Milling pin - PFERD - Carbide - Shaft Ø 6 mm - for INOX - with spur teeth
| From € 47,80 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The milling pin is suitable for machining, deburring, machining contours, chamfering and rounding edges, for preparing and leveling welds and for changing the geometry of stainless steel (INOX)
- The operation can be carried out with compressed air or electric drives and bending shafts
- Milling pin of tungsten carbide in cylindrical shape and with toothed teeth, with special INOX teeth, specially developed for the processing of stainless steel (INOX), which has a cutting performance of up to 100% and increases the service life
- Due to the low heat development, initial colors are prevented in the material, and due to the optimal chip formation, a high-quality surface finish is achieved
- Thanks to "PFERDERGONOMICS", vibration and noise are reduced, and work comfort is increased
- For the economical use of the milling pins with a shaft diameter of 6 mm and above, a drive power of 300 to 500 W is required in the upper speed range
- In order to avoid accidents and premature wear, only play-free clamping systems / drives should be used
- Material - hard metal
- Toothing - INOX
- Form - Cylindrical form
- Spur toothing - yes
- Shaft diameter - 6 mm
- Total length - 55 or 65 mm
- Milling pin Ø x length - 6 x 16 or 12 x 25 mm
- In accordance with DIN 8032
Versions: (2)
Narrow down your selection
designation
overall length
Milling pin Ø x length
| Article No. | designation | overall length | Milling pin Ø x length | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|
|
|
652121100282 | ZYAS 0616/6 INOX | 55 mm | 6 x 16 mm |
|
||||
|
|||||||||
|
652121100582 | ZYAS 1225/6 INOX | 65 mm | 12 x 25 mm |
|
||||
|
|||||||||
Ratings
No evaluation has been given
