Burr - PFERD - carbide - Shank Ø 8 mm - Cylindrical shape - Cut 3 PLUS and 4
| From € 64,36 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- the burr is used in the fields of industry, trade, construction, etc. and is suitable for deburring, Editing contours, chamfering and rounding edges, for milling in preparation of welds, for preparing and leveling of welds, clean the cast and to change of geometries
- he is almost universally applicable for all materials
- Application
- HM burr in rolling round shape with high cutting performance and economical due to the optimal coordination of teeth, carbide and geometry and the high life
- by the impact free work without chatter marks due to the exact concentricity reduces wear
- a drive power of 300 to 500 W is in the upper speed range for the economic use of the burrs with a shank diameter of 6 mm is required
- to prevent accidents and premature wear should only rigid clamping systems / drives are used
- Material - Carbide
- Toothing - 3 or 4 PLUS
- Shape - Cylindrical shape
- Stem diameter - 8 mm
- Total length - 60 or 65 mm
- Burr-Ø x Length d1 x l2 - 10 to 20 mm to 16 mm to 25 mm
- according to standard - DIN 8032, DIN 8033 (with teeth)
Versions: (4)
Narrow down your selection
designation
Perforation
overall length
Burr ø x length x d1 l2
| Article No. | designation | Perforation | overall length | Burr ø x length x d1 l2 | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|
|
|
652121105228 | WRC 1020/8 Z3 PLUS | 3 PLUS | 60 mm | 10 - 20 mm |
|
||||
|
||||||||||
|
652121105328 | WRC 1225/8 Z3 PLUS | 3 PLUS | 65 mm | 12-25 mm |
|
||||
|
||||||||||
|
652121105348 | WRC 1225/8 Z4 | 4 | 65 mm | 12-25 mm |
|
||||
|
||||||||||
|
652121105428 | WRC 1625/8 Z3 PLUS | 3 PLUS | 65 mm | 16 - 25 mm |
|
||||
|
||||||||||
Ratings
No evaluation has been given
