicant Dryer - KAESER DC 2.8 - Heatless Regeneration
Dessicant Dryer KAESER DC 2.8 E - Heatless Regenerated
Dessicant Dryer -KAESER DC 4.2 - Heatless Regenerated
Dessicant Dryer - KAESER DC 4.2 E - Hetless Regenerated
Desscicant Dryer - KAESER DC 5.8 - Heatless Regenerated
Adsorption Dryer - KAESER DC 5.8 E - Heatless Regenerated
Adsorption Dryer - KAESER DC 7.5 - Heatless Regenerated
Adsorption Dryer - KAESER DC 7.5 E - Heatless Regenerated
Adsorption Dryers
Refrigerant Dryer "Ultra.dry" - Time Controlle - 16 bar
Refrigerant Type Dryer "Ultra.dry" - 16 bar - Level Guided
Bypass Line
Refrigerant Dryer
Refrigerant Dryer
Air Dehumifiers
It will be soon available
Piston Compressor SilentMaster - SEM 30-8-4 W - silent running - 19 l/min.
Piston Compressor SilentMaster - SEM 50-8-9 W - quiet running - 36 l/min.
Piston compressor SCHNEIDER - SilentMaster - SEM 100-8-6 W-oilfree - 50 l/min.
Piston compressor SCHNEIDER - SilentMaster - SEM 200-8-6 W-oilfree - 110 l/min.
Reciprocating piston compressor - EKOM KOMPAKT - 70 l/min. - oilfree
Reciprocating piston compressor - EKOM PLUS - 70 l/min. - oilfree
Reciprocating piston compressor - EKOM PLUS 2V - 140 l/min. - oilfree
Reciprocating piston compressor - EKOM 2V/110 - 140 l/min. - oilfree
Reciprocating piston compressor - EKOM 2x2V/110 - 280 l/min. - oilfree
Piston Compressor SilentMaster - SEM 255-10-50 W - quiet running - 10 bar - 165 l/min.
Silent running compressor SilentMaster STV - SEM-STV 650-10-270 - 10 bar - 520 l/min. - with standing pressure tank
Silent running compressor SilentMaster STV - SEM-STV 650-10-270 PT - 10 bar - 520 l/min. - with standing pressure tank and refrigerant dryer
Silent running compressor SilentMaster STV - SEM-STV 650-10-270 DKS - 10 bar - 520 l/min. - with standing pressure tank and complete module Öwadry
Silent running compressor SilentMaster STH - 10 bar - 365 or 520 l/min. - with horizontal pressure tank
Silent runnning compressor SilentMaster STH - SEM-STH 650-10-270 - 10 bar - 520 l/min. - with horizontal pressure tank
Silent running compressor SilentMaster STS - 10 bar - 365 bis 950 l/min. - without pressure tank
Eco-Line
JUN-AIR oil SJ 27 - Bottle 0.5 l
super silent-compressor - "JUN-AIR" type OF302 - oilfree
super silent-compressor - "JUN-AIR" type 4
super silent-compressor - "JUN-AIR" type 3-4
super silent-compressor - "JUN-AIR" type 6
super silent-compressor - "JUN-AIR" type 12
super silent-compressor - "JUN-AIR" type 18-40B
super silent-compressor - "JUN-AIR" type 24-40
super silent-compressor - "JUN-AIR" type 36-150
super silent-compressor - "JUN-AIR" type OF301 - oilfree
super silent-compressor - "JUN-AIR" type 2xOF302 - oilfree
super silent-compressor - "JUN-AIR" type OF1202-40 - oilfree
super silent-compressor - "JUN-AIR" type 2xOF1202-150 - oilfree
Jun-Air-Compressor - Type OF1202-40M - oilless
super silent-compressor - "JUN-AIR" type 2000-25 - oilfree
super silent-compressor - "JUN-AIR" type 2000-40 - oilfree
super silent-compressor - "JUN-AIR" type 4000-40 - oilfree
super silent-compressor - "JUN-AIR" type 4000-150 - oilfree
super silent-compressor - "JUN-AIR" type 6000-150B - oilfree
super silent-compressor - "JUN-AIR" type 8000-150B - oilfree
JunAir
Low Noise Compressors
Diving sport compressor - Junior II
Diving sport compressor - Junior II
Diving sport compressor - Junior II
Diving sport compressor - Junior II
Diving sport compressor - Junior II
Diving sport compressor - Junior II
