Payment Types

PayPal
Master Card Visa

From € 5.950,52 Change foreign currency £ 5,153.15
excl. VAT€ 5.000,44 Change foreign currency £ 4,330.38
plus shipping costs

Wedge-bar three-jaw chucks, DIN 55029, T DURO, Rhoem

Item No.: 4019208228XXX
0 %  (0)
Brief Description
  • Chucks for milling machines, in conjunction with a base plate and stationary milling machines, dividing heads and machining center applications.


Detailed Description

Product Description
  • Chucks for milling machines, in conjunction with a base plate and stationary milling machines, dividing heads and machining center applications.
Application
  • Rhoem, wedge-bar three-jaw chucks DURO-T with short taper DIN 55029, with studs for Camlock.
Technical Data
  • Statically balanced and completely surface hardened chuck body.
  • Guaranteed accuracy with higher exposure to high stiffness, at up to 20% higher clamping forces.
  • The radial and axial runout tolerance is twice as accurate as in DIN 69386 / I prescribed.
  • The three-jaw lathe chuck has a visual mark for the quick jaw adjustment and attractive external shape with splash edge, ease of use and high Backenwechselwiederholgenauigkeit.
  • Due to the very good lubricating capabilities of highly stressed sliding surface as the thread and shaft-supporting, wedge bars, drive ring and slide rings, results in a very high corrosion protection.
  • Wedge-bar three-jaw chucks with base jaws and reversible top jaws and security key.

Version

size
short taper
Through hole Ø
D
F
Max.
torque *
Clamping force *
execution
length
width
height

Reset all filters

size short taper Through hole Ø D F Max. torque * Clamping force * execution length width height Priceexcl. VATItem No.
Inventory
x
 160 mm  4  42 mm  83.5 mm  82.6 mm  5.400 mm  40 Nm  30 kN  * Upon receipt of accuracy.  164 mm  164 mm  106 mm
€ 5.950,52 Change foreign currency £ 5,153.15
excl. VAT€ 5.000,44 Change foreign currency £ 4,330.38
4019208228341
Delivery within 7-10 days
Delivery time

Delivery within 7-10 days

x
 160 mm  5  42 mm  87.0 mm  104.8 mm  5.400 mm  40 Nm  30 kN  * Upon receipt of accuracy.  164 mm  164 mm  106 mm
€ 5.950,52 Change foreign currency £ 5,153.15
excl. VAT€ 5.000,44 Change foreign currency £ 4,330.38
4019208228358
Delivery within 7-10 days
Delivery time

Delivery within 7-10 days

x
 160 mm  6  42 mm  104 mm  133.4 mm  5.400 mm  40 Nm  30 kN  * Upon receipt of accuracy.  164 mm  164 mm  106 mm
€ 4.797,62 Change foreign currency £ 4,154.74
excl. VAT€ 4.031,61 Change foreign currency £ 3,491.37
4019208228365
Delivery within 7-10 days
Delivery time

Delivery within 7-10 days

x
 200 mm  5  52 mm  101 mm  104.8 mm  4.600 mm  60 Nm  48 kN  * Upon receipt of accuracy.  220 mm  220 mm  130 mm
€ 6.420,53 Change foreign currency £ 5,560.18
excl. VAT€ 5.395,40 Change foreign currency £ 4,672.42
4019208228389
Delivery within 7-10 days
Delivery time

Delivery within 7-10 days

x
 200 mm  6  52 mm  106 mm  133.4 mm  4.600 mm  60 Nm  48 kN  * Upon receipt of accuracy.  220 mm  220 mm  130 mm
€ 5.110,13 Change foreign currency £ 4,425.38
excl. VAT€ 4.294,23 Change foreign currency £ 3,718.80
4019208228396
Delivery within 7-10 days
Delivery time

Delivery within 7-10 days

x
 200 mm  8th  52 mm  125 mm  171.4 mm  4.600 mm  60 Nm  48 kN  * Upon receipt of accuracy.  220 mm  220 mm  130 mm
€ 5.352,50 Change foreign currency £ 4,635.27
excl. VAT€ 4.497,90 Change foreign currency £ 3,895.18
4019208228402
Delivery within 7-10 days
Delivery time

