- The Aerodynamically shaped blower channel makes it possible to reach an twice higher outlet velocity of the sandblasting material air mix than the cylindrical type.
- Air and Sandblasting consumption are lightly increasing
- The impact velocity decides
the removal rate and therefore about the area capacity which
is raised up to 40%
Important Informations to the Sandblasting results
Good Sandblasting results are depending from the air pressure and the air amount on the nozzle.
Therefore the compressed air is very important.
i Steel constructions reach the best results at a air pressure of 6-7 bar, Stone and Concrete a pressure of 3-4 bar is recommended.
Air amount on the nozzle is also very important.
The following tablet should help in finding the right compressor and nozzle type.
Sanblast Material Consumption per hour and Air Consumption in m³ per Minute
To avoid pressure losses the compressor should be installed as close as possible to the sandblasting pot.
The Pipe profiles of the air hoses should be as large as possible to reduce a pressure loss.
Compressor must be installed in a way that no sandblasting dust
is sucked in.