You are in the Privatkunden-Shop (Switch to business to business shop)
Bitte warten...

End mills, Ød1 = e8: 6-25, VHM UF, TiAlN, Shaft: HA, Z 6-8, FORUM

From  49,72
Preis inkl. MwSt.
plus € 11,78 shipping costs

Do you have any questions?
We would like to assist you!
 
Product Description
  • Can be used for peripheral milling, trimming and fine finishing.
  • Suitable for the HRC-processing to 62 HRC.
Application
  • FORUM solid carbide end mills
  • Cutting speed approximately 50% higher than with uncoated tools. Dry machining possible.
  • After factory standard, center cutting.

Versions: (11)

Ø d1 = e8
Cutting length l2
Total length l1
Shank diameter d2 = h 6
Number of teeth

Artikel-Nr. Ø d1 = e8 Cutting length l2 Total length l1 Shank diameter d2 = h 6 Number of teeth Preis inkl. MwSt.
4317784892902 6.0 mm 13 mm 57 mm 6 mm 6 mm 64 mm 17 mm 12 mm
 49,72
Preis inkl. MwSt.
4317784892919 7.0 mm 16 mm 63 mm 8 mm 6 mm 89 mm 19 mm 17 mm
 62,94
Preis inkl. MwSt.
4317784892926 8.0 mm 19 mm 63 mm 8 mm 6 mm 65 mm 17 mm 17 mm
 62,94
Preis inkl. MwSt.
4317784892933 9.0 mm 19 mm 72 mm 10 mm 6 mm 89 mm 19 mm 17 mm
 94,24
Preis inkl. MwSt.
4317784892940 10.0 mm 22 mm 72 mm 10 mm 6 mm 88 mm 19 mm 17 mm
 94,24
Preis inkl. MwSt.
4317784892957 12.0 mm 26 mm 83 mm 12 mm 6 mm 87 mm 19 mm 17 mm
 128,08
Preis inkl. MwSt.
4317784892964 14.0 mm 26 mm 83 mm 14 mm 6 mm 96 mm 27 mm 24 mm
 160,28
Preis inkl. MwSt.
4317784892971 16.0 mm 32 mm 92 mm 16 mm 6 mm 102 mm 27 mm 24 mm
 215,49
Preis inkl. MwSt.
4317784892988 18.0 mm 32 mm 92 mm 18 mm 8 mm 112 mm 29 mm 27 mm
 251,96
Preis inkl. MwSt.
4317784892995 20.0 mm 38 mm 104 mm 20 mm 8 mm 122 mm 29 mm 27 mm
 316,59
Preis inkl. MwSt.
4317784893008 25.0 mm 44 mm 104 mm 25 mm 8 mm 152 mm 37 mm 34 mm
 558,56
Preis inkl. MwSt.

Detailed Description

End mills, Ød1 = e8: 6-25, VHM UF, TiAlN, Shaft: HA, Z 6-8, FORUM
Product Description
  • Can be used for peripheral milling, trimming and fine finishing.
  • Suitable for the HRC-processing to 62 HRC.
Application
  • FORUM solid carbide end mills
  • Cutting speed approximately 50% higher than with uncoated tools. Dry machining possible.
  • After factory standard, center cutting.
Technical Data
  • Material: Solid Carbide TiAlN UF
  • Type: H
  • Angle: 45 °
  • Shaft: HA
  • According to DIN 6535 HA
  • Teeth: 6-8

Ratings

I would like to evaluate this item!

No evaluation has been given
Alternative artilce codes: noinc