End mills VHM TiAlN UF - for steel and cast iron - shaft HB - Type N - DIN 6527
| From € 41,99 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- End mill used for milling wedge and keyways
- As well for universal processing.
- For steel, 850N, 1000N, 1400 N, 42HRc and cast iron materials
- For milling depths up to max. 1.5 x d or more sharpened.
- With center cutting
- Cutting speed approximately 50% higher than for uncoated tools.
- Dry processing possible.
- Material - VHM TiAlN UF, Type N
- Cutting - 2 pieces
- Right spiral - 30 ° angle
- Shaft - HB
Versions: (14)
Narrow down your selection
Ø d1 = h 10
Cutting length l2
Length l1
Shaft Ø d2 = h 6
| Article No. | Ø d1 = h 10 | Cutting length l2 | Length l1 | Shaft Ø d2 = h 6 | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|
|
|
943115345010 | 2.0 mm | 6 mm | 57 mm | 6 mm |
|
||||
|
||||||||||
|
|
943115345013 | 3.0 mm | 7 mm | 57 mm | 6 mm |
|
||||
|
||||||||||
|
|
943115345016 | 4.0 mm | 8 mm | 57 mm | 6 mm |
|
||||
|
||||||||||
|
|
943115345019 | 5.0 mm | 10 mm | 57 mm | 6 mm |
|
||||
|
||||||||||
|
|
943115345022 | 6.0 mm | 10 mm | 57 mm | 6 mm |
|
||||
|
||||||||||
|
|
943115345025 | 7.0 mm | 13 mm | 63 mm | 8 mm |
|
||||
|
||||||||||
|
|
943115345028 | 8.0 mm | 16 mm | 63 mm | 8 mm |
|
||||
|
||||||||||
|
|
943115345031 | 9.0 mm | 16 mm | 72 mm | 10 mm |
|
||||
|
||||||||||
|
|
943115345034 | 10.0 mm | 19 mm | 72 mm | 10 mm |
|
||||
|
||||||||||
|
|
943115345040 | 12.0 mm | 22 mm | 83 mm | 12 mm |
|
||||
|
||||||||||
|
|
943115345043 | 14.0 mm | 22 mm | 83 mm | 14 mm |
|
||||
|
||||||||||
|
|
943115345046 | 16.0 mm | 26 mm | 92 mm | 16 mm |
|
||||
|
||||||||||
|
|
943115345049 | 18.0 mm | 26 mm | 92 mm | 18 mm |
|
||||
|
||||||||||
|
|
943115345052 | 20.0 mm | 32 mm | 104 mm | 20 mm |
|
||||
|
||||||||||
Ratings
No evaluation has been given
