Fan grinding wheel - PFERD - Lamella version - for pre-polish and high gloss polish
| From € 199,67 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The fan grinding wheel is suitable for the pre-polish and high-gloss polish of medium and large components, as well as for the shining and machining of very contour-rich workpieces
- Application
- A fan-shaped grinding wheel with a lamella structure, whereby the pane of the workpiece contour adapts particularly well
- The thermal load is reduced by the special design
- The hard design is suitable for pre-polishing flat surfaces
- The soft version is suitable for shining workpieces
- For a particularly fine surface, the models can be used one after the other (please use a suitable polishing paste, paste not included)
- At a cutting speed of 5 to 10 m / s, the best results are achieved with the grinding pin
- For safety reasons the max. Permissible speed can not be exceeded
- Material Abrasive Felt
- Design - soft or hard
- Dimensions (D x D) - 115 x 22 or 125 x 22 mm
- Hole diameter - 22.23 mm
- Rec. Speed - 1500 to 1650 rpm
- Max. Permissible speed - 7650 to 8350 rpm
Versions: (4)
Narrow down your selection
designation
execution
Dimensions (D x D)
Rec. number of revolutions
Max. Permissible speed
| Article No. | designation | execution | Dimensions (D x D) | Rec. number of revolutions | Max. Permissible speed | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
658344370115 | FFS 115 / 22.23 W | soft | 115 x 22 mm | 1650 min-1 | 8350 min-1 |
|
||||
|
|||||||||||
|
658344370125 | FFS 125 / 22.23 W | soft | 125 x 22 mm | 1500 min-1 | 7650 min-1 |
|
||||
|
|||||||||||
|
658344371115 | FFS 115 / 22.23H | hard | 115 x 22 mm | 1650 min-1 | 8350 min-1 |
|
||||
|
|||||||||||
|
658344371125 | FFS 125 / 22.23H | hard | 125 x 22 mm | 1500 min-1 | 7650 min-1 |
|
||||
|
|||||||||||
Ratings
No evaluation has been given
