Item No.:
947700636029
Product Description
- Thanks to its compact size and light weight, the Kemppi Minarc M 223 AUTO GM welding machine is the ideal tool for mobile MIG welding.
- The Minarc M 223 AUTO GM can be connected to the mains supply and to generators, making it ideal for use on building sites.
- The Minarc M 223 AUTO GM welding machine offers precise welding quality and arc ignition.
- It can be used with Fe, Fe-MC/FC, stainless steel (Ss), Al, CuSi, flux-cored wires and gasless cored wires.
- The Minarc M 223 AUTO GM features manual settings, with separate controls for voltage and wire feed speed.
- The user interface is operated via a large graphic display.
- The machine can be connected to the mains supply and to generators, and has five memory channels.
- A welding torch, a 3-metre cable set and a carrying strap are included in the scope of delivery.
- Mains voltage – 220 to 240 V ±10 %
- Mains supply voltage (low-range MV) – 110 to 120 V ±10 %
- Mains connection phases – 1~50/60 Hz
- Type of mains lead – 3G, H07RN-F
- Mains lead size – 2.5 mm²
- Maximum rated input power [S1max] – 7 kVA
- Mains fuse – 16 A
- Mains fuse (@MV at low range) – 15 A
- Idle power consumption [P1idle] – 10 W
- Power, duty cycle % at maximum rated current, MIG – 20 %
- Performance at +40 °C, max. rated current, MIG – 220 A
- Performance at +40 °C, 60% MIG – 160 A
- Output at +40 °C, 100% MIG – 140 A
- Power, duty cycle % at maximum rated current, MIG (@MV in the low range) – 20 %
- Performance at +40 °C, max. rated current, MIG (at low MV) – 120 A
- Output at +40 °C, 60% MIG (@MV in the low range) - 95 A
- Output at +40 °C, 100% MIG (@MV in the low range) – 75 A
- Power range, MIG – 15 A / 11 V to 220 A / 28 V
- Power range, MIG (@MV in the low range) – 15 A / 11 V to 120 A / 23 V
- Voltage adjustment range, MIG – 10 to 32 V
- Power factor at maximum rated current – 1 λ
- Efficiency at maximum rated current [η] – 85 %
- EMC Class - A
- Type of welding connection – Built-in
- Wire feed mechanism – single-motor, 2 rollers
- Diameter of the feed rollers – 30 mm
- Filler wire diameter, Fe – 0.6 to 1.2 mm
- Filled wire diameter, Fe-MC/FC – 1 to 1.2 mm
- Filler wire diameter, Ss – 0.6 to 1 mm
- Filler wire diameter, Al – 0.8 to 1.2 mm
- Wire feed speed – 0.5 to 18 m/min
- Maximum weight of the wire spool – 5 kg
- Maximum diameter of the wire spool – 200 mm
- Operating temperature: -20 to 40 °C
- Storage temperature – –40 to 60 °C
- Recommended minimum generator power [Sgen] – 8 kVA
- Protection class (when fully installed) – IP23
- Standards – IEC 60974-1, -10
- Length – 460 mm
- Width – 221 mm
- Height – 365 mm
- Weight excluding accessories – 12 kg
