GEDORE red special set ELECTRICAL ENGINEERING

Product Description

The 42-piece tool set can be used for a wide range of electrical engineering tasks.

Description

Double open-end spanner: The design is in accordance with DIN 3110, ISO 3318, ISO 1085, ISO 10102.
The jaw position is 15°.
The surface is matt satin chrome-plated
VDE combination pliers: The design complies with DIN ISO 5746 and fulfils the requirements of VDE 0682 Part 201 and EN/IEC 60900.
The pliers have gripping zones for flat and round material, induction-hardened cutting edges and a 2-component handle.
VDE power diagonal cutters: The design complies with DIN ISO 5749 and fulfils the requirements of VDE 0682 Part 201 and EN/IEC 60900.
The power side cutter has a high cutting performance, a slim head shape, induction-hardened, long cutting edges and a 2-component handle.
VDE snipe nose pliers, angled: The design complies with DIN ISO 5745 and fulfils the requirements of VDE 0682 Part 201 and EN/IEC 60900.
The forged pliers have gripping surfaces angled at 45°, longitudinal teeth, induction-hardened long cutting edges and a 2-component handle.
VDE cable knife: The cable knife is VDE-insulated in accordance with DIN EN 60900, with a sturdy, partially insulated and replaceable blade, straight cutting edge, as well as a protective cap and safety handle made of impact-resistant plastic.
VDE screwdrivers slotted and Phillips PH are VDE-insulated in accordance with DIN EN 60900.
The blade is made of high-quality chrome-molybdenum steel, chrome-plated, the output tip is phosphatised
The screwdrivers have a 2-component handle, 5-sided handle head and a slotted hole in the handle.
Hex key L-wrenches: The design is in accordance with DIN ISO 2936.
The screwdriver is hardened throughout and is located in the holder.
Locksmith's hammer: The forged hammer head is made of tempered steel, the striking faces are induction-hardened.
The design is in accordance with DIN 1041.
The hammer has an ash handle and a lacquered handle end, as well as a ring wedge.
Mallet: The forged hammer head is made of tempered steel, the striking faces are induction-hardened.
The design is in accordance with DIN 6475.
The hammer has an ash handle and a lacquered handle end, as well as a ring wedge.
Flat chisel: The design is in accordance with DIN 6453.
The cutting edge and the head are ground, the striking end is tempered.
Electrician's chisel, square: The cutting edge and the head are ground, the striking end is tempered.
Pointed chisel, 8-sided: The design is in accordance with DIN 7256.
The cutting edge and the head are ground, the striking end is tempered.
Centre punch, 8-sided: The design is in accordance with DIN 7250.
The striking end is left on.
Phase tester: Designed for max. 250 volts.
The phase tester has a black burnished tip, a red plastic sheath, anti-slip protection on the handle and a plastic clip.
The design is in accordance with DIN 0680-6:1977-04. Wooden folding rule: The wooden folding rule has a metric double scale, accuracy class III and EC type approval for continuous mm graduation.
It is made of beech wood and has riveted joints.
Carbide scriber: Pencil and carbide scriber in one pencil, with straight shape and retractable needle, in metal housing, with clip-on clip.
Voltage tester: The design is in accordance with DIN ISO 0680.
The voltage tester has 8 LED displays, is suitable for DC and AC voltage measurement, protection class IP65.
Spirit level: The powder-coated spirit level has a smooth aluminium rectangular profile, two vials made of acrylic glass and a measuring accuracy of +/- 0.5 mm/m.
The end caps are shock and impact resistant.
Filler: The filler is suitable for small touch-ups/repairs.
The spatula has a wooden handle and hanging hole.
Construction pencil: The pencil has an oval shape.

Technical Data

Material double open-end spanner - chrome vanadium steel
Material VDE combination pliers - chrome vanadium steel
Material VDE diagonal cutters - chrome vanadium steel
Material hex key L-wrenches - chrome vanadium steel, phosphatised
Material electrician's chisel, square - chrome vanadium steel
Material pointed chisel, 8-sided - chrome vanadium steel
Material centre punch, 8-point - chrome vanadium steel
Material wooden folding rule - beech wood
Dimensions - 408 x 186 x 184 mm
Weight - 7 kg
Scope of delivery:
Double open-end spanner - 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 24x27 mm
Locksmith's hammer - 300 g
Mallet - 1000 g
Carbide scriber with clip - 150 mm
Centre punch - 5 mm, 120 mm
Flat chisel - 250 mm
Pointed chisel - 250 mm
Electrician's chisel - 250 mm
Voltage tester - 6-400 V AC/DC
Phase tester - 3 mm, 135 mm
Wooden folding rule - 2 m
Filler - 60 mm
DE screwdriver slotted - 2.5, 3, 4, 5.5 mm
VDE screwdriver Phillips PH - 1, 2
VDE combination pliers - 180 mm
VDE diagonal cutters - 160 mm
VDE Flat nose pliers, angled - 200 mm
VDE cable knife - 185 mm,
Hex key L-wrench set, 9 pcs - 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm
Spirit level - 300 mm
Construction pencil - 175 mm

GEDORE red special set ELECTRICAL ENGINEERING - 42 parts