Milling pin - PFERD - Carbide - Shaft Ø 6 mm - for INOX - Round conical shape
| € 98,53 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Delivery time 2 - 4 working days
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
652121125282
Type
| designation | KEL 1230/6 INOX |
| overall length | 70 mm |
| Milling pin Ø x length | 12 x 30 mm |
| corner | 14 α |
| radius | 2.6 mm |
Product Description
- the burr is suitable for machining, deburring, contouring, chamfering and rounding edges, preparing and levelling weld seams and changing the geometry of stainless steel (INOX)
- can be operated with compressed air or electric drives and bending shafts
- Carbide burr in round cone shape, with special INOX toothing, which was specially developed for machining stainless steel (INOX) and has up to 100 % higher cutting performance and increases tool life
- due to the low heat development, annealing colours in the material are prevented, a high-quality surface finish is achieved thanks to the optimum chip formation
- thanks to "PFERDERGONOMICS", vibration and noise pollution are reduced and working comfort is increased
- a drive power of 300 to 500 W is required in the upper speed range for the economical use of burrs with a shank diameter of 6 mm or more
- to avoid accidents and premature wear, only backlash-free clamping systems/drives should be used
- Material - carbide
- Toothing - INOX
- Shape - round cone shape
- Shank diameter - 6 mm
- Total length - 60 to 70 mm
- Burr Ø x length - 8 x 20 to 12 x 30 mm
- Angle - 14 to 16 α
- Radius - 1.25 to 2.9 mm
- according to standard - DIN 8032
Versions: (3)
Narrow down your selection
designation
overall length
Milling pin Ø x length
corner
radius
Item No.: 652121124982
Type
| designation | KEL 0820/6 INOX |
| overall length | 60 mm |
| Milling pin Ø x length | 8 x 20 mm |
| corner | 16 α |
| radius | 1.25 mm |
Item No.: 652121125082
Type
| designation | KEL 1020/6 INOX |
| overall length | 60 mm |
| Milling pin Ø x length | 10 x 20 mm |
| corner | 14 α |
| radius | 2.9 mm |
Item No.: 652121125282
Type
| designation | KEL 1230/6 INOX |
| overall length | 70 mm |
| Milling pin Ø x length | 12 x 30 mm |
| corner | 14 α |
| radius | 2.6 mm |
Ratings
No evaluation has been given
