Product Description
- The angle seat check valve releases the flow in one direction and shuts off in the opposite direction.
- The valve is not suitable for the passage of mineral oils.
- The valve body is made of brass, the seat seal is made of EPDM.
- The valve has a test screw and is tested in accordance with DIN-DVGW so that it can be used for drinking water pipes.
- The overall length is standardized according to DIN 3202-M8.
- Material housing - brass
- Seal material - EPDM
- Connection thread - Rp 1/2" to Rp 3"
- Housing length - 65 to 210 mm
- H - 49 to 150 mm
- Opening pressure - 0.1 to 0.2 bar
- max. operating pressure - 10 to 16 bar
- Temperature range - -10 to max. +90 °C
A technical drawing can be found in the product data sheet.
