Faster Flat-Face plug-in coupling series ST-FF - plug - galvanized steel - with flat seal - DN 5 - internal thread G 1/8 "to G 1/4" - PN to 350
| From € 18,63 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- This quick-release coupling is ideal for the construction industry and other applications where a flat-sealing system is an advantage.
- For example, the plug-in coupling is used in agriculture, construction, industry and offshore (oil & gas) vehicle and road construction.
- The plug is made of galvanised steel and has an internal thread on the connection side.
- The zinc-nickel coating ensures optimum corrosion protection.
- The plug-in couplings in this series impress with higher operating pressures than conventional ISO 16028 series.
- Thanks to the specially produced flat valve, oil loss and air pockets are prevented during the coupling process.
- The plug-in coupling has a pulse strength of up to 1 million cycles in the coupled state.
- The safety lock ensures optimum protection against unintentional uncoupling.
- The plug is interchangeable in accordance with ISO 16028.
- Housing material - galvanised steel
- Seal material - NBR & PUR
- Nominal diameter - 5
- Size - 2
- Inch - 1/8
- Connection thread (female thread) - G 1/8" to G 1/4"
- Outer Ø plug - 11.6 mm
- Plug length - 44 to 51 mm
- Width across flats - 16 to 19 mm
- max. operating pressure - 350 bar
- Flow rate at ΔP=2 bar - 12 l/min.
- Temperature range - -25 to +100 °C
- Resistance to red rust - 1000 h
- Resistance to white rust - 500 h
- Standard - ISO 16028
Versions: (2)
Narrow down your selection
Thread
Length plug
Key width
| Article No. | Thread | Length plug | Key width | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|
|
9799STFF05S1 | IG G 1/8" | 44 mm | 16 mm |
|
||||
|
|||||||||
|
|
9799STFF05S2 | IG G 1/4" with O-ring | 51 mm | 19 mm |
|
||||
|
|||||||||
Ratings
No evaluation has been given
