Mortising, Ø 6-20 mm, For drilling and milling of slots
| From € 28,56 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- For use in long-hole drilling machines for drilling and milling of slots.
- Good in softwood and hardwood.
- FORUM mortising Z2
- According to DIN 6442 A.
- 2-fluted, twisted version, with chip breaker. Cylindrical shank for use in collets and chucks, right rotation.
- Through the chip breaker there is a reduced power consumption of the drill spindle.
- Recommended speed 3,000- 5,000 min-1.
Versions: (7)
Narrow down your selection
Ø
Shaft
Total length
| Article No. | Ø | Shaft | Total length | Price incl. VAT | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
4317784871402 | 6 mm | 13 cyl. | 120 mm | 180 mm | 35 mm | 20 mm |
|
||||
|
||||||||||||
|
|
4317784871419 | 8 mm | 13 cyl. | 130 mm | 234 mm | 36 mm | 36 mm |
|
||||
|
||||||||||||
|
|
4317784871433 | 12 mm | 13 cyl. | 150 mm | 234 mm | 36 mm | 36 mm |
|
||||
|
||||||||||||
|
|
4317784871440 | 14 mm | 13 cyl. | 160 mm | 180 mm | 35 mm | 20 mm |
|
||||
|
||||||||||||
|
|
4317784871457 | 16 mm | 16 cyl. | 170 mm | 230 mm | 35 mm | 25 mm |
|
||||
|
||||||||||||
|
|
4317784871464 | 18 mm | 16 cyl. | 180 mm | 284 mm | 36 mm | 25 mm |
|
||||
|
||||||||||||
|
|
4317784871471 | 20 mm | 16 cyl. | 185 mm | 283 mm | 36 mm | 25 mm |
|
||||
|
||||||||||||
Ratings
No evaluation has been given
