Item No.:
854201703727
Product Description
- The SMC EX600-WSV1 wireless remote module is used in industrial automation for the wireless connection of valve terminals and decentralised I/O components.
- It is suitable for manufacturing plants, machinery and automated production systems.
- The module is used to transmit control and process signals between field devices and the wireless base module.
- It is used in applications where flexible signal transmission is required without the need for additional communication cabling.
- The SMC EX600-WSV1 remote module is a wireless module for integrating valves and EX600 I/O units into a wireless communication system.
- The PNP output enables the control of solenoid valves within the EX600-W system architecture.
- The module communicates via an encrypted SMC wireless protocol and supports diagnostic functions via LEDs, a web interface and configuration software.
- NFC communication simplifies parameterisation and access to operating data.
- Supply voltage – 24 V DC ±10 %
- Power consumption – max. 70 mA
- Max. supply current – 4 A
- Input/output size – Max. 128 points (decrease or increase by 16 points)
- AD/DA response time – 0.1/0.2/0.5/1/2/5/10/30/60 s
- Output type – Source/PNP (-COM)
- Number of valve outputs – Max. 32 points (0/8/16/24/32 points)
- Connected load at valve output – solenoid valve with protective circuit, 24 VDC and 1.5 W or less
- Radio wave type (frequency hopping) – Frequency hopping spread spectrum (FHSS)
- Frequency – 2.4 GHz (2403 to 2481 MHz)
- Number of frequency channels – 79 ch (bandwidth: 1.0 MHz)
- Transmission speed – 250 kbit/s
- Communication range – 10 m (depending on environmental conditions)
- Protection rating – Complies with IP67
- Ambient temperature (operating temperature) – –10 to +50 °C
- Ambient temperature (storage temperature) – –20 to +60 °C
- Humidity – 35 to 85 per cent relative humidity (no condensation)
- Test voltage – 500 V AC for 1 minute between external terminals and metal parts
- Insulation resistance – min. 10 MΩ (500 VDC between external terminals and metal parts)
- Standards – CE/UKCA marking
- Communication standard – ISO/IEC 14443B (Type B)
- Frequency – 13.56 MHz
- Data transfer rate – 20 to 100 kHz (I2C)
- Communication range – up to 1 cm
- Weight – 280 g