Delivery within 7-10 days

x
 250 mm  6  62 mm  117 mm  133.4 mm  4,200 mm  70 Nm  66 kN  * Upon receipt of accuracy.  255 mm  255 mm  126 mm
€ 6.569,26 Change foreign currency £ 5,688.98
excl. VAT€ 5.520,39 Change foreign currency £ 4,780.66
4019208228419
Delivery within 7-10 days
Delivery time

Delivery within 7-10 days

x
 250 mm  8th  62 mm  120 mm  171.4 mm  4,200 mm  70 Nm  66 kN  * Upon receipt of accuracy.  255 mm  255 mm  126 mm
€ 6.599,17 Change foreign currency £ 5,714.88
excl. VAT€ 5.545,52 Change foreign currency £ 4,802.42
4019208228426
Delivery within 7-10 days
Delivery time

Delivery within 7-10 days

x
 315 mm  6  87 mm  145 mm  133.4 mm  3,300 mm  80 Nm  80 kN  * Upon receipt of accuracy.  330 mm  330 mm  170 mm
€ 12.480,96 Change foreign currency £ 10,808.51
excl. VAT€ 10.488,20 Change foreign currency £ 9,082.78
4019208228433
Delivery within 7-10 days
Delivery time

Delivery within 7-10 days

x
 315 mm  8th  87 mm  136 mm  171.4 mm  3,300 mm  80 Nm  80 kN  * Upon receipt of accuracy.  330 mm  330 mm  170 mm
€ 9.147,84 Change foreign currency £ 7,922.03
excl. VAT€ 7.687,26 Change foreign currency £ 6,657.17
4019208228440
Delivery within 7-10 days
Delivery time

Delivery within 7-10 days

x
 315 mm  11  87 mm  143 mm  235.0 mm  3,300 mm  80 Nm  80 kN  * Upon receipt of accuracy.  330 mm  330 mm  170 mm
€ 8.972,41 Change foreign currency £ 7,770.11
excl. VAT€ 7.539,84 Change foreign currency £ 6,529.50
4019208228457
Delivery within 7-10 days
Delivery time

Delivery within 7-10 days

x
 400 mm  8th  102 mm  141 mm  171.4 mm  2,200 mm  90 Nm  95 kN  * Upon receipt of accuracy.  410 mm  410 mm  110 mm
€ 12.977,34 Change foreign currency £ 11,238.38
excl. VAT€ 10.905,33 Change foreign currency £ 9,444.02
4019208228464
Delivery within 7-10 days
Delivery time

Delivery within 7-10 days

x
 400 mm  11  102 mm  148 mm  235.0 mm  2,200 mm  90 Nm  100 kN  * Upon receipt of accuracy.  410 mm  410 mm  110 mm
€ 13.101,91 Change foreign currency £ 11,346.26
excl. VAT€ 11.010,01 Change foreign currency £ 9,534.67
4019208228471
Delivery within 7-10 days
Delivery time

Delivery within 7-10 days

No evaluation has been given


Other items in this category


0 %  (0)
Hexagon nut - various sizes - DIN 6330-B - "FORUM"
Detail 94982174070X
From € 0,60 Change foreign currency £ 0.52
excl. VAT€ 0,50 Change foreign currency £ 0.43

0 %  (0)
Conical seat type D - for M8 to M24 - DIN 6319D - "FORUM"
Detail 94982174120X
From € 1,00 Change foreign currency £ 0.87
excl. VAT€ 0,84 Change foreign currency £ 0.73

0 %  (0)
Spherical disk type C - for M8 to M24 - DIN 6319C - "FORUM"
Detail 94982174110X
From € 0,69 Change foreign currency £ 0.60
excl. VAT€ 0,58 Change foreign currency £ 0.50

0 %  (0)
Washer - for screws M6 to M24 - DIN 6340 - "FORUM"
Detail 94982174100X
From € 0,64 Change foreign currency £ 0.56
excl. VAT€ 0,54 Change foreign currency £ 0.47

100 %  (1)
Stud - various sizes - DIN 6379 - "FORUM"
Detail 94984217402X
From € 0,93 Change foreign currency £ 0.80
excl. VAT€ 0,78 Change foreign currency £ 0.68

