Table Circular Saw Blade Diameter 250-400 mm - For Hardboard, Chipboard And Lami
| From € 86,20 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Application
- Application
- With alternating teeth
- For fine cuts in hard finished laminates, hardboard and chipboard up to 50mm cutting height
- Both sides in plastic-coated plates up to 30mm cutting height
- Circular Saw Blade Ø 250 mm - 400 mm
- Average Width of 3.2 / 2.2 to 3.5 / 2.5 cm
- Number of Teeth of 80 Alternating Teeth (WZ) to 120 Alternating Teeth (WZ)
- Positive Rake Angle
- Pin Holes:
- 2x 7mm - 42mm Bolt Circle
- 2x Ø 9mm - 46mm Bolt Circle
- 2x Ø 10mm - 60mm Bolt Circle
Versions: (9)
Narrow down your selection
Saw Blades-Ø
Hole-Ø
Cuttimng Width
Number of Teeth
Secondary Holes
| Article No. | Saw Blades-Ø | Hole-Ø | Cuttimng Width | Number of Teeth | Secondary Holes | Price incl. VAT | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
653125032880 | Ø 250 mm | Ø 30 mm | Ø 3,2 / 2,2 mm | 80 WZ | with |
|
|||||||||
|
||||||||||||||||
|
|
653130032812 | Ø 300 mm | Ø 30 mm | 3,2 / 2,2 mm | 120 WZ | with |
|
|||||||||
|
||||||||||||||||
|
|
653130032896 | Ø 300 mm | Ø 30 mm | 3,2 / 2,2 mm | 96 WZ | with |
|
|||||||||
|
||||||||||||||||
|
|
653135010710 | Ø 350 mm | Ø 30 mm | 3.5 / 2.5 mm | 108 WZ | with |
|
|||||||||
|
||||||||||||||||
|
|
653135035810 | Ø 350 mm | Ø 30 mm | 3.5 / 2.5 mm | 108 WZ | with |
|
|||||||||
|
||||||||||||||||
|
|
653135035884 | Ø 350 mm | Ø 30 mm | 3.5 / 2.5 mm | 84 WZ | with |
|
|||||||||
|
||||||||||||||||
|
|
653140035812 | Ø 400 mm | Ø 30 mm | 3.5 / 2.5 mm | 120 WZ | with |
|
|||||||||
|
||||||||||||||||
|
|
653140035884 | Ø 400 mm | Ø 30 mm | 3.5 / 2.5 mm | 84 WZ | with |
|
|||||||||
|
||||||||||||||||
|
|
653140035896 | Ø 400 mm | Ø 30 mm | 3.5 / 2.5 mm | 96 WZ | with |
|
|||||||||
|
||||||||||||||||
Ratings
No evaluation has been given
