Abrasive fleece - PFERD POLINOX® - made of corundum or silicon carbide - for stainless steel, titanium etc.
| € 166,67 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
658244691452
Type
| designation | PNER-MW 12506-22.2 SiC F |
| abrasive | silicon carbide |
| Dimensions (D x D) | 125 x 6 mm |
| Bore diameter | 22.23 mm |
| Particle size / design | fine / medium soft |
| Rec. number of revolutions | 4500 min-1 |
| Max. Permissible speed | 6100 min-1 |
Product Description
- The abrasive fleece allows the machining of throat seams and hard-to-reach recesses and slots made of stainless steel (INOX)
- They are suitable for use with angle grinders and fillet grinders
- The abrasive nonwoven consists of a multilayer and strongly pressed nonwoven material and is bonded with a grain-resin system
- Thanks to the binding system, it has a high removal rate and a good service life
- The abrasive consists of corundum or silicon carbide and is available in different grain sizes and designs
- "PFERDERGONOMICS®" reduces vibrations, noise and dust during operation and improves work comfort
- At a cutting speed of 30 m / s the abrasive fleece develops its best performance
- For safety reasons the max. Permissible speed can not be exceeded
- Material abrasive - corundum or silicon carbide
- Suitable for - stainless steel (INOX)
- Dimensions (D x D) - 125 x 6 to 150 x 6 mm
- Drilling diameter - 22.23 or 25.4 mm
- Grain size - G (coarse) or F (fine)
- Design - soft, medium soft, medium hard, hard
- Rec. Speed - 3800 to 4500 min-1
- Max. Permissible speed - 5100 to 6100 min-1
Versions: (11)
Narrow down your selection
designation
abrasive
Dimensions (D x D)
Bore diameter
Particle size / design
Rec. number of revolutions
Max. Permissible speed
| Article No. | designation | abrasive | Dimensions (D x D) | Bore diameter | Particle size / design | Rec. number of revolutions | Max. Permissible speed | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
658244691052 | PNER-H 12506-22.2 A F | corundum | 125 x 6 mm | 22.23 mm | fine / hard | 4500 min-1 | 6100 min-1 |
|
||||
|
|||||||||||||
|
658244691053 | PNER-H 12506-22.2 A G | corundum | 125 x 6 mm | 22.23 mm | rough / tough | 4500 min-1 | 6100 min-1 |
|
||||
|
|||||||||||||
|
658244691252 | PNER-MH 12506-22.2 A F | corundum | 125 x 6 mm | 22.23 mm | fine / medium hard | 4500 min-1 | 6100 min-1 |
|
||||
|
|||||||||||||
|
|
658244691452 | PNER-MW 12506-22.2 SiC F | silicon carbide | 125 x 6 mm | 22.23 mm | fine / medium soft | 4500 min-1 | 6100 min-1 |
|
||||
|
|||||||||||||
|
658244691453 | PNER-MW 12506-22.2 A F | corundum | 125 x 6 mm | 22.23 mm | fine / medium soft | 4500 min-1 | 6100 min-1 |
|
||||
|
|||||||||||||
|
658244691628 | PNER-MW 15003-25.4 SiC F | silicon carbide | 150 x 3 mm | 25.4 mm | fine / medium soft | 3800 min-1 | 5100 min-1 |
|
||||
|
|||||||||||||
|
658244691629 | PNER-MH 15003-25.4 SiC F | silicon carbide | 150 x 3 mm | 25.4 mm | fine / medium hard | 3800 min-1 | 5100 min-1 |
|
||||
|
|||||||||||||
|
658244691630 | PNER-H 15003-25.4 A F | corundum | 150 x 3 mm | 25.4 mm | fine / hard | 3800 min-1 | 5100 min-1 |
|
||||
|
|||||||||||||
|
658244691631 | PNER-W 15006-25.4 SiC F | silicon carbide | 150 x 6 mm | 25.4 mm | fine / soft | 3800 min-1 | 5100 min-1 |
|
||||
|
|||||||||||||
|
658244691632 | PNER-MW 15006-25.4 SiC F | silicon carbide | 150 x 6 mm | 25.4 mm | fine / medium soft | 3800 min-1 | 5100 min-1 |
|
||||
|
|||||||||||||
|
658244691633 | PNER-H 15006-25.4 A F | corundum | 150 x 6mm | 25.4 mm | fine / hard | 3800 min-1 | 5100 min-1 |
|
||||
|
|||||||||||||
Ratings
No evaluation has been given