0 %  (0)
Hexagon nut - various sizes - DIN 6331 - forged - "FORUM"
Detail 94982174081X
From € 0,95 Change foreign currency £ 0.82
excl. VAT€ 0,80 Change foreign currency £ 0.69

0 %  (0)
Conical seat type G - for M8 to M24 - DIN 6319G - "FORUM"
Detail 9498174120XX
From € 1,55 Change foreign currency £ 1.34
excl. VAT€ 1,30 Change foreign currency £ 1.13

0 %  (0)
Extension nut - T M6 to M24 - SW 10 to 36mm - "FORUM"
Detail 94982174090X
From € 1,71 Change foreign currency £ 1.48
excl. VAT€ 1,44 Change foreign currency £ 1.25

100 %  (1)
Slot nut - various sizes - DIN 508 - "FORUM"
Detail 94982174030X
From € 2,14 Change foreign currency £ 1.85
excl. VAT€ 1,80 Change foreign currency £ 1.56

0 %  (0)
Slot nut - various sizes - DIN 508 - long form - "FORUM"
Detail 94982174040X
From € 4,72 Change foreign currency £ 4.09
excl. VAT€ 3,97 Change foreign currency £ 3.44

0 %  (0)
Slot nut "Rhombus" - various sizes - "FORUM"
Detail 94982174050X
From € 5,63 Change foreign currency £ 4.87
excl. VAT€ 4,73 Change foreign currency £ 4.10

0 %  (0)
Clamps - steel - plain - slot width 11 to 22mm - "FORUM"
Detail 94982174150X
From € 9,16 Change foreign currency £ 7.94
excl. VAT€ 7,70 Change foreign currency £ 6.67

0 %  (0)
Ball cap - steel - head Ø 37mm - "FORUM"
Detail 949817431010
€ 10,12 Change foreign currency £ 8.76
excl. VAT€ 8,50 Change foreign currency £ 7.36

80 %  (1)
Eccentric tension clamp - for clamping jigs - "PowerClamp"
Detail 94982174141X
From € 13,26 Change foreign currency £ 11.48
excl. VAT€ 11,14 Change foreign currency £ 9.65

0 %  (0)
Stepped jack - cast - size 50mm to 320mm - DIN 6318 - "FORUM"
Detail 94982174250X
From € 32,70 Change foreign currency £ 28.32
excl. VAT€ 27,48 Change foreign currency £ 23.80

0 %  (0)
Prism cap - steel - size 45 mm - "FORUM"
Detail 949817432010
€ 20,21 Change foreign currency £ 17.50
excl. VAT€ 16,98 Change foreign currency £ 14.70

0 %  (0)
Prism attachment - Steel - Size 45 mm - "FORUM"
Detail 949821743201
€ 23,37 Change foreign currency £ 20.24
excl. VAT€ 19,64 Change foreign currency £ 17.01

0 %  (0)
T-nut - lose - various sizes - DIN 6323 - "AMF"
Detail 9498217405XX
From € 31,51 Change foreign currency £ 27.29
excl. VAT€ 26,48 Change foreign currency £ 22.93

0 %  (0)
Fixing cap - steel - sizes 14/25 - "FORUM"
Detail 94981743301X
From € 44,89 Change foreign currency £ 38.87
excl. VAT€ 37,72 Change foreign currency £ 32.67

0 %  (0)
Tension clamp Pitbull ® - steel - knife edge - "PowerClamp"
Detail 9498174143XX
From € 29,01 Change foreign currency £ 25.12
excl. VAT€ 24,38 Change foreign currency £ 21.11

0 %  (0)
Parallel pads pair - various sizes - "AMF"
Detail 94982172082X
From € 84,45 Change foreign currency £ 73.14
excl. VAT€ 70,97 Change foreign currency £ 61.46

0 %  (0)
Base plate 6498FT-size M12x14 - 14mm nut - "AMF"
Detail 949817436203
€ 76,04 Change foreign currency £ 65.85
excl. VAT€ 63,90 Change foreign currency £ 55.34

0 %  (0)
Pull-down clamping claw - with eccentric screw - "PowerClamp"
Detail 94982174142X
From € 90,07 Change foreign currency £ 78.00
excl. VAT€ 75,69 Change foreign currency £ 65.55

