Item No.:
9820658244691627
Product Description
- the abrasive fleece is suitable for processing small surfaces made of stainless steel (INOX) or titanium
- with a diameter of 150 mm, it is also suitable for reworking on grinding blocks, e.g. for surgical instruments
- the abrasive fleece was developed for use on straight grinders and flexible shafts
- the abrasive fleece consists of a multi-layered and highly compressed fleece material and is bonded with a grain-resin system
- due to the bonding system, it has a high removal rate and a good service life
- the abrasive is made of aluminium oxide or silicon carbide and is available in different grit sizes and designs
- pFERDERGONOMICS®" reduces vibration, noise and dust generation during use and improves working comfort
- an adapter for reducing the drill diameter from 25.4 to 20 mm is included with the abrasive fleece with a diameter of 150 mm
- it develops its best performance at a cutting speed of 15 to 35 m/s
- for safety reasons, the maximum permissible speed must not be exceeded
- Abrasive - corundum or silicon carbide
- suitable for - stainless steel (INOX), titanium
- Designation - PNER-W 7506-6 SiC F
- Abrasives - Silicon carbide
- Dimensions (D x D) - 75 x 6 mm
- Bore Ø - 6 mm
- Grit size/finish - fine/soft
- recomm. Speed - 6400 min-¹
- max. permissible speed - 10200 min-¹