Diving sport compressor - Junior II
Diving sport compressor - Junior II
Breathing Air compressors
Rotation compressor Mannesmann - Demag - Wittig type RL 80 LH
Rotary Compressors
Screw Compressor - Rennerle RSR - 1,8 to 3,0 kW
Screw Compressor - Rennerle RSDR - 1,8 to 3 kW
Screw Compressor - Rennerle RSDR-M - 1,8 To 3,0 kW - Mobile
Screw Compressor - RS-Compact 3,0 - 3 kW
Screw Compressor - RS-Compact 4,0 - 4 kW
Screw Compressor - Renner RS 3,0 - RS 55,0
Screw Compressor - RSD 3,0 To RSD 15,0
Screw Compressor With Refrigeration Dryer - RSK 3,0 - RSK 45,0
Screw Compressor - RSDK 3,0 bis RSDK 15,0 - with Pressure Tank and Refrigerant Dryer
Screw Compressor - RSF - Flow Rate 0,21 m³ To 2,24³/min
Screw Compressor - RSKF - Flow Rate 0,09 m³ To 7,25m³/min
Screw Compressor - RS-ET - Flow Rate 0,21 m³ To 9,30 m³/min
Screw Compressors - Air-Master - 5,5 Up To 7,5 kW
Screw Compressors - Air-Master - 11 To 22 kW
Screw Compressor - Air-Master - 10 bar
Screw Compressor - Air-Master - 10 bar
Screw Compressor - Air-Master - PN 10 -
Screw Compressor - Air-Master - PN 10 - Tandem Tank
Screw Compressor - Air-Master - 10 PN
Screw Compressor - Air-Master - 11 to 15 kW
Screw Compressor - Air-Master - 11 To 15 kW - PN Up To 13
Screw Compressors - Air-Master - 11 - 15 kW - PN Up To 13
Screw Compressor - KAESER - Mobilair 123 - 88 kW - PN 12
Screw Compressors
Piston compressor SCHNEIDER - BaseMaster - BAM 200-8-25 W-oilfree
It will be soon available
It will be soon available
Piston compressor KOALA2 - oilfree and portable - 12V/24V - 8 bar - 60 l/min
Piston Compressor - Delta 2 - 180 l/min. - 3,8 bar - oilfree
Piston Compressor - Delta 2 - 200 l/min. - 3,8 bar - oilfree
12/24 V super silent-compressor - "JUN-AIR" type OF301 DC - oilfree - 8 bar - 20 l/min
Reciprocating piston compressor - EKOM KOMPAKT - 70 l/min. - oilfree
Reciprocating piston compressor - EKOM PLUS - 70 l/min. - oilfree
Reciprocating piston compressor - EKOM PLUS 2V - 140 l/min. - oilfree
Compressed Air generator - Medic-Air MA 150-25 W-Silent - 100 l/min.
Reciprocating piston compressor - EKOM 2V/110 - 140 l/min. - oilfree
Compressed Air generator - Medic-Air MA 300-50 W-Silent - 200 l/min.
Reciprocating piston compressor - EKOM 2x2V/110 - 280 l/min. - oilfree
Medical Compresor Model Event Typ DK 50 D
Medical Compresor Model Event Typ DK 50 DM
Compressed Air generator - Medic-Air MA 600-90 W-Silent - 2x200 l/min.
Reciprocating piston compressor - EKOM DUPLEX - 480 l/min. - oilfree
Piston compressor - EKOM TOWER - 480 l/min. bis 1440 l/min. - oilfree
Oilfree Compressors
Piston Compressor - RBK - 10 bar - 210 To 1480 l/min.
Industrial Compressor - GZHP 550 - 35 bar - 410 l/min.
Piston Compressor - RIK - 10 bar - 210 To 1480 l/min.
Star-Delta-Switch for compressors starting from 4 kW
Piston Compressor - RIK-H - 15 bar - 280 To 1290 l/min.
Piston Compressor - UniMaster STH - 10 bar - 260 l/min.
Piston Compressor - UniMaster STH 460 - 10 bar - 375 l/min.
Piston Compressor - UniMaster STA 650-10-7 - 10 bar - 420 l/min.
Air Generator 10+Master STA - ZPM-STA 575-15-7 - 15 bar - 460 l/min.
Piston Compressor - UniMaster STH - 10 bar - 485 to 520 l/min. -
PKT-FILLMASTER 350 Compressor
Piston compressor - UniMaster STH - 10 Bar - 520 l/min. - stationary - with horizontal pressure tank
Air Generators 10+Master STV - 12 To 15 bar - 460 to 490 l/min.
Compressor 10+Master STV - 15 bar - 460 l/min.
Piston Compressor - UniMaster STA - 10 bar - 750 to 1300 l/min.
