PFERD mounted point - conical shape KE - CAST EDGE N - grain size 24 and 46 - outer-ø 16 and 35 mm - shank-ø 6 and 8 mm - PU 50 pieces - price per PU
| € 284,44 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
652332212231
Type
| Outside-ø x width | 20 x 40 mm |
| Opt. RPM | 20,900 |
| Max RPM | 20,900 |
| Grain size | 30th |
| Shaft-Ø | 6 mm |
| piece | 50 |
Product Description
- PFERD CAST EDGE mounted points are particularly suitable for use on edges and for grinding out sand inclusions and mineralization on gray and nodular cast iron in conjunction with high cutting speeds.
- The KE cone shape is suitable for a comfortable working position in surface grinding and for grinding fillets.
- The CAST EDGE mounted point is particularly dimensionally stable due to its high bond content.
- Thanks to the high edge stability, the pins can also be used economically on low-speed tool drives.
- CAST EDGE mounted points achieve their best performance at a cutting speed of 30 to 50 m / s.
- Material - silicon carbide
- Shape - cone shape
- Execution - CAST EDGE N
- Outside Ø x grinding pin width - 16 x 45 and 35 x 50 mm
- Grit size - 24 and 46
- Shank-ø - 6 and 8 mm
- Opt.RPM - 15,600 and 24,000
- Max RPM - 15,600 and 24,000
- PU - 50 pieces
Versions: (5)
Narrow down your selection
Outside-ø x width
Opt. RPM
Max RPM
Grain size
Shaft-Ø
piece
| Article No. | Outside-ø x width | Opt. RPM | Max RPM | Grain size | Shaft-Ø | piece | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
652332210231 | 16 x 45 mm | 24,000 | 24,000 | 46 | 6 mm | 50 |
|
||||
|
||||||||||||
|
652332210531 |
|
||||||||||
|
||||||||||||
|
|
652332212231 | 20 x 40 mm | 20,900 | 20,900 | 30th | 6 mm | 50 |
|
||||
|
||||||||||||
|
652332216512 |
|
||||||||||
|
||||||||||||
|
652332216262 | 35 x 50 mm | 15,600 | 15,600 | 24 | 8 mm | 50 |
|
||||
|
||||||||||||
Ratings
No evaluation has been given
