Milling pin - PFERD - Carbide - Shank Ø 6 mm - for cast iron - with toothed teeth
| € 47,95 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Delivery time 2 - 4 working days
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
652121100583
Type
| designation | ZYAS 1225/6 CAST |
| overall length | 65 mm |
| Milling pin Ø x length | 12 x 25 mm |
Product Description
- the burr is suitable for machining, deburring, contouring, chamfering and rounding edges and for changing the geometry of cast iron
- can be operated with compressed air or electric drives and bending shafts
- Cylindrical carbide burr with face toothing, with special CAST toothing, which was specially developed for machining cast iron and has up to 100 % higher cutting performance and increases tool life
- the burr has noticeably increased aggressiveness and very good chip removal of large chips
- thanks to "PFERDERGONOMICS", vibration and noise pollution are reduced
- a drive power of 300 to 500 W is required in the upper speed range for the economical use of burrs with a shank diameter of 6 mm or more
- to avoid accidents and premature wear, only backlash-free clamping systems/drives should be used
- Material - carbide
- Toothing - CAST
- Shape - cylinder shape
- Face toothing - yes
- Shank diameter - 6 mm
- Total length - 55 to 65 mm
- Burr Ø x length - 6 x 16 to 12 x 25 mm
- according to standard - DIN 8032
Versions: (3)
Narrow down your selection
designation
overall length
Milling pin Ø x length
Item No.: 652121100283
Type
| designation | ZYAS 0616/6 CAST |
| overall length | 55 mm |
| Milling pin Ø x length | 6 x 16 mm |
Item No.: 652121100483
Type
| designation | ZYAS 1020/6 CAST |
| overall length | 60 mm |
| Milling pin Ø x length | 10 x 20 mm |
Item No.: 652121100583
Type
| designation | ZYAS 1225/6 CAST |
| overall length | 65 mm |
| Milling pin Ø x length | 12 x 25 mm |
Ratings
No evaluation has been given
