You are in the Privatkunden-Shop (Switch to business to business shop)
Bitte warten...

Static Mixer PMS 3 - Stainless Steel Pipe With Teflon Elements - Straight Ends

From  277,77
Preis inkl. MwSt.
Free Shipment

Do you have any questions?
We would like to assist you!
 
Product Description
  • The mixed high-quality, solvent-resistant plastic are supported by a transverse bar output side arranged in the mixer housing made of stainless steel
Application
  • Application
  • The static mixer in stainless steel/plastic units are a cost effective alternative for the mixing of two-component acrylic systems
  • High mixing conditions and/or components with extreme differences in viscosity, we recommend the use mixers with 36 elements and easy-to-mix medias or Post mixing with 24 elements
  • Should be a complete cure of the components in the mixer, the lower cost enable a cheap replacement for simultaneous reduction of unproductive cleaning costs

Versions: (10)

Inner-Ø
Outer-Ø
Elements
Pressure
Length

Artikel-Nr. Inner-Ø Outer-Ø Elements Pressure Length Preis inkl. MwSt.
304320081024 8 mm 10 mm 24 226 bar 203 mm
 277,77
Preis inkl. MwSt.
304320081036 8 mm 10 mm 36 226 bar 300 mm
 299,77
Preis inkl. MwSt.
304320111424 11 mm 14 mm 24 242 bar 277 mm
 288,78
Preis inkl. MwSt.
304320111436 11 mm 14 mm 36 242 bar 411 mm
 322,62
Preis inkl. MwSt.
304320131624 13 mm 16 mm 24 212 bar 327 mm
 321,78
Preis inkl. MwSt.
304320131636 13 mm 16 mm 36 212 bar 486 mm
 423,12
Preis inkl. MwSt.
304320162024 16 mm 20 mm 24 226 bar 402 mm
 393,28
Preis inkl. MwSt.
304320162036 16 mm 20 mm 36 226 bar 596 mm
 415,29
Preis inkl. MwSt.
304320202524 20 mm 25 mm 24 226 bar 501 mm
 467,54
Preis inkl. MwSt.
304320202536 20 mm 25 mm 36 226 bar 744 mm
 605,58
Preis inkl. MwSt.

Detailed Description

Static Mixer PMS 3 - Stainless Steel Pipe With Teflon Elements - Straight Ends
Product Description
  • The mixed high-quality, solvent-resistant plastic are supported by a transverse bar output side arranged in the mixer housing made of stainless steel
Application
  • Application
  • The static mixer in stainless steel/plastic units are a cost effective alternative for the mixing of two-component acrylic systems
  • High mixing conditions and/or components with extreme differences in viscosity, we recommend the use mixers with 36 elements and easy-to-mix medias or Post mixing with 24 elements
  • Should be a complete cure of the components in the mixer, the lower cost enable a cheap replacement for simultaneous reduction of unproductive cleaning costs
Technical Data
  • Pipe Material - Stainless Steel
  • Material of Elements - Teflon (White)
  • Connetion Type - Straight Ends
  • Amount of Elements - 24 or 36 (Special Design on Request)
  • Fixing Elements - Bracket with Brazed Cross Bar
  • Calculated Pressure - Pressure calculated acc. to DIN 2413
  • Tolerance - Male-Ø and Wall Thickness acc. to DIN 2391, Length +/- 1 mm

Ratings

I would like to evaluate this item!

No evaluation has been given
Alternative artilce codes: noinc