End mills VHM TiAlN - for steel and cast iron - extra long - DIN 6535-HA - Type
| From € 40,83 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- End mill used for milling wedge and keyways and for the universal processing
- For steel, 850N, 1000N, 1400 N, 42HRc and cast iron materials
- For large milling depths up to max. 3 x d appropriate to ensure optimal use in mold.
- With center cutting
- Cutting speed approximately 50% higher than for uncoated tools.
- Dry processing possible.
- Material - VHM TiAlN, Type N
- Cutting - 2 pieces
- Right spiral - 30 ° angle
- Unit shaft - DIN 6535-HA
Versions: (9)
Narrow down your selection
Diameter
Cutting length
Total length
Shaft Ø
| Article No. | Diameter | Cutting length | Total length | Shaft Ø | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|
|
943115347110 | 3.0 mm | 20 mm | 75 mm | 3 mm |
|
||||
|
||||||||||
|
|
943115347113 | 4.0 mm | 25 mm | 75 mm | 4 mm |
|
||||
|
||||||||||
|
|
943115347116 | 5.0 mm | 30 mm | 75 mm | 5 mm |
|
||||
|
||||||||||
|
|
943115347119 | 6.0 mm | 30 mm | 75 mm | 6 mm |
|
||||
|
||||||||||
|
|
943115347122 | 8.0 mm | 40 mm | 100 mm | 8 mm |
|
||||
|
||||||||||
|
|
943115347125 | 10.0 mm | 40 mm | 100 mm | 10 mm |
|
||||
|
||||||||||
|
|
943115347128 | 12.0 mm | 45 mm | 150 mm | 12 mm |
|
||||
|
||||||||||
|
|
943115347134 | 16.0 mm | 65 mm | 150 mm | 16 mm |
|
||||
|
||||||||||
|
|
943115347140 | 20.0 mm | 65 mm | 150 mm | 20 mm |
|
||||
|
||||||||||
Ratings
No evaluation has been given
