Ball valve - nickel-plated brass - electr. Drive (sanitary version) - IG G 1/4 "to G 2" - DN 10 to 50 - PN -0.9 to 40
€ 409,56 |
Price incl. VAT |
Ex stock within 4 days deliverable
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
851934230110
Type
Thread | G 3/4 " |
Nominal-Ø | 20th |
Installation Length | 76 mm |
Voltage | 85 to 240 V AC / DC |
16 sec. | |
-0.9 to 40 bar | |
1-F 03 |
Product Description
- The ball valve is equipped with an electric swivel drive and is ideally suited for the passage of water, compressed air, oils, fuels, heating oil, solvents, paints, varnishes, weak acids and alkalis as well as for use under vacuum .
- The housing is made of nickel-plated brass, the ball is made of hard chrome-plated brass. The ball valve is provided with seals made of Teflon and fluororubber.
- The actuator is equipped with an optical position indicator and has two additional limit switches for further control tasks as well as a manual override. The electronic torque limiter prevents damage in the event of overload.
- The motor can be operated in both DC and AC voltage. A heater is integrated in the drive housing.
- Attention: The ball valve must not be used upside down!
- Housing material - nickel-plated brass
- Material ball - hard chrome-plated brass
- Material seal - PTFE / FKM
- Nominal size - 10 to 50
- Connection thread (IG) - G 1/4 "to G 2"
- Installation length - 64 to 121 mm
- Voltage - 24 V AC / DC or 85 to 240 V AC / DC
- Degree of protection - IP 65
- Duty cycle - 75%
- Positioning time - 16 to 19 sec.
- Working pressure - -0.9 to 40 bar
- max.switchable pressure differential - 16 bar
- Media temperature - -20 to max. +95 Â ° C
- Ambient temperature - -20 to max. +70 Â ° C
Versions: (10)
Narrow down your selection
Thread
Nominal-Ø
Installation Length
Voltage
Ratings
No evaluation has been given