Submersible pump with jacket cooling for clear and dirty water - 0.26 kW - 12 m³ / h - with float switch
| € 369,13 |
| Price incl. VAT |
available after order placement within 12 weeks
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
259191103690
Product Description
- The submersible motor pump Chromatic C250 WE is ideally suited for pumping clean or polluted water and is used, for example, for basement drainage, dry storage of pits, shafts and rooms, for waste water disposal in cellars, lowering of surface water, emergency use in case of flooding or water extraction from water courses or reservoirs for pressureless irrigation.
- The submersible pump is equipped with an integrated level switch for narrow ducts from 200 mm diameter and allows automatic operation even in very narrow shafts.
- Due to the cooling jacket with overhead pressure connection, sufficient engine cooling is ensured even at low water levels (sniffing operation).
- The automatic venting is done with an additional vent screw, the removable suction strainer allows the extraction of residual water up to 5 mm.
- The pump is equipped with a double socket G 1¼ with integrated non-return valve, sealing ring and hose connection as well as a 10 m connection cable and mains plug.
- Motor housing, shaft and screws - stainless steel
- Suction strainer, outer casing, impeller, pressure cap - impact-resistant plastic
- Elastomers - NBR
- Mechanical seal - carbon graphite / ceramic
- Motor power - max. 0.26 kW
- Voltage - 230V
- Speed - 2850 rpm
- Insulation class B
- Degree of protection IPX8
- Flow rate - max. 12 m³ / h
- Delivery height - max. 8 m
- Media temperature - max. +35 ° C - temporarily +60 ° C
- Free passage - 10 mm
- Weight - 5.3 kg
Accessories
| From € 269,12 |
| Price incl. VAT |
Ratings
No evaluation has been given
