PFERD carbide burr - cylindrical shape ZYA - FRP and FVKS - burr Ø 6 mm - shank Ø 6 and 8 mm - with drill bit BS
| € 50,20 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
652121458696
Type
| Burr Ø x length | 6 x 25 mm |
| overall length | 65 mm |
| RPM | 24,000-48,000 |
| Perforation | FRP |
| Shaft-Ø | 6 mm |
Product Description
- The cylindrical burr with the FVKS cut can be used universally on hard glass and carbon fiber reinforced thermosetting plastics and is suitable for trimming and contour milling.
- Burrs with a drill bit (BS) enable combined drilling and milling work.
- The special tooth geometry enables high feed speeds due to low cutting forces with smooth milling behavior at the same time.
- The FVK cut is suitable for machine tools and manual use due to its high concentricity.
- It is characterized by its smooth milling behavior and creates a smooth cutting edge.
- The FVKS toothing is also suitable for use on machines and robots with high feed rates.
- Material - hard metal
- Toothing - FVK and FVKS
- Shape - cylindrical shape
- Milling pin Ø x length - 6 x 25 mm and 8 x 25 mm
- Total length - 65 mm
- Speed - 18,000–36,000 and 24,000–48,000
- Shank Ø - 6 and 8 mm
Versions: (4)
Narrow down your selection
Burr Ø x length
overall length
RPM
Perforation
Shaft-Ø
| Article No. | Burr Ø x length | overall length | RPM | Perforation | Shaft-Ø | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
652121458696 | 6 x 25 mm | 65 mm | 24,000-48,000 | FRP | 6 mm |
|
||||
|
|||||||||||
|
652121458697 | 6 x 25 mm | 65 mm | 24,000-48,000 | FVKS | 6 mm |
|
||||
|
|||||||||||
|
652121458898 | 8 x 25 mm | 65 mm | 18,000-36,000 | FRP | 8 mm |
|
||||
|
|||||||||||
|
652121458897 | 8 x 25 mm | 65 mm | 18,000-36,000 | FVKS | 8 mm |
|
||||
|
|||||||||||
Ratings
No evaluation has been given
