Reamer, Ø: 2-32 mm, cutting length: 50-265 mm, HSS

From  22,87
Price incl. VAT

Do you have any questions?
We would like to assist you!
 
Product Description
  • For reaming through holes for hole tolerance zone H7.
  • Due to the long, conical gating - the greater feed rates than with a straight-fluted reamer allowed - not suitable for the machining of blind holes.
  • Suitable for all ferrous, non-ferrous metals, plastics and for bores with interrupted cut.
Application
  • Reamer DIN 206-B
  • With unequal tooth pitch - a round, chatter marks and accurate drilling is achieved.
Technical Data
  • Approximately 7 ° left hand helix and a long, tapered cut (about 1/3 of cutting length).
  • Cylindrical clamping shaft with square.
  • Material: HSS
Other dimensions or form straight available on request.
Versions: (4)
Narrow down your selection
O
cutting length
total length
square
length
width
height
Article No. O cutting length total length square length width height Price incl. VAT
943114317784812696 2.00mm 25 mm 50 mm 1.6 mm 50 mm 2 mm 2 mm
22,87
Price incl. VAT
943114317784813006 28,00 mm 124 mm 247 mm 22.0 mm 247 mm 28 mm 28 mm
154,99
Price incl. VAT
943114317784813013 30.00 mm 124 mm 247 mm 22.0 mm 247 mm 30 mm 30 mm
163,23
Price incl. VAT
943114317784813020 32,00 mm 133 mm 265 mm 24.0 mm 265 mm 32 mm 32 mm
180,57
Price incl. VAT
Ratings


No evaluation has been given
Search terms: reamer, reamer, hand reamer, through-bore, a cap screw, hss, din206b, din 206-b, d206b, drilling, holes, reamers, drill, drill