0 %  (0)
Mandrel XPA - steel - various sizes - "PowerClamp"
Detail 94982174143X
From € 90,63 Change foreign currency £ 78.49
excl. VAT€ 76,16 Change foreign currency £ 65.95

0 %  (0)
Ratchet clamping lever - Steel - Sizes M12 and M16 - "FORUM"
Detail 94982174220X
From € 74,29 Change foreign currency £ 64.34
excl. VAT€ 62,43 Change foreign currency £ 54.06

0 %  (0)
Flat clamp - steel - grooves 12 to 22mm - "FORUM"
Detail 94982174360X
From € 123,76 Change foreign currency £ 107.18
excl. VAT€ 104,00 Change foreign currency £ 90.06

0 %  (0)
Rip fence-pair - various sizes - DIN 7168 - "AMF"
Detail 94982174052X
From € 178,76 Change foreign currency £ 154.81
excl. VAT€ 150,22 Change foreign currency £ 130.09

0 %  (0)
Flat clamp - double - different versions - "AMF"
Detail 94982174361X
From € 152,36 Change foreign currency £ 131.94
excl. VAT€ 128,03 Change foreign currency £ 110.87

0 %  (0)
5D workpiece stop - 150mm Tschorn - adjustable
Detail 949842147012
€ 175,38 Change foreign currency £ 151.88
excl. VAT€ 147,38 Change foreign currency £ 127.63

0 %  (0)
Clamping screws various dimensions - in wooden box - "FORUM"
Detail 94982174130X
From € 260,81 Change foreign currency £ 225.86
excl. VAT€ 219,17 Change foreign currency £ 189.80

0 %  (0)
Side spanner 6498 - steel - size M12 x 14 - "AMF"
Detail 949817436150
€ 273,24 Change foreign currency £ 236.62
excl. VAT€ 229,61 Change foreign currency £ 198.84

0 %  (0)
Stable jaw - malleable iron - grooves to 30mm - "FORUM"
Detail 94982174350X
From € 333,09 Change foreign currency £ 288.46
excl. VAT€ 279,91 Change foreign currency £ 242.40

0 %  (0)
Jack - steel - size 300/460mm - hard - "FORUM"
Detail 94981742801X
From € 334,94 Change foreign currency £ 290.06
excl. VAT€ 281,46 Change foreign currency £ 243.74

0 %  (0)
Parallels pads - various sizes - Type "Super Precision" - "FOR"
Detail 94982172220X
From € 438,19 Change foreign currency £ 379.48
excl. VAT€ 368,23 Change foreign currency £ 318.89

0 %  (0)
Parallels pads - various sizes - type "Precision" - "FORUM"
Detail 94982172230X
From € 518,97 Change foreign currency £ 449.43
excl. VAT€ 436,11 Change foreign currency £ 377.67

0 %  (0)
Parallel pad set - various sizes - ISO 2768 - "FORUM"
Detail 949817222010
€ 558,43 Change foreign currency £ 483.60
excl. VAT€ 469,27 Change foreign currency £ 406.39

0 %  (0)
Clamping tool - assortment box - DIN
Detail 949817414000
From € 618,90 Change foreign currency £ 535.96
excl. VAT€ 520,08 Change foreign currency £ 450.39

0 %  (0)
Four jaw chucks DURO, Rhoem
Detail 945031541555
From € 1.358,50 Change foreign currency £ 1,176.46
excl. VAT€ 1.141,60 Change foreign currency £ 988.63

0 %  (0)
Drapes - rubber - DIN / EN IEC 61112 - 500/1000 mm
Detail 949898670x
From € 66,18 Change foreign currency £ 57.31
excl. VAT€ 55,61 Change foreign currency £ 48.16

0 %  (0)
Clamping plate set / Spannpratzensatz M10
Detail 9498AF581000
€ 131,96 Change foreign currency £ 114.28
excl. VAT€ 110,89 Change foreign currency £ 96.03

0 %  (0)
Four jaw chucks - size A 80 to 500 mm - DIN 6350 - Cast-ZG
Detail 94984019208027X
From € 913,16 Change foreign currency £ 790.80
excl. VAT€ 767,36 Change foreign currency £ 664.53

