From € 1.415,56 |
excl. VAT€ 1.415,56 |
Product Description
- the scale is suitable for use in the laboratory and can for weighing, dosing, formulation i.a. be used
- by type approval, the scale is also suitable for the trade
- Analytical balance with high-quality single-cell weighing system and a large display
- the single-cell weighing system represents a high mechanical robustness, high corner load security, stable temperature performance and fast settling time (about 3 seconds)
- it can be assigned a 4-digit scales identification number, this is printed on calibration protocol
- the internal automatic calibration automatically adjusts the balance every 4 hours and / or at temperature change greater than 2 ° C after
- Conversion from weight on the piece and adding up of formulation ingredients is possible
- Formulation / can Documenting be combined with the functions TARA / print, mixing ingredients for the recipe are numbered automatically and printed with number / weight (printer not included)
- at scales standstill balance perform at printer / PC attached an automatic data output by
- the units can keystroke on e.g. non-metric to be changed, deviation in% from a setpoint can be found
- the checkweighing allows you to set an upper and lower limit, portioning, dosing etc. is thus facilitated
- through the high-stability mode and other filter settings dosing is simplified
- RS-232 interface for connecting a printer, PC, etc. available, the internal GLP / ISO protocol is, regardless of the connected printer, date, time and weight value of
- the operation of the scale is carried out with a power adapter
- Please enter the verification request when ordering with, since the later date is no longer possible. For the calibration, the address of the installation site is required
- on request you get the certificate,
- Material weighing plate - stainless steel
- Display Type - LCD display with digit height 14 mm
- Overall dimensions (W x D x H) - 210 x 340 x 325 mm
- Dimensions weighing chamber (W x D x H) - 174 x 162 x 227 mm
- Max. Weighing range - 82-320 g
- Readability [d] - 0.1 mg
- Verification value [e] - 1 mg
- Minimum load [Min] - 10 mg
- Reproducibility - 0.2 mg
- Linearity - +/- 0.3 mg
- permissible ambient temperature - from 10 ° to 30 ° C
- Net weight - 6 kg
Calibration certificate on request; Specify calibration in order (subsequently not possible)
Versions: (4)
Narrow down your selection
Max. weighing
Accessories
€ 413,78 |
excl. VAT€ 413,78 |
€ 413,78 |
excl. VAT€ 413,78 |
€ 413,78 |
excl. VAT€ 413,78 |
Ratings
No evaluation has been given