Air Generators 10+Master STV - 15 Bar - 525 To 1130 l/min.
Piston Compressor 10+Master STV - 15 bar - 460 l/min.
Piston Compressors 10+Master STS - ZPM-STS 750-15 - 525 l/min
Piston Compressor - UniMaster STH 960 - 10 Bar - 750 l/min.
Piston Compressor 10+Master STV - 15 bar - 525 To 820 l/min
Compressed Air Generators 10+Master STV - ZPM-STV 750-15-500 - 525 l/min
Piston Compressor 10+Master STV - ZPM-STV 575-15-300 DKS - 15 bar - 460 l/min.
Piston Compressor - UniMaster STH 650/650-10-500 TD - 10 Bar - 2x520 l/min.
Piston Compressor 10+Master STS - ZPM-STS 1050-15 - 15 bar - 765 l/min.
Compressed Air Generators 10+Master STV - ZPM-STV 750-10-500 PT - 15 bar - 575 l/min
Piston Compressor - UniMaster STH 1410-10-500 - 10 Bar - 990 l/min.
Piston Compressor - DZHP 200/250 - 35 bar - 145 l/min
Piston Compressor 10+Master STV - ZPM-STV 750-15-500 DKS - 15 bar - 575 l/min.
Industrial Compressors
Compressor in Systainer - AEROTAINER 200 - 3l
Combi In Systainer - AEROTAINER TWIN
Piston Compressor - RBK - 10 bar - 210 To 1480 l/min.
Piston Compressor - RIK - 10 bar - 210 To 1480 l/min.
Piston Compressor SilentMaster - SEM 255-10-50 W - quiet running - 10 bar - 165 l/min.
Piston Compressor - RIK-H - 15 bar - 280 To 1290 l/min.
Piston compressor - UniMaster STV 460-10-200 - 10 bar - 375 l/min. - with stationary pressure tank
V-Belt Driven Compressor - MOUNTAINE 600 - 250 l Stationary
Piston compressor - UniMaster STV - 10 bar - 485 to 520 l/min. - with stationary pressure tank
V-Belt Driven Compressors - ORKAN 600 - 250 l Stationary
Piston compressor - UniMaster STV - 10 bar - 680 to 750 l/min. - stationary tank - without Star triangle switch
V-Belt Driven Compressor - MOUNTAINE 900 - 250 l Stationary
Silent running compressor SilentMaster STS - 10 bar - 365 bis 950 l/min. - without pressure tank
Piston compressor - UniMaster STV - 10 bar - 485 to 520 l/min. - stationary tank - with refrigerant dryer
V-Belt Driven Compressors - ORKAN 900 - 250 l Stationary
Silent runnning compressor SilentMaster STH - SEM-STH 650-10-270 - 10 bar - 520 l/min. - with horizontal pressure tank
Silent running compressor SilentMaster STV - SEM-STV 650-10-270 - 10 bar - 520 l/min. - with standing pressure tank
Silent running compressor SilentMaster STH - 10 bar - 365 or 520 l/min. - with horizontal pressure tank
Piston compressor - UniMaster STV - 5,5 kW - stationary tank - with refrigerant dryer
Piston compressor - UniMaster STV - stationary - complete system - 10 bar - 520 l/min.
Piston compressor - UniMaster STV - 5,5 kW - stationary tank - with complete module Öwadry
Silent running compressor SilentMaster STV - SEM-STV 650-10-270 PT - 10 bar - 520 l/min. - with standing pressure tank and refrigerant dryer
Silent running compressor SilentMaster STV - SEM-STV 650-10-270 DKS - 10 bar - 520 l/min. - with standing pressure tank and complete module Öwadry
Stationary Compressors
Compressor - VIGON 120 - 12 l
Piston compressor SCHNEIDER - CompactMaster - CPM 160-8-2 W-oilfree - 8 bar - 70 l/min.
Piston compressor SCHNEIDER - BaseMaster - BAM 200-8-25 W - 8 bar - 115 l/min.
Compressor - ORKAN 212 - 24 L
Compressor - VIGON 300 - 50 l
Piston compressor SCHNEIDER - BaseMaster - BAM 250-10-50 W - 10 bar - 155 l/min.
Piston Compressor CompactMaster - CPM 200-8-12 W-oilfree - stationary - 8 bar - 115 l/min.
Piston Compressor 10+Master - ZPM 85-15-2 W - mobile - 15 bar - 49 l/min.
Piston Compressor CompactMaster - CPM 212-10-2 W - stationary - 10 bar - 125 l/min.
