Blasting gun set - for blasting carbon deposits - including hose and lance

Product Description

The blasting gun set is ideal for blasting an intake tract, combustion chambers and valves free of coking and can also be retrofitted to other systems.
In addition to the low price, the device offers the lowest air requirement. The low level of comfort due to the lack of a container is to be assessed as a disadvantage. In addition, the device is not as fast and powerful as a pressure blasting device.
For safety reasons, walnut shells must be used to blast coking.

Application

The standard blast gun is made of aluminum.
The scope of delivery includes a blasting gun, a ceramic nozzle for other blasting work, an aluminum suction pipe with a large opening, a blasting material hose with a length of approx. 1.4 m and the accessory Set0A, consisting of a plastic adapter, a small and a large round nozzle made of rubber , a large brush attachment, two jet lances and a special nozzle for inserting the jet lances.
The small round nozzle is inserted into the "EP 1309 RSA" adapter holder, but - as it is a few millimeters smaller - it has to be doubled on the edge with adhesive tape, for example. Alternatively, a socket can also be inserted.
The large round nozzle must be turned in by hand, can be pushed in as far as it will go and even then protrudes 9 mm. If a brush attachment is available, it can be removed for such an application.
One of the jet lances can be modified to a desired arc, for example.

Technical Data

Blasting gun set - for blasting carbon deposits - including hose and lance - air consumption at least 350 l / min