GEDORE red tool set - in foam modules

Product Description

The 119-piece tool set offers professional tools for a wide range of applications.

Description

The 2C reversible ratchet, 1/4 inch, is manufactured in accordance with DIN 3120 - A 6.3, ISO 1174. The clockwise/anticlockwise rotation can be switched by a lever, push-button release, fine-toothed, oval head, 2-component handle.
The square socket handle, 1/4 inch, has a 1-component handle with square socket.
The socket, 1/4 inch, hexagonal, is metric, short, the design is manufactured in accordance with DIN 3124, ISO 2725.
The screwdriver bit, 1/4 inch, is suitable for hexagon socket screws and has a pressed-in, phosphatised pin.
The screwdriver bits, 1/4 inch, slotted, PH, PZ, TX with hole have a pressed-in, phosphatised pin.
Socket spanner extension 1/4 inch.
The cross handle with sliding piece, 1/4 inch, is manufactured in accordance with DIN 3122, ISO 3315.
The universal joint, 1/4 inch is screwed, the design is manufactured according to DIN 3123 - C 6.3.
The 2C reversible ratchet, 1/2 inch is manufactured in accordance with DIN 3120 - A 12.5, ISO 1174. The clockwise/anticlockwise rotation can be switched by a lever, push-button release, fine-toothed, oval head, 2-component handle.
Socket spanner extension 1/2 inch.
The cross handle, 1/2 inch, with sliding piece is manufactured in accordance with DIN 3122, ISO 3315.
The universal joint 1/2 inch is bolted, the design is manufactured according to DIN 3123 - C 12.5.
The socket, hexagonal, is metric, short, the design is manufactured in accordance with DIN 3124, ISO 2725.
The screwdriver bit, 1/2 inch, is suitable for hexagon socket screws and has a pressed-in, phosphatised pin.
The combination spanner is manufactured in accordance with DIN 3113, form A, ISO 3318, ISO 7738. The ring side is angled by 15°, the jaw position is 15°. The surface is matt satin chrome-plated.
The offset screwdriver set is manufactured in accordance with DIN ISO 2936, fully hardened and phosphatised.
The water pump pliers are 7-way adjustable, manufactured in accordance with DIN 8976 Form C and have longitudinally serrated gripping surfaces with a box joint.
The combination pliers are forged, manufactured in accordance with DIN ISO 5746, have induction-hardened cutting edges and a 2-component handle.
The round nose pliers are manufactured in accordance with DIN ISO 5745, have straight gripping surfaces, longitudinal serration, induction-hardened cutting edges and a 2-component handle.
The diagonal cutters are forged, manufactured in accordance with DIN ISO 5749, have a slim head shape, induction-hardened, long cutting edges and a 2-component handle.
The locksmith's hammer has a forged hammer head made of tempered steel. The striking surfaces are induction-hardened and the design is manufactured in accordance with DIN 1041. The ash handle has a lacquered handle end and ring wedge.
The flat chisel, flat oval, is manufactured in accordance with DIN 6453. The cutting edge and head are ground, the striking end is tempered.
The cross chisel, flat oval, is manufactured in accordance with DIN 6451. The cutting edge, sides and head are ground, the striking end is tempered.
The 8-edged punch is manufactured in accordance with DIN 6458, the striking end is tempered.
The centre punch, 8-sided, is manufactured in accordance with DIN 7250, the striking end is tempered.
The pin punch, 8-sided, is manufactured in accordance with DIN 6450. The striking end is tempered.
The 2C screwdrivers slotted, PH and TX are manufactured in accordance with DIN. The blade is made of high-quality chrome-molybdenum steel, chrome-plated, the drive tip is phosphatised. The screwdrivers have a 2-component handle, a 5-sided handle head and a slotted hole in the handle.
The roller tape measure has an ABS 2-component housing, with clip, nylon-coated measuring tape, mm graduation, with tape retraction and tape lock, with magnetic stop and is in accuracy class II.
The cutter knife has a plastic housing, the blade guide is made of metal, one-handed operation, with 5 spare blades.

Technical Data

Connection square to DIN 3120, ISO 1174, with ball lock
Square drive to DIN 3120, ISO 1174, with ball catch groove
Material socket spanner tools - chrome vanadium steel, matt satin chrome-plated
Material offset screwdriver, flat chisel, cross chisel, punch, centre punch, pin punch - chrome vanadium steel
Material water pump pliers - chrome vanadium steel, powder-coated
Pliers set - in 1/3 in foam module
Socket spanner set 1/4" - in 1/3 in foam module
Socket spanner set 1/2" - in 1/3 in foam module
Screwdriver set - in 1/3 in foam module
Hammer and chisel set - in 1/3 in foam module
Ratchet with accessories 1/2" - in 1/3 in the foam module Screwdriver set - in 1/3 in the foam module
Combination spanner set and offset screwdriver - in 2/3 in foam module
Cutter knife blade length - 25 mm (with 5 spare blades)
Rolling tape measure - 3000 mm
Dimensions - 510 x 270 x 350 mm
Weight - 14 kg

GEDORE red tool set - in foam modules - 119-piece