Compressor - PIONEER 282 - 20 l
Piston compressor PIONEER 212 - 1,1 kW
Compressor - VIGON 240 - 24 l
Piston Compressor CompactMaster - CPM 250-10-12 W - mobile - 10 bar - 155 l/min.
Compressor - TRAILER 300 - 19 l
Compressor-Set - TRAILER 300 - 19 l
Piston compressor SCHNEIDER - BaseMaster - BAM - 2,0 - 10 bar - 195 to 285 l/min.
Combi In Systainer - AEROTAINER TWIN
Piston compressor - BaseMaster - with condesate separator - 10 bar - 285 l/min.
Compressor - PIONEER 342 - 20 l
Compressor - TWINSTAR 450 - 50 l
Piston Compressor CompactMaster - CPM 342-10-20 W - mobile - 2,2 kW with pressure reducer - 10 bar - 265 l/min.
Piston Compressor BaseMaster - BAM-500 Series - mobile - 10 bar - 410 l/min.
Piston Compressor UniMaster - UNM 400 Series - mobile - with V-belt drive - 10 bar - 285 to 520 l/min.
Compressor - TWINSTAR 690 - 90 l
Piston Compressor UniMaster - UNM 400-10-50 W-ST - mobile - 2,2 kW with V-belt drive - 10 bar - 285 l/min.
Piston Compressor SuperMaster - SUM 320-10-60 D - mobile - 1,9 kW with direct drive - 10 bar - 240 l/min.
Piston Compressor CompactMaster - CPM 320-10-18 W - mobile - 1,9 kW with pressure reducer - 10 bar - 240 l/min.
Piston Compressor UniMaster - UNM 400-10-50 W-ST - mobile - with V-belt drive - 10 bar - 285 l/min.
Piston Compressor SuperMaster - SUM 400-10-60 D - mobile - 2,2 kW with direct drive - 10 bar - 300 l/min.
Piston Compressor SuperMaster - SUM 400-10-60 D - mobile - 400 kW with direct drive - 10 bar - 300 l/min.
Piston Compressor PetrolMaster - PEM 240-10-10 D - mobile - gasoline driven - 10 bar - 140 l/min.
Piston Compressor SuperMaster - SUM 400-10-60 D - mobile - with direct drive - 10 bar - 220 l/min.
Piston Compressor UniMaster - UNM 650-10-90 D - mobile - with V-belt drive - 10 bar - 520 l/min.
Piston Compressor 10+Master - ZPM 500-15 D - mobile - with V-belt drive - 15 bar - 400 l/min.
Piston Compressor CompactMaster - CPM 400-10-20 W - mobile - 2,2 kW with pressure reducer - 10 bar - 300 l/min.
Piston Compressor CompactMaster - CPM 560-10-20 D - mobile - with pressure reducer - 10 bar - 450 l/min.
Piston Compressor SilentMaster - SEM 320-10-60 W - silent running - 1,9 kW - 10 bar - 240 l/min.
Piston Compressor PetrolMaster - PEM 500-15-50 B - mobile - gasoline driven - 15 bar - 400 l/min.
Mobile Compressors
Craftsman Compressors
Air compressor 12 V - 7 bar - 35 l/min
Vibrating Armature Diaphragm Pump - Type 106 - 0.95 l/min - 270 mbar
Mini diaphragm pressure / vacuum pump 7010AC - 1,2 to 2,3 bar - 0,9 l/min
Vacuum Pump 7010DC - Mini diaphragm compressor - 1 to 2,2 bar - 1,0 l/min
rotary vane - pressure pumpe - oil-free - type DTE - 1.0 bar - 12 m³/h
Oilless Miniature Rocking Piston ROA-P201-BN - 0 to 7 bar - 3,3 l/min - 230V
Piston compressor KOALA2 - oilfree and portable - 12V/24V - 8 bar - 60 l/min
12/24 V super silent-compressor - "JUN-AIR" type OF301 DC - oilfree - 8 bar - 20 l/min
Mini Compressors
Compressors
Level Control Valve - For Big And Medium Size Storage Tank
Level Valve - For Compact Storage Tanks
Level Valves
Filter Cartridge for pipe filter 124-AL
Pipeline filter 124-AL - filter pot nylon / filter head aluminium
Pipeline Filters
Short explanation about the classifications
Alternative Strainer For Dirt Arrester - Stainless Steel - 1,0 mm
Alternative Strainer For Dirt Arrester - Stainlss Steel - 0,50 mm/0,8 mm
Strainer - Brass - PN 16