0 %  (0)
Spare jaw for three / four-jaw chucks, Set 3 Parts
Detail 40192080345XX
From € 117,96 Change foreign currency £ 102.16
excl. VAT€ 99,13 Change foreign currency £ 85.85

0 %  (0)
Knebel key BASKN Bessey
Detail 4008158019048
€ 41,13 Change foreign currency £ 35.62
excl. VAT€ 34,56 Change foreign currency £ 29.93

0 %  (0)
Spare jaw for three / four-jaw chucks, Set 3 Parts
Detail 4019208034zzz
From € 383,42 Change foreign currency £ 332.04
excl. VAT€ 322,20 Change foreign currency £ 279.03

0 %  (0)
Chip protection for lathe chuck, ZG-ZS, RÖHM
Detail 4019208035XXX
From € 1,04 Change foreign currency £ 0.90
excl. VAT€ 0,87 Change foreign currency £ 0.75

0 %  (0)
Four-jaw Stz. D6350 DB80mm Röhm
Detail 4019208038yyy
From € 285,91 Change foreign currency £ 247.60
excl. VAT€ 240,26 Change foreign currency £ 208.07

0 %  (0)
Spare jaw for three / four-jaw lathe chuck, set 4-pieces
Detail 401920803XXXX
From € 158,01 Change foreign currency £ 136.84
excl. VAT€ 132,78 Change foreign currency £ 114.99

0 %  (0)
Base plate for lathe chuck, DIN6350, Rhoem
Detail 4019208042XXX
From € 737,25 Change foreign currency £ 638.46
excl. VAT€ 619,54 Change foreign currency £ 536.52

0 %  (0)
Baking unscrewing, OD: 153-342 mm
Detail 4019208059XXX
From € 1.674,81 Change foreign currency £ 1,450.38
excl. VAT€ 1.407,40 Change foreign currency £ 1,218.81

0 %  (0)
Revolving center, size: 102-114, HM-use, Rhoem
Detail 4019208059yyy
From € 1.209,06 Change foreign currency £ 1,047.05
excl. VAT€ 1.016,02 Change foreign currency £ 879.87

0 %  (0)
Chip protection, Set: 3-piece, for Chucks: ZG-ZS, Rhoem
Detail 40192080655XX
From € 17,10 Change foreign currency £ 14.81
excl. VAT€ 14,37 Change foreign currency £ 12.44

0 %  (0)
Revolving center, size: 484-486, Prolonged running tip Rhoem
Detail 4019208068xxx
From € 1.532,17 Change foreign currency £ 1,326.86
excl. VAT€ 1.287,54 Change foreign currency £ 1,115.01

0 %  (0)
Revolving tube center, stump, MK2 MK5, Rhoem
Detail 40192080AAAAA
From € 414,95 Change foreign currency £ 359.35
excl. VAT€ 348,70 Change foreign currency £ 301.97

0 %  (0)
Spare jaw for three / four-jaw lathe chuck, set 4-pieces
Detail 4019208034vvv
From € 188,25 Change foreign currency £ 163.02
excl. VAT€ 158,19 Change foreign currency £ 136.99

0 %  (0)
Spare jaw for three / four-jaw lathe chuck, set 4-pieces
Detail 40192080342xx
From € 511,93 Change foreign currency £ 443.33
excl. VAT€ 430,19 Change foreign currency £ 372.54

0 %  (0)
Revolving center No. 600, size: 02-10, MK1-MK5, Rhoem,
Detail 4019208000xxx
From € 295,08 Change foreign currency £ 255.54
excl. VAT€ 247,97 Change foreign currency £ 214.74

0 %  (0)
Revolving tube center, size: 272-275, MK2 MK5, Rhoem
Detail 4019208000yyy
From € 578,59 Change foreign currency £ 501.06
excl. VAT€ 486,21 Change foreign currency £ 421.06

0 %  (0)
Cast-Rohflansch For Chucks, Chuck Size: 80-315 mm, Rhoem
Detail 401920800XXXX
From € 30,45 Change foreign currency £ 26.37
excl. VAT€ 25,59 Change foreign currency £ 22.16

0 %  (0)
Revolving center, size: 101-110, Prolonged running tip Rhoem
Detail 40192080170xx
From € 443,60 Change foreign currency £ 384.15
excl. VAT€ 372,77 Change foreign currency £ 322.82

