Thermoplastic hose TP-R8NC - according to SAE 100 R8 - PU / PEL - DN 6 to 12 - outside Ø 11.5 to 19.9 mm - PN up to 350 - price per roll
| From € 301,57 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The non-conductive thermoplastic hose is ideal for high-pressure use with mineral oils, hydraulic oils and media based on phosphate esters and for use in areas of power generation, on rescue equipment, on aerial work platforms and cable cutting devices, where non-conductive hoses are required.
- The hose is not suitable for use with gas.
- The outer cover of the hose is made of orange-colored polyurethane, the inner core is a seamlessly extruded polyester tube. Aramid or Kevlar fibers serve as pressure carriers.
- The hose exceeds the requirements of SAE 100 R1 and enables precise control of the hydraulics at maximum working pressure thanks to its high pulse resistance and low expansion.
- The abrasion-resistant hose offers high weather and age resistance.
- Caution: Non-conductive hoses must not be pricked.
- External ceiling material - polyurethane, non-conductive
- Inner core material - seamlessly extruded polyester tube (PEL)
- Material reinforcement - aramid / kevlar fibers
- Nominal size - 6 to 12
- Size - 4 to 8
- Outside Ø - 11.5 to 19.9 mm
- Inside Ø - 6.5 to 13 mm
- Bending radius - 35 to 45 mm
- Operating pressure - 245 to 350 bar
- Test pressure (static) - 490 to 700 bar
- Burst pressure - 980 to 1400 bar
- Layers - 2
- MSHA approval - no
- Safety factor - 4: 1
- Temperature range - -40 to max. +100 ° C (+ 70 ° C for air- and water-based media)
- Norm / Standards - SAE 100R8 // EN855-R8 // ISO3949-R8. The tubing meets SAE J517 / J343 and EN855 standards for non-conductivity, where a maximum electrical leakage of 50 µA must not exceed 50 µA when a 152 mm sample is subjected to 37.5 KV for 5 minutes. Corresponds to 250 KV / meter.
- Roll - 15-25 m
Versions: (4)
Narrow down your selection
DN
Size
inch
Outside Ø
Indoor Ø
Bending radius
operating pressure
Proof pressure
Burst pressure
role
| Article No. | DN | Size | inch | Outside Ø | Indoor Ø | Bending radius | operating pressure | Proof pressure | Burst pressure | role | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
7033TPR806NC | 6th | 4th | 1/4 " | 11.5 mm | 6.5 mm | 50 mm | 350 bar | 700 bar | 1400 bar | 25 m |
|
||||
|
||||||||||||||||
|
|
7033TPR808NC | 8th | 5 | 5/16 " | 13.4 mm | 8.1 mm | 55 mm | 300 bar | 600 bar | 1200 bar | 25 m |
|
||||
|
||||||||||||||||
|
|
7033TPR810NC | 10 | 6th | 3/8 " | 15.5 mm | 9.7 mm | 60 mm | 280 bar | 560 bar | 1120 bar | 15 m |
|
||||
|
||||||||||||||||
|
|
7033TPR812NC | 12th | 10 | 1/2 | 19.9 mm | 13 mm | 80 mm | 245 bar | 490 bar | 980 bar | 15 m |
|
||||
|
||||||||||||||||
Ratings
No evaluation has been given
