Milling pin - PFERD - Carbide metal - Shank Ø 6 mm - for cast iron - Round arch form
| € 44,27 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
652121117383
Type
| designation | RBF 0618/6 CAST |
| overall length | 55 mm |
| Milling pin Ø x length | 6 x 18 mm |
| radius | 1.5 mm |
Product Description
- The milling pin is suitable for machining, deburring, machining contours, chamfering and rounding edges and for changing the geometry of cast iron
- The operation can be carried out with compressed air or electric drives and bending shafts
- Milling pin of hard metal in round arch form, with special CAST teeth, specially developed for the processing of cast iron, which has a cutting performance of up to 100% and increases the service life
- The milling pin has a markedly increased aggressiveness and a very good chip removal of large chips
- Thanks to "PFERDERGONOMICS", vibration and noise are reduced
- For the economical use of the milling pins with a shaft diameter of 6 mm or more, a drive power of 300 to 500 W is required in the upper speed range
- In order to avoid accidents and premature wear, only play-free clamping systems / drives should be used
- Material - hard metal
- Toothing - CAST
- Form - Round arch form
- Shaft diameter - 6 mm
- Total length - 55 to 65 mm
- Milling pin Ø x length - 6 x 18 to 12 x 25 mm
- In accordance with DIN 8032
Versions: (3)
Narrow down your selection
designation
overall length
Milling pin Ø x length
radius
| Article No. | designation | overall length | Milling pin Ø x length | radius | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|
|
|
652121117383 | RBF 0618/6 CAST | 55 mm | 6 x 18 mm | 1.5 mm |
|
||||
|
||||||||||
|
652121117783 | RBF 1020/6 CAST | 60 mm | 10 x 20 mm | 2.5 mm |
|
||||
|
||||||||||
|
652121117883 | RBF 1225/6 CAST | 65 mm | 12 x 25 mm | 2.5 mm |
|
||||
|
||||||||||
Ratings
No evaluation has been given