0 %  (0)
Tailstock, size: 102-110, with all inserts and siphoning
Detail 4019208017xxx
From € 919,97 Change foreign currency £ 796.69
excl. VAT€ 773,08 Change foreign currency £ 669.49

0 %  (0)
Revolving center, size: 503-506, Prolonged running tip Rhoem
Detail 40192080187xx
From € 1.500,48 Change foreign currency £ 1,299.42
excl. VAT€ 1.260,91 Change foreign currency £ 1,091.95

0 %  (0)
Key / security key with Aushebestift, for Chucks: DURO, Rhoem
Detail 4019208023VVV
From € 126,04 Change foreign currency £ 109.15
excl. VAT€ 105,92 Change foreign currency £ 91.73

0 %  (0)
Reversible top jaw for wedge bar three-jaw chucks DURO, Rhoem
Detail 4019208023XXX
From € 324,73 Change foreign currency £ 281.21
excl. VAT€ 272,88 Change foreign currency £ 236.31

0 %  (0)
Ungraded top jaw for wedge bar three-jaw lathe chuck
Detail 4019208023YYY
From € 73,70 Change foreign currency £ 63.82
excl. VAT€ 61,93 Change foreign currency £ 53.63

0 %  (0)
Base jaw with fixing screws For Chucks, Set: 3 parts
Detail 4019208023ZZZ
From € 388,81 Change foreign currency £ 336.71
excl. VAT€ 326,73 Change foreign currency £ 282.95

0 %  (0)
Three-jaw lathe foot, Ø: 100-315 mm, DIN6350, RÖHM
Detail 401920802xxxx
From € 1.422,37 Change foreign currency £ 1,231.77
excl. VAT€ 1.195,27 Change foreign currency £ 1,035.10

0 %  (0)
Three-jaw lathe chucks, Ø: 100-315 mm, ZG No. 315/415, RÖHM.
Detail 401920802yyyy
From € 1.067,88 Change foreign currency £ 924.79
excl. VAT€ 897,38 Change foreign currency £ 777.13

0 %  (0)
Four-jaw lathe chuck, size A: 80- 500 mm, DIN 6350, steel-ZS
Detail 40192080vvvvv
From € 1.096,54 Change foreign currency £ 949.60
excl. VAT€ 921,46 Change foreign currency £ 797.98

0 %  (0)
Revolving tube center, stump, size: 172-175, Rhoem
Detail 40192080WWWWW
From € 578,59 Change foreign currency £ 501.06
excl. VAT€ 486,21 Change foreign currency £ 421.06

0 %  (0)
Mounting screw for three-jaw lathe chuck DURO, Rhoem
Detail 40192080xxxxx
From € 4,75 Change foreign currency £ 4.11
excl. VAT€ 3,99 Change foreign currency £ 3.46

0 %  (0)
Quick change rotary tool holder Type: D, ORIGINAL MULTISUISSE
Detail 43321632397xx
From € 92,43 Change foreign currency £ 80.04
excl. VAT€ 77,67 Change foreign currency £ 67.26

0 %  (0)
Quick-Bar holder, type: H, ORIGINAL MULTISUISSE
Detail 43321632397yy
From € 100,10 Change foreign currency £ 86.69
excl. VAT€ 84,12 Change foreign currency £ 72.85

0 %  (0)
Sleeve with morse taper, MK: 1-4, OD: 30-50 mm, MULTISUISSE
Detail 43321632398xx
From € 132,40 Change foreign currency £ 114.66
excl. VAT€ 111,26 Change foreign currency £ 96.35

0 %  (0)
Quick change Parting tool, type: T, ORIGINAL MULTISUISSE
Detail 43321632400xx
From € 162,13 Change foreign currency £ 140.40
excl. VAT€ 136,24 Change foreign currency £ 117.98

0 %  (0)
Höhenverstellschraube- / nut for quick change tool holders
Detail 4332163240xxx
From € 4,03 Change foreign currency £ 3.49
excl. VAT€ 3,39 Change foreign currency £ 2.94

0 %  (0)
Prism pair - with clamp - cured - accuracy 0.004 mm
Detail 945014020xxx
From € 85,09 Change foreign currency £ 73.68
excl. VAT€ 71,50 Change foreign currency £ 61.92

