Grinding fleece - PFERD POLINOX® - made of corundum or silicon carbide - for titanium and stainless steel
|
€ 82,44 (€ 8,24 / Piece)
|
| Price incl. VAT |
Ex stock within 4 days deliverable
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
658244691202
Type
| designation | PNER-MH 2525-6 A F |
| abrasive | corundum |
| Dimensions (D x D) | 25 x 25 mm |
| Bore diameter | 6 mm |
| Particle size / design | fine / medium hard |
| Rec. number of revolutions | 19000 min-1 |
| Max. Permissible speed | 30500 min-1 |
Product Description
- The abrasive fleece is suitable for machining small surfaces made of stainless steel (INOX) or titanium
- With a diameter of 150 mm, it is suitable, in addition to reworking on grinding blocks, e.g. Of surgical instruments
- The abrasive fleece was developed for use on straight grinders and bending shafts
- Application
- The abrasive nonwoven consists of a multilayer and strongly pressed nonwoven material and is bonded with a grain-resin system
- Thanks to the binding system, it has a high removal rate and a good service life
- The abrasive consists of corundum or silicon carbide and is available in different grain sizes and designs
- "PFERDERGONOMICS®" reduces vibrations, noise and dust during operation and improves work comfort
- The 150 mm diameter sanding web has an adapter for reducing the drill diameter from 25.4 to 20 mm
- At a cutting speed of 15 to 35 m / s it develops its best performance
- For safety reasons the max. Permissible speed can not be exceeded
- Material abrasive - corundum or silicon carbide
- Suitable for - stainless steel (INOX), titanium
- Dimensions (D x D) - 25 x 25 to 150 x 25 mm
- Drilling diameter - 6 or 25.4 mm
- Grain size - G (coarse) or F (fine)
- Design - soft, medium soft, medium hard, hard
- Rec. Speed - 3200 to 19000 min-1
- Max. Permissible speed - 5100 to 30500 min-1
Versions: (22)
Narrow down your selection
designation
abrasive
Dimensions (D x D)
Bore diameter
Particle size / design
Rec. number of revolutions
Max. Permissible speed
| Article No. | designation | abrasive | Dimensions (D x D) | Bore diameter | Particle size / design | Rec. number of revolutions | Max. Permissible speed | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
658244691202 | PNER-MH 2525-6 A F | corundum | 25 x 25 mm | 6 mm | fine / medium hard | 19000 min-1 | 30500 min-1 |
|
||||
|
|||||||||||||
|
|
658244691001 | PNER-H 2525-6 A G | corundum | 25 x 25 mm | 6 mm | rough / tough | 19000 min-1 | 30500 min-1 |
|
||||
|
|||||||||||||
|
|
658244691002 | PNER-H 2525-6 A F | corundum | 25 x 25 mm | 6 mm | fine / hard | 19000 min-1 | 30500 min-1 |
|
||||
|
|||||||||||||
|
|
658244691005 | PNER-H 5003-6 A F | corundum | 50 x 3 mm | 6 mm | fine / hard | 9500 min-1 | 15300 min-1 |
|
||||
|
|||||||||||||
|
|
658244691621 | PNER-W 7506-6 A G | corundum | 75 x 6 mm | 6 mm | coarse / soft | 6400 min-1 | 10200 min-1 |
|
||||
|
|||||||||||||
|
|
658244691627 | PNER-W 7506-6 SiC F | silicon carbide | 75 x 6 mm | 6 mm | fine / soft | 6400 min-1 | 10200 min-1 |
|
||||
|
|||||||||||||
|
|
658244691010 | PNER-H 7503-6 A F | corundum | 75 x 3 mm | 6 mm | fine / hard | 6400 min-1 | 10200 min-1 |
|
||||
|
|||||||||||||
|
|
658244691422 | PNER-MW 7506-6 A F | corundum | 75 x 6 mm | 6 mm | fine / medium soft | 6400 min-1 | 10200 min-1 |
|
||||
|
|||||||||||||
|
|
658244691427 | PNER-MW 7506-6 SiC F | silicon carbide | 75 x 6 mm | 6 mm | fine / medium soft | 6400 min-1 | 10200 min-1 |
|
||||
|
|||||||||||||
|
|
658244691222 | PNER-MH 7506-6 A F | corundum | 75 x 6 mm | 6 mm | fine / medium hard | 6400 min-1 | 10200 min-1 |
|
||||
|
|||||||||||||
|
|
658244691021 | PNER-H 7506-6 A G | corundum | 75 x 6 mm | 6 mm | rough / tough | 6400 min-1 | 10200 min-1 |
|
||||
|
|||||||||||||
|
|
658244691641 | PNER-W 7513-6 A G | corundum | 75 x 13 mm | 6 mm | coarse / soft | 6400 min-1 | 10200 min-1 |
|
||||
|
|||||||||||||
|
|
658244691647 | PNER-W 7513-6 SiC F | silicon carbide | 75 x 13 mm | 6 mm | fine / soft | 6400 min-1 | 10200 min-1 |
|
||||
|
|||||||||||||
|
|
658244691442 | PNER-MW 7513-6 A F | corundum | 75 x 13 mm | 6 mm | fine / medium soft | 6400 min-1 | 10200 min-1 |
|
||||
|
|||||||||||||
|
|
658244691447 | PNER-MW 7513-6 SiC F | silicon carbide | 75 x 13 mm | 6 mm | fine / medium soft | 6400 min-1 | 10200 min-1 |
|
||||
|
|||||||||||||
|
|
658244691242 | PNER-MH 7513-6 A F | corundum | 75 x 13 mm | 6 mm | fine / medium hard | 6400 min-1 | 10200 min-1 |
|
||||
|
|||||||||||||
|
|
658244691041 | PNER-H 7513-6 A G | corundum | 75 x 13 mm | 6 mm | rough / tough | 6400 min-1 | 10200 min-1 |
|
||||
|
|||||||||||||
|
|
658244691667 | PNER-W 15025-25.4 SiC F | silicon carbide | 150 x 25 mm | 25.4 mm | fine / soft | 3200 min-1 | 5100 min-1 |
|
||||
|
|||||||||||||
|
|
658244691462 | PNER-MW 15025-25.4 A F | corundum | 150 x 25 mm | 25.4 mm | fine / medium soft | 3200 min-1 | 5100 min-1 |
|
||||
|
|||||||||||||
|
|
658244691467 | PNER-MW 15025-25.4 SiC F | silicon carbide | 150 x 25 mm | 25.4 mm | fine / medium soft | 3200 min-1 | 5100 min-1 |
|
||||
|
|||||||||||||
|
|
658244691262 | PNER-MH 15025-25.4 A F | corundum | 150 x 25 mm | 25.4 mm | fine / medium hard | 3200 min-1 | 5100 min-1 |
|
||||
|
|||||||||||||
|
|
658244691061 | PNER-H 15025-25.4 A G | corundum | 150 x 25 mm | 25.4 mm | rough / tough | 3200 min-1 | 5100 min-1 |
|
||||
|
|||||||||||||
Accessories
Ratings
No evaluation has been given
