Milling pin - PFERD - Carbide - Shaft Ø 6 mm - for steel - spherical shape
| From € 31,47 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- the burr is suitable for machining, deburring, contouring, geometry modification and fettling of steel and cast steel, especially round moulds
- can be operated with compressed air or electric drives and bending shafts
- spherical burr made of carbide with special STEEL toothing, which was specially developed for machining steel and cast steel and has up to 50 % higher cutting performance
- the special tooth geometry significantly improves chip evacuation and the lower thermal load protects the workpiece and tool
- thanks to "PFERDERGONOMICS", vibration and noise pollution are reduced and working comfort is increased
- a drive power of 300 to 500 W is required in the upper speed range for the economical use of burrs with a shank diameter of 6 mm or more
- to avoid accidents and premature wear, only backlash-free clamping systems/drives should be used
- Material - carbide
- Toothing - STEEL
- Shape - spherical shape
- Shank diameter - 6 mm
- Total length - 45 to 54 mm
- Burr Ø x length - 6 x 5 to 16 x 14 mm
- according to standard - DIN 8032
Versions: (5)
Narrow down your selection
designation
overall length
Milling pin Ø x length
Item No.: 652121112587
Type
| designation | KUD 0605/6 STEEL |
| overall length | 45 mm |
| Milling pin Ø x length | 6 x 5 mm |
Item No.: 652121112687
Type
| designation | KUD 0807/6 STEEL |
| overall length | 47 mm |
| Milling pin Ø x length | 8 x 7 mm |
Item No.: 652121112787
Type
| designation | KUD 1009/6 STEEL |
| overall length | 49 mm |
| Milling pin Ø x length | 10 x 9 mm |
Item No.: 652121112887
Type
| designation | KUD 1210/6 STEEL |
| overall length | 51 mm |
| Milling pin Ø x length | 12 x 10 mm |
Item No.: 652121112987
Type
| designation | KUD 1614/6 STEEL |
| overall length | 54 mm |
| Milling pin Ø x length | 16 x 14 mm |
Ratings
No evaluation has been given
