The standard is classified into 4 ranges: fine - medium - rough - very rough
With the help of this standard, certain grades of roughness can be checked.
Available for grit- (G201) and shot-blast (S 101)

Technical data roughness: standard deviation 33 %

• G201: 23 - 28 µm 50 - 70 µm 85 - 115 µm 130 - 170 µm
• S 101: 23 - 28 µm 35 - 45 µm 60 - 80 µm 85 - 115 µm

Application Area

• For the detection and documentation of variables Ra, rz, Rmax and RPc accorrding to DIN En ISO/ AMSE / prEN 10049
• Roughness measurement of variables Rz and Ra according to the japanese standard JIS

Product description

• Measuring range - 90 µm, 180 µm, 350 µm (automatic switch)
• Selectable measuring unit - µm / µinch
• Standards - DIN / ISO / JIS / ASME
• Scanning tracks 1,75mm / 0,80mm / 2,50mm
• Selectable short cut off
• Numbers of single measurement selectable between 1 to 5
• Phase correction Gauß-filter according to EN iSO 11562
• Automatic scaling depending on the captured profile
• Lock-up against not wanted changes of the system configuration

Application Area

• Perthometer for the detection and documentation of the variables Ra, Rz, Rmax and RPc according to DIN EN ISO/ AMSE / prEN 10049 and roughness measurement of the variables Rz and Ra according to the japanese Standard JIS

Product decription

• Measuring range - 150 µm
• Measuring unit  - chooseable between µm / µinch
• Standards - DIN / ISO / JIS
• Scan tracks - 1,75 mm, 5,6 mm, 17,5 mm
• Cut off - 0,25 mm / 0,80 mm / 2,50 mm
• Selectable short cut off
• Standardized automated selection of the scanning track
• Phase correction Gauß-filter according to DIN EN ISO 11562
• Automated scaling depending on the captured profile
• Printing of roughness profiles, results protocolls - dynamic calibration fuctionality
• Lock up against not wanted changes of the system configuration

Technical data

• Operating temperature - 5 °C up to 40 °C
• relative humidity - 30% up to 85%