Cutting disc - PFERD - for non-ferrous metals - Hardness N - Straight Type
| From € 88,89 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- the cutting blade is suitable for the machining of tough and hard non-ferrous metals such as aluminum, copper, etc. and allows the separation of sheet metal, profiles and solid material
- it allows the use of angle grinders of all abilities
- Application
- soft and powerful cutting disc in a straight version of PFERD power line SG-ELASTIC with high separation efficiency for maximum efficiency and very long lifetime
- the abrasive corundum contains no fillers so that no undesirable residue on the workpiece remain and the surface is directly weldable
- the blade is available in different widths disc, allowing different applications
- the disc width 2.4 mm is suitable for universal separation tasks
- the disc widths 1.6 / 1.0 are suitable for fast, comfortable and low-burr cutting
- the wheel width is 2.9 mm at a high lateral stability for maximum tool life
- by "PFERDERGONOMICS®" the vibration, noise and dust is reduced in the use and operation comfort is improved
- the bond is a fiber reinforced resin bond with tissue
- the use of a large clamping flange leads to an improved lateral stability and precise disc guide (not included)
- For safety reasons, the max. permissible speed is not exceeded
- Material abrasives - Aluminum oxide A
- suitable for - non-ferrous metals
- Form - just
- Hardness - N (soft)
- Particle size - 24 to 60 (according to ISO 8486)
- Bore Diameter - 16 to 22.23 mm
- Dimensions (D x T / U H x) - 1 x 16 to 230 x 2,9 x 22,23 mm
- Max. permissible speed -. 6600-15300 min-¹
- Operating speed - 80 m / s
- EN designation - 41 - A - 24 - N - BF - 80, 41 - A - 30 - N - BF - 80, 41 - A - 46 - N - BF - 80 and 41 - A - 60 - N - BF - 80 (according to EN 12413)
Versions: (11)
Narrow down your selection
designation
Dimensions (D x T / U x H)
EN designation
grain size
Max. Max. speed
| Article No. | designation | Dimensions (D x T / U x H) | EN designation | grain size | Max. Max. speed | Price incl. VAT | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
655261339430 | EHT 100 to 1.0 A 60 N-SG ALU / 16.0 | 1 x 16 mm | 41 - A - 60 - N - BF - 80 | 60 | 15300 min-¹ |
|
|||||||||
|
||||||||||||||||
|
655261340415 | EHT 115 to 1.0 A 60 N-SG ALU / 22.23 | 1 x 22,23 mm | 41 - A - 60 - N - BF - 80 | 60 | 13300 min-¹ |
|
|||||||||
|
||||||||||||||||
|
655261340425 | EHT 115 to 1.6 A 46 N-SG ALU / 22.23 | 115 x 1.6 x 22,23 mm | 41 - A - 46 - N - BF - 80 | 46 | 13300 min-¹ |
|
|||||||||
|
||||||||||||||||
|
655261340550 | EHT 115 to 2.4 A 30 N-SG ALU / 22.23 | 115 x 2.4 x 22,23 mm | 41 - A - 30 - N - BF - 80 | 30 | 13300 min-¹ |
|
|||||||||
|
||||||||||||||||
|
655261341115 | EHT 125 to 1.0 A 60 N-SG ALU / 22.23 | 1 x 22,23 mm | 41 - A - 60 - N - BF - 80 | 60 | 12200 min-¹ |
|
|||||||||
|
||||||||||||||||
|
655261331550 | EHT 125 to 2.4 A 30 N-SG ALU / 22.23 | 125 x 2.4 x 22,23 mm | 41 - A - 30 - N - BF - 80 | 30 | 12200 min-¹ |
|
|||||||||
|
||||||||||||||||
|
655261341225 | EHT 125 to 1.6 A 46 N-SG ALU / 22.23 | 125 x 1.6 x 22,23 mm | 41 - A - 46 - N - BF - 80 | 46 | 12200 min-¹ |
|
|||||||||
|
||||||||||||||||
|
|
655261323116 | EHT 150 to 1.6 A 46 N-SG ALU / 22.23 | 150 x 1.6 x 22,23 mm | 41 - A - 46 - N - BF - 80 | 46 | 10200 min-¹ |
|
|||||||||
|
||||||||||||||||
|
655261326119 | EHT 178 to 1.6 A 46 N-SG ALU / 22.23 | 178 x 1.6 x 22.23 mm | 41 - A - 46 - N - BF - 80 | 46 | 8600 min-¹ |
|
|||||||||
|
||||||||||||||||
|
655261326323 | EHT 178 to 2.9 A 24 N-SG ALU / 22.23 | 178 x 2.9 x 22.23 mm | 41 - A - 24 - N - BF - 80 | 24 | 8600 min-¹ |
|
|||||||||
|
||||||||||||||||
|
655261328323 | EHT 230 to 2.9 A 24 N-SG ALU / 22.23 | 230 x 2.9 x 22.23 mm | 41 - A - 24 - N - BF - 80 | 24 | 6600 min-¹ |
|
|||||||||
|
||||||||||||||||
Accessories
Ratings
No evaluation has been given
