Product Description
- the burr is suitable for machining, deburring, contouring, geometry modification and fettling of steel and cast steel, especially round moulds
- can be operated with compressed air or electric drives and bending shafts
- Carbide burr in cylindrical shape, a combination of cylindrical and spherical geometry, with special STEEL toothing, which was specially developed for machining steel and cast steel and has up to 50 % higher cutting performance
- the special tooth geometry significantly improves chip evacuation and the lower thermal load protects the workpiece and tool
- thanks to "PFERDERGONOMICS", vibration and noise pollution are reduced and working comfort is increased
- a drive power of 300 to 500 W is required in the upper speed range for the economical use of burrs with a shank diameter of 6 mm or more
- to avoid accidents and premature wear, only backlash-free clamping systems/drives should be used
- Material - carbide
- Toothing - STEEL
- Mould - cylindrical mould
- Shank diameter - 6 mm
- Total length - 55 to 65 mm
- Burr Ø x length - 6 x 16 to 16 x 25 mm
- according to standard - DIN 8032
