PFERD mounted point - cylindrical shape - CAST EDGE - grit size 24 - outer-ø 32 to 40 mm - shank-ø 8 mm - unit 5 pieces - price per unit
| From € 29,44 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- PFERD CAST EDGE mounted points are particularly suitable for use on edges and for grinding out sand inclusions and mineralization on gray and nodular cast iron in conjunction with high cutting speeds.
- The ZY cylinder shape is ideal for grinding bores, radii and contours.
- The CAST EDGE mounted point is particularly dimensionally stable due to its high bond content.
- Thanks to the high edge stability, the pins can also be used economically on low-speed tool drives.
- CAST EDGE mounted points achieve their best performance at a cutting speed of 30 to 50 m / s.
- Material - silicon carbide
- Shape - cylindrical shape
- Execution - CAST EDGE
- Outside Ø x grinding pin width - 32 x 40 to 40 x 40 mm
- Grain size - 24
- Shank ø - 8 mm
- Opt.RPM - 19,000 to 24,000
- Max.RPM - 23,800 to 29,800 PU - 5 pieces
Versions: (2)
Narrow down your selection
Outside-ø x width
Opt. RPM
Max RPM
Grain size
Shank-ø
piece
| Article No. | Outside-ø x width | Opt. RPM | Max RPM | Grain size | Shank-ø | piece | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
652331187502 | 32 x 40 mm | 24,000 | 29,800 | 24 | 8 mm | 5 |
|
||||
|
||||||||||||
|
652331188502 | 40 x 40 mm | 19,000 | 23,800 | 24 | 8 mm | 5 |
|
||||
|
||||||||||||
Ratings
No evaluation has been given
