Burr "PFERD" - carbide - Shank Ø 6 mm - pointed arch shape
| € 70,78 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
652121000095
Type
| designation | SPG 1020/6 TOUGH |
| Perforation | TOUGH |
| overall length | 60 mm |
| Burr ø x length x d1 l2 | 10 - 20 mm |
Product Description
- the burr is suitable for rough use in industry, crafts, etc. and allows the milling close contours, working with high angles of contact and all application situations where only a limited speed available
- Application
- ogival shaped burr Clip Point
- thanks to the special cut extremely impact resistant, tooth breakage, flaking and burr breaking be minimized
- the teeth TOUGH is particularly aggressive and ensures a high stock removal
- the teeth TOUGH-S provides a high material removal with a quiet milling behavior
- a drive power of 300 to 500 W is in the upper speed range for the economic use of the burrs with a shank diameter of 6 mm is required
- to prevent accidents and premature wear should only rigid clamping systems / drives are used
- Material - Carbide
- Toothing - TOUGH TOUGH-or S
- Shape - pointed arc shaping
- Shaft diameter - 6 mm
- Total length - 60 to 65 mm
- Burr-Ø x Length d1 x l2 - 10 to 20 mm or 12 to 25 mm
- according to standard - DIN 8032
Versions: (3)
Narrow down your selection
designation
Perforation
overall length
Burr ø x length x d1 l2
| Article No. | designation | Perforation | overall length | Burr ø x length x d1 l2 | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|
|
|
652121000095 | SPG 1020/6 TOUGH | TOUGH | 60 mm | 10 - 20 mm |
|
||||
|
||||||||||
|
652121000096 | SPG 1020/6 TOUGH-S | TOUGH-S | 60 mm | 10 - 20 mm |
|
||||
|
||||||||||
|
652121000097 | SPG 1225/6 TOUGH | TOUGH | 65 mm | 12-25 mm |
|
||||
|
||||||||||
Ratings
No evaluation has been given
