You are in the Privatkunden-Shop (Switch to business to business shop)
Bitte warten...

End mill, Ød1 = e8. 6-25, VHM UF, TiAlN, Shaft: HA, for INOX-processing

From  49,72
Preis inkl. MwSt.
plus € 11,78 shipping costs

Do you have any questions?
We would like to assist you!
 
Product Description
  • For the INOX-processing
  • Can be used for peripheral milling, trimming and fine finishing.
  • Dry machining possible.
Application
  • FORUM solid carbide end mills
  • Due to the 45 ° spiral a soft, peel draped cut and thus a high surface quality produced.
  • A burr formation on the cutting edges is avoided.
  • Cutting speed approximately 50% higher than with uncoated tools.
  • After factory standard, center cutting.

Versions: (11)

Ø d1 = e8
Cutting length l2
Total length l1
Shank diameter d2 = h 6
Number of teeth

Artikel-Nr. Ø d1 = e8 Cutting length l2 Total length l1 Shank diameter d2 = h 6 Number of teeth Preis inkl. MwSt.
4317784893121 6.0 mm 13 mm 57 mm 6 mm 6 mm 64 mm 17 mm 12 mm
 49,72
Preis inkl. MwSt.
4317784893138 7.0 mm 16 mm 63 mm 8 mm 6 mm 89 mm 19 mm 17 mm
 62,94
Preis inkl. MwSt.
4317784893145 8.0 mm 19 mm 63 mm 8 mm 6 mm 88 mm 19 mm 17 mm
 62,94
Preis inkl. MwSt.
4317784893152 9.0 mm 19 mm 72 mm 10 mm 6 mm 89 mm 19 mm 17 mm
 94,24
Preis inkl. MwSt.
4317784893169 10.0 mm 22 mm 72 mm 10 mm 6 mm 89 mm 19 mm 17 mm
 94,24
Preis inkl. MwSt.
4317784893176 12.0 mm 26 mm 83 mm 12 mm 6 mm 91 mm 19 mm 17 mm
 128,08
Preis inkl. MwSt.
4317784893183 14.0 mm 26 mm 83 mm 14 mm 6 mm 103 mm 27 mm 24 mm
 160,28
Preis inkl. MwSt.
4317784893190 16.0 mm 32 mm 92 mm 16 mm 6 mm 102 mm 27 mm 24 mm
 215,49
Preis inkl. MwSt.
4317784893206 18.0 mm 32 mm 92 mm 18 mm 8 mm 111 mm 29 mm 27 mm
 251,96
Preis inkl. MwSt.
4317784893213 20.0 mm 38 mm 104 mm 20 mm 8 mm 119 mm 29 mm 27 mm
 316,59
Preis inkl. MwSt.
4317784893220 25.0 mm 44 mm 104 mm 25 mm 8 mm 156 mm 37 mm 34 mm
 558,56
Preis inkl. MwSt.

Detailed Description

End mill, Ød1 = e8. 6-25, VHM UF, TiAlN, Shaft: HA, for INOX-processing
Product Description
  • For the INOX-processing
  • Can be used for peripheral milling, trimming and fine finishing.
  • Dry machining possible.
Application
  • FORUM solid carbide end mills
  • Due to the 45 ° spiral a soft, peel draped cut and thus a high surface quality produced.
  • A burr formation on the cutting edges is avoided.
  • Cutting speed approximately 50% higher than with uncoated tools.
  • After factory standard, center cutting.
Technical Data
  • Type: N
  • Shaft: HA
  • Material: Solid carbide UF, TiAlN
  • Teeth: 6-8
  • Spiral: 45 °

Ratings

I would like to evaluate this item!

No evaluation has been given
Alternative artilce codes: noinc