GEDORE red tool set - in foam modules

Product Description

The 129-piece tool set offers comprehensive equipment for a variety of repair and craft work.

Application

Socket extension 1/4 inch and 1/2 inch.
The square handle 1/4 inch has a 1-component handle, with inside square.
The adjustable spanner has a jaw position of 15 °, the head is polished with a lasered scale.
The grains, 8-edge, are manufactured in accordance with DIN 7250. The beating is tempered.
The driver, 8-edge is manufactured according to DIN 6458. The beating is tempered.
The pin punch, 8-edge, is manufactured according to DIN 6450. The beating is tempered.
The cross handle with slider, 1/4 inch and 1/2 inch, is manufactured in accordance with DIN 3122, ISO 3315.
Screwdriver bit 1/4 inch, slot, PH, PZ, TX with hole, are with pressed, phosphated pin.
The 2-component handle ensures a hand-friendly power transmission and is suitable for socket wrench inserts.
The universal joint has 1/4 inch and 1/2 inch. The joint is screwed. The design is manufactured according to DIN 3123 - C 12.5.
The flat chisel is manufactured according to DIN 6453. Cutting edge and head are ground, the beating end is tempered.
The 1/4-inch and 1/2-inch screwdriver bits are suitable for hexagon socket screws, with pressed, phosphated pin.
The socket inserts 1/4 inch and 1/2 inch, hexagon are metric in short and long version according to DIN 3124, ISO 2725 manufactured.
The chisel is manufactured according to DIN 6451. Cutting edge, sides and head are ground, the beating end is tempered.
The 2K reversible ratchet 1/4 inch and 1/2 inch, has a clockwise / anticlockwise rotation, can be switched by a lever, push-button release, fine-toothed, oval head.
The spark plug insert 1/2 inch with pressed-in retaining rubber, spark plug insert 1/2 inch with pressed-in retaining rubber and additional drive hexagon SW 24.
The locksmith's hammer is manufactured according to DIN 1041 and has inductively hardened striking surfaces. The ash handle has a painted stem end and ring wedge.
The water pump pliers are manufactured in accordance with DIN 8976 Form C, has serrated gripping surfaces with plugged-through industry and is 7-way adjustable.
The side cutter is manufactured in accordance with DIN ISO 5749 and has a slim head shape, inductively hardened, long cutting edges and a 2-component handle.
The double open-end wrench is manufactured according to DIN 3110, ISO 3318, ISO 1085, ISO 10102. The mouth position is 15 °. The surface is matt satin chrome.
The flat nose pliers, straight, are manufactured according to DIN ISO 5745 and have straight gripping surfaces, serrated, inductively hardened cutting edges and a 2-component handle.
The combination pliers are manufactured according to DIN ISO 5746 and have gripping zones for flat and round material, inductively hardened cutting edges and a 2-component handle.
The socket wrench tools have a connection square according to DIN 3120, ISO 1174, with ball lock and also a square drive according to DIN 3120, ISO 1174, with ball catch groove.
The 2K screwdriver, TX, has a 2-component handle, a 5-edge handle head, a slot in the handle, and a blade made of high-quality chromium-molybdenum steel, chrome-plated. The output tip is phosphated.
The ring ratchet wrench is manufactured in accordance with DIN 3113, ISO 3318 and has a straight shape. The ratchet mechanism has 72 teeth. The back swing angle is 5 °, the jaw position is 15 °. The surface is matt satin chrome.
The 2K screwdrivers, slot and Phillips PH, are manufactured according to DIN. The blade is made of high-quality chromium-molybdenum steel, chrome-plated, the output tip is phosphated. The screwdrivers have a 2-component handle, a 5-edge handle head and a slot in the handle.

Technical Data

Material adjustable spanner - chrome vanadium steel, matt satin chrome
Material ring ratchet wrench, double open-end wrench, round nose pliers, combination pliers, side cutters, chisels, punch drivers, pin punch - chrome vanadium steel
Material water pump pliers - chrome vanadium steel, powder-coated
Socket set 1/4 "+ 1/2" and accessories - in 3/3 foam module
Material adjustable spanner - chrome vanadium steel, matt satin finish
1/4 "2K lever reversible ratchet - fine toothed, 72 teeth, 150 mm
1/4 "square handle - 165 mm
1/4 "socket wrench hexagon SW - 4, 4,5, 5, 5,5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
1/4 "socket wrench hexagon SW - 4, 4,5, 5, 5,5, 6, 7, 8, 9, 10, 11, 12, 13, 50 mm mm
1/4 "screwdriver bit inside hexagon - 3, 4, 5, 6, 8, 10, 37 mm
1/4 "screwdriver bit slot - 5.5, 6.5, 37 mm
1/4 "Phillips insert Phillips PH - 1, 2, 3, 37 mm
1/4 "screwdriver bit Phillips PZ - 1, 2, 37 mm
1/4 "screwdriver bit TX with hole - T10, T15, T20, T25, T27, T30, T40, 37 mm
1/4 "socket wrench extension - 100 mm
1/4 "T-handle with slider - 115 mm
1/4 "universal joint - 32 mm
1/2 "2K lever reversible ratchet - fine toothed 72 teeth 250 mm
1/2 "socket wrench hexagon SW - 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 28, 30, 32
1/2 "screwdriver bit inside hexagon - 6, 7, 8, 9, 10, 12, 14, 55 mm
1/2 "spark plug insert SW 16 - 21 mm, 65 mm
1/2 "socket wrench extension - 125, 250 mm
1/2 "T-handle with slider - 250 mm
1/2 "Cardan joint - 66 mm
Adjustable wrench, adjustable 8 "- 200 mm
Screwdriver, pliers, hammer, chisel set - in 3/3 foam module
Combination pliers - 180 mm
Side cutter - 160 mm
Round nose pliers, straight - 200 mm
Screwdriver slot - 3, 4, 5.5, 6.5 mm
Screwdriver Phillips PH - 1, 2
Screwdriver TX - T10, T15, T20, T25, T30, T40 Waterpump Pliers - 10 ", 250 mm
Repairman hammer - 300 g
Flat chisel - 125 mm, 150 mm
Cross Chisel - 125 mm
Grains - 4 mm, 120 mm
Pin punch - 4 mm, 120 mm
Threader - 3 mm, 150 mm
Ring ratchet, double combination wrench set - in 3/3 foam module
Ring ratcheting wrench SW - 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22 mm
Double open-end wrench SW - 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22 mm
Dimensions - 590 x 590 x 250 mm
Weight - 13.6 kg

GEDORE red tool set - in foam modules - 129 pieces