0 %  (0)
Angle Plates - with 2 T-slots - DIN 876/1 - cast iron - grinded
Detail 945017130xxx
From € 219,80 Change foreign currency £ 190.35
excl. VAT€ 184,71 Change foreign currency £ 159.96

0 %  (0)
Quick-change head for lathes, type: A, B, C, MultiSuisse
Detail 43321632396XX
From € 349,50 Change foreign currency £ 302.67
excl. VAT€ 293,70 Change foreign currency £ 254.34

0 %  (0)
Revolving center, taper: MK1-MK5, angle: 60 °, FORUM
Detail 4317784839xxx
From € 157,65 Change foreign currency £ 136.53
excl. VAT€ 132,48 Change foreign currency £ 114.73

0 %  (0)
Support member 7500T, Size = Clamping force: 16-25 kN, AMF
Detail 4020772yyyyyy
From € 90,18 Change foreign currency £ 78.09
excl. VAT€ 75,78 Change foreign currency £ 65.63

0 %  (0)
Four-jaw lathe chuck, size A: 100-400 mm, ZS, RÖHM
Detail 40192080yyyyy
From € 1.092,38 Change foreign currency £ 946.00
excl. VAT€ 917,97 Change foreign currency £ 794.96

0 %  (0)
Rohflansch For Chucks: DURO, with cylindrical receptacle
Detail 40192080ZZZZZ
From € 103,17 Change foreign currency £ 89.35
excl. VAT€ 86,70 Change foreign currency £ 75.08

0 %  (0)
Wedge-bar three-jaw chucks, DIN 55029, T DURO, Rhoem
Detail 4019208228XXX
From € 5.950,52 Change foreign currency £ 5,153.15
excl. VAT€ 5.000,44 Change foreign currency £ 4,330.38

0 %  (0)
Wedge-bar three-jaw chucks - DIN55027 - Duro T - Rhoem
Detail 401920822YYYY
From € 4.571,78 Change foreign currency £ 3,959.16
excl. VAT€ 3.841,83 Change foreign currency £ 3,327.02

0 %  (0)
Mounting screw for top jaws, RÖHM
Detail 4019208XXXXXX
From € 3,56 Change foreign currency £ 3.08
excl. VAT€ 2,99 Change foreign currency £ 2.59

0 %  (0)
Chucks key length: 80-320mm, square, special steel, AMF
Detail 4020772041XXX
From € 14,30 Change foreign currency £ 12.39
excl. VAT€ 12,02 Change foreign currency £ 10.41

0 %  (0)
Chucks key length: 80-320mm, outer square, special steel, AMF
Detail 4020772042XXX
From € 16,27 Change foreign currency £ 14.09
excl. VAT€ 13,67 Change foreign currency £ 11.84

0 %  (0)
Intermediate element 7500Z, clamping force up to 25 kN, AMF
Detail 4020772074xxx
From € 176,81 Change foreign currency £ 153.12
excl. VAT€ 148,58 Change foreign currency £ 128.67

0 %  (0)
Mounting kit for intermediate element 7500BZ - AMF
Detail 4020772075xxx
From € 18,22 Change foreign currency £ 15.78
excl. VAT€ 15,31 Change foreign currency £ 13.26

0 %  (0)
Adapter member 7500A-25 M18 AMF
Detail 40207720797xx
From € 56,19 Change foreign currency £ 48.66
excl. VAT€ 47,22 Change foreign currency £ 40.89

0 %  (0)
Turnbuckles set 7500SP, Size = Clamping force: 16-25 mm
Detail 4020772abcdef
From € 54,62 Change foreign currency £ 47.30
excl. VAT€ 45,90 Change foreign currency £ 39.75

0 %  (0)
Mounting kit 7500BF - Size = clamping force 16-25 kN - AMF
Detail 4020772bcdefg
From € 10,45 Change foreign currency £ 9.05
excl. VAT€ 8,78 Change foreign currency £ 7.60



Wedge-bar three-jaw chucks, DIN 55029, T DURO, Rhoem






Shopping Cart / Inquiry List

Your shopping cart is empty

Contact

Contact us!
DE Contact form
Tel.: (040) 731 036-0
Fax: (040) 731 036-50

Delete
Last Considered