Product Description