Item No.:
309350051000
Product Description
- The CILC150RWP agitator tank is used in the chemical industry, food and beverage industry, pharmaceutical and cosmetics sector, water and environmental technology, and in general process engineering.
- The agitator container is made of stainless steel and equipped with a propeller agitator.
- The container has a hinged lid, central crossbar with 2 hinged lid halves with clamping function (can be locked in the open position).
- Metal grates are screwed underneath the hinged lid as protection against reaching in, but they can be removed.
- The cone base is equipped with a central outlet and a DN50 DIN11851 pipe extending to the front.
- There is a DN50 DIN11851 outlet fitting/ball valve with EPDM/PTFE seal.
- EPDM/PTFE.
- Brand new stainless steel agitator tank with propeller agitator
- Volume - 510 L
- Dimensions approx. Ø 790 mm x cylindrical height 1000 mm
- Total height – approx. 1400 mm (plus agitator motor)
- Material – 1.4301 V2A stainless steel
- Surface - interior BA (IIId), exterior satin finish
- Weld seams in the container pickled, passivated and brushed
- Vertical design on three feet
- Top cover – hinged lid, central crossbar with 2 hinged lid halves with clamping function (can be locked in open position)
- Sheet metal grates underneath the hinged lid as anti-grease protection, screwed in place, removable
- Subfloor – conical base with central outlet and forward-facing DN50 DIN11851 pipe
- Outlet fitting Ball valve DN50 DIN11851, EPDM/PTFE seal
- Agitator flange on the top plate
- 1x spare connection DN50 DIN11851 on the upper floor with blind cap
- Type plate
- Agitator
- Propeller agitator for low-viscosity media
- Type - SRT8-1500
- Power - 0.75 kW
- Speed - 1410 rpm
- Voltage - 3PH 400V
- Solid stirring shaft attached to the agitator motor, non-removable
- Stirrer shaft balanced for concentricity in the speed range
- 1 x 3-blade mixing propeller Ø 150 mm at the end of the agitator shaft
- - Mixing propeller made of cast stainless steel, highly polished
- Stainless steel flange, V-ring seal, EPDM
- Agitator control – CEE plug switch on the container with phase inverter, zero voltage release and emergency stop
