Grinding roller - PFERD POLIROLL® - Cylindrical shape - with ceramic grain - for hard materials - price per piece
Grinding roller - PFERD POLIROLL® - Cylindrical shape - with ceramic grain - for hard materials - price per piece
Product Description
The grinding wheel is used for grinding hard and poorly heat-conducting materials
They are particularly suitable for deburring boreholes and hard-to-reach areas, for machining fillet welds in the field of metal construction and for deburring cast iron
Description
the cylindrical abrasive roll consists of a helically wound abrasive on a resin-coated, tensile base
it has an aggressive grinding behavior, after the wear of the outer abrasive fabric comes due to the structure again fresh abrasive grain used
The ceramic grain abrasive contains additives that are abrasive-active, which significantly increase the removal rate, prevent clogging and produce a cooler finish
In order to prevent damage to the bond due to heat development, the sanding roller should only be used with the tip
To increase the service life and the grinding performance, a suitable grinding oil should be used
for safety reasons, the max. permissible speed can not be exceeded
Technical Data
Material abrasive - ceramic grain
suitable for - hard, poorly heat-conductive material
Version - cylindrical shape
Grain size - 60 to 120
Dimensions (D x D) - 6 x 25 to 12 x 35 mm
Rec. Speed - 12000 to 20000 min-1
Max. permissible speed - 17000 to 25000 min-1
Max. permissible peripheral speed - 11 m / s
for tool holders - BO 3-18-3, BO 6-18-3, BO 6-24-3
