End mills VHMTiAlN - for INOX steel, special steels, cast iron - Type N - DIN 65
| From € 39,32 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- End mill used for milling grooves and rough, and for the universal processing. Also for trimming and finish milling applications.
- For steel, 850N, 1000N, 1400 N, 42HRc, 52HRc, special steels and Ti cast iron material
- Particularly quiet operation due to high helix angle. Compared to a 2-cut the feed is up to 50% higher.
- Cutting speed approximately 50% higher than for uncoated tools.
- Dry machining processing.
- With center cutting
- Material - VHM TiAlN, type N DIN 6527
- Cutting - 3 pieces
- Right spiral - 45 ° angle
- Shaft - HB
Versions: (9)
Narrow down your selection
Ø d1 = h 10
Cutting length l2
Total length I1
Shaft Ø d2 = h 6
| Article No. | Ø d1 = h 10 | Cutting length l2 | Total length I1 | Shaft Ø d2 = h 6 | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|
|
|
943115359013 | 3.0 mm | 7 mm | 57 mm | 6 mm |
|
||||
|
||||||||||
|
|
943115359016 | 4.0 mm | 8 mm | 57 mm | 6 mm |
|
||||
|
||||||||||
|
|
943115359019 | 5.0 mm | 10 mm | 57 mm | 6 mm |
|
||||
|
||||||||||
|
|
943115359022 | 6.0 mm | 10 mm | 57 mm | 6 mm |
|
||||
|
||||||||||
|
|
943115359028 | 8.0 mm | 16 mm | 63 mm | 8 mm |
|
||||
|
||||||||||
|
|
943115359034 | 10.0 mm | 19 mm | 72 mm | 10 mm |
|
||||
|
||||||||||
|
|
943115359037 | 12.0 mm | 22 mm | 83 mm | 12 mm |
|
||||
|
||||||||||
|
|
943115359043 | 16.0 mm | 26 mm | 92 mm | 16 mm |
|
||||
|
||||||||||
|
|
943115359049 | 20.0 mm | 32 mm | 104 mm | 20 mm |
|
||||
|
||||||||||
Ratings
No evaluation has been given