Strainers - Nickel-Plated Brass - PN 16
Strainers - Red Brass - G 1/2" - Up To 10 bar
Strainer - Red Brass or Stainless Steel - PN 16 bar As PN 40 bar
Stainless steel pipe strainers
Strainer - Stainless Steel - PN 50
Sieves
Strainer for foot valves - BINDA FILTRO
Strainer for foot valves - BINDA FILTRO Stainless Steel
Strainer For Ball Valves, Light Construction Type
Strainers
Filters
Check Valve - NBR Sealing
Pinch Valves - Pneumatic With Female Thread - PVC/POM - Open In Idle Position - Up To 6 bar
Pneumatic Pinch Valves - Female Thread - Aluminium - Opened In Idle Position - Up To 6 bar
Pneumatic Pinch Valves - With Female Thread - Stainless Steel - Idle Position Open - Up To 6 bar
Pneumatic Pitch Valves With Flange DIN 2632 - Aluminium With Aluminium Flange - NBR-Sealing - Idle Position Open - Up To 6 Bar
Squeeze Valve, pneumatic with flange DIN 2632 - Aluminium - Idle position opened - to 6 bar
Pinch Valve, Pneumatic With Flange DIN 2632 - Aluminium - Idle Position Opened - Up To 6 bar
Pinch Valve, Pneumatic With Flange DIN 2632 - Stainless Steel - Idle Position Open - Up To 6 bar
Squeeze Valve, pneumatic with flange DIN 2632 - Stainless Steel - Idle position opened - to 6 bar
Pinch Valves
Spring Rod Valve - 3/2 And 5/2-Wege - M5 To G 1/8
Push-Button Switch (Ø 30,5 mm)
Valve Cap For Button Valves (Ø 30,5 mm) - Toggle-Button 60° Locking
Push-Button Switch (Ø 30,5 mm) - Palm Switch
Panel Valves for Button Valves - 60° Locking With Rotary Switch
3/2-Way-Button Valve M5 Control Panels Ø22,5 mm - Base Body
Cap Valves For Toggle-Switches (Ø 22,5 mm) - Toggle-Switches
3/2-Way-Button Valve M5 Control Panels Ø22,5 mm - Push-Button - 13 N
3/2-Way-Button Valve M5 Control Panels Ø22,5 mm - Push-Button - 15 N
3/2-Way-Button Valve M5 Control Panels Ø22,5 mm - Palm-Button - 13 N
3/2-Way-Button Valve M5 Control Panels Ø30,5 mm - Palm-Button - 15 N
3/2-Way-Button Valve M5 Control Panels Ø30,5 mm - Rotary Grip - 15 N
3/2-Way-Button Valve M5 Control Panels Ø22,5 mm - Toggle Switch - 26 N
3/2-Way-Button Valve M5 Control Panels Ø30,5 mm - Emergency Stop Button - 31 N
3/2-Way-Button Valve M5 Control Panels Ø22,5 mm - Toggle Switch - 6 N
5/2-Way-Button Valve M5 For Control Panel Ø22,5 mm - Base Body
3/2-Way-Button Valve M5 Control Panels Ø30,5 mm - Rocker Switch - 9 N
Valve Caps For Button Valves (Ø 30,5 mm) - Press-Button With 2 Keys
5/2-Way-Button Valve M5 For Control Panel Ø22,5 mm - Push Button - 23 N
5/2-Way-Button Valve M5 For Control Panel Ø30,5 mm - Push-Button - 24 N
5/2-Way-Button Valve M5 For Control Panel Ø22,5 mm - Palm Button - 23 N
5/2-Way-Button Valve M5 For Control Panel Ø30,5 mm - Palm-Button - 25 N
Cap Valves For Button Switches - Key Locking - 60° With 2 Keys
5/2-Way-Button Valve M5 For Control Panel Ø30,5 mm - Rotary Switch - 25 N
5/2-Way Caliper And Rotary Switch G1/4" - Construction Type PMEV400
Cap Valves For Key Switches (Ø 22,5 mm) - Red Push-Button With 2 Keys
5/2-Way-Button Valve M5 For Control Panel Ø22,5 mm - Rotary-Button - 25 N
5/2-Way-Button Valve M5 For Control Panel Ø30,5 mm - Emergency-Off Button - 25 N
5/2-Way-Button Valve M5 For Control Panel Ø22,5 mm - Toggle-Switch - 12 N
5/2-Way-Button Valve M5 For Control Panel Ø30,5 mm - Rocker Switch - 25 N
3/2-Way-Button Valve M5 Control Panels Ø30,5 mm - Key-Switch - 26 N
3/2-Way-Button Valve M5 Control Panels Ø22,5 mm - Key Button - 24 N