Product Description
- The SMC EX600-W wireless fieldbus system is used in industrial automation to connect valve islands and I/O modules wirelessly to higher-level controllers.
- It is suitable for machines, manufacturing plants and production systems with EtherNet/IP or PROFINET communication.
- The system is used to detect and transmit signals from sensors and to control actuators.
- It is used in applications where flexible, wireless networking of automation components is required.
- The SMC EX600-W fieldbus system is a modular fieldbus system for EtherNet/IP or PROFINET networks with wireless data transmission.
- The version with a PNP output enables the control of valves and the integration of EX600 I/O units.
- The system supports the combination of wireless modules and decentralised I/O components within a modular architecture.
- Diagnostic functions, LED status indicators and NFC communication support commissioning, monitoring and maintenance.
- Compatible fieldbus protocols – EtherNet/IP or PROFINET IO
- Compatible valve series – new SY, VQC, S0700, SV
- Communication range – up to 100 m
- Data transfer rate – 10 Mbit/s / 100 Mbit/s
- Configuration file – EDS file (EtherNet) or GSDML file (PROFINET)
- Type of radio signal (frequency spreading) – Frequency-hopping spread spectrum (FHSS)
- Frequency – 2.4 GHz (2403 to 2481 MHz)
- Number of frequency channels – 79 (bandwidth: 1.0 MHz)
- Transmission speed – 250 kbit/s
- Communication range – 10 m (depending on environmental conditions)
- Supply voltage – 24V DC
- Power consumption – max. 150 mA
- Max. supply current – 4 A
- System input/output size – Max. 1280 points together with the registered remote modules
- Input/output size – Max. 128 points (decrease or increase by 16 points)
- Output type – PNP (-COM)
- Number of valve outputs – Max. 32 points (0/8/16/24/32 points)
- Connected load – solenoid valve with protective circuitry rated at 24 V DC and 1.5 W or less
- Protection rating – equivalent to IP67
- Ambient temperature (operating temperature) – –10 to +50 °C
- Ambient temperature (storage temperature) – –20 to +60 °C
- Humidity – 35 to 85 per cent relative humidity (no condensation)
- Test voltage – 500 V AC for 1 minute between external terminals and metal parts
- Insulation resistance – min. 10 MΩ (500 V DC between external terminals and metal parts)
- Standards – CE/UKCA marking
- Communication standard – ISO/IEC 14443B (Type B)
- Frequency – 13.56 MHz
- Data transfer rate – 20 to 100 kHz (I2C)
- Communication range – Up to 1 cm
- Weight – 300 g
