Deburring - Head Ø 90 ° - QL HSSE - FORUM
| From € 12,21 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- Deburring suitable by the excellent cutting properties for almost all materials in equal measure
- Suitable for easy and chatter-free deburring and chamfering of holes.
- FORUM deburring, 90 °, QL HSSE
- The chips are discharged by the oblique bore in the shaft direction and can not damage the reduction.
- This lowering and around the machine spindle is protected.
- Sharpening is possible simply by regrinding using a grinding pin at the cutting breast.
- With 1 cutting side, 90 °, with equally verlaufendem special relief of the cone.
- The convenient cutting geometry, a slight, peeled forming section results.
Versions: (9)
Narrow down your selection
Head Ø
total length
Shank Ø
countersunk
length
width
| Article No. | Head Ø | total length | Shank Ø | countersunk | length | width | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
4317784812191 | 10.0 mm | 46 mm | 6 mm | 2-5 mm | 55 mm | 15 mm |
|
||||
|
||||||||||||
|
|
4317784812207 | 14.0 mm | 48.5 mm | 6 mm | 5-10 mm | 198 mm | 4 mm |
|
||||
|
||||||||||||
|
|
4317784812214 | 21.0 mm | 65 mm | 10 mm | 10-15 mm | 261 mm | 4 mm |
|
||||
|
||||||||||||
|
|
4317784812221 | 27.5 mm | 85 mm | 12 mm | 15-20 mm | 91 mm | 32 mm |
|
||||
|
||||||||||||
|
|
4317784812238 | 35.0 mm | 102 mm | 15 mm | 20-25 mm | 139 mm | 55 mm |
|
||||
|
||||||||||||
|
|
4317784812245 | 44.0 mm | 115 mm | 15 mm | 25-30 mm | 126 mm | 55 mm |
|
||||
|
||||||||||||
|
|
4317784812252 | 48.0 mm | 127 mm | 15 mm | 30-35 mm | 163 mm | 83 mm |
|
||||
|
||||||||||||
|
|
4317784812269 | 53.0 mm | 136 mm | 15 mm | 35-40 mm | 139 mm | 66 mm |
|
||||
|
||||||||||||
|
|
4317784812276 | 64.0 mm | 166 mm | 20 mm | 40-50 mm | 168 mm | 78 mm |
|
||||
|
||||||||||||
Ratings
No evaluation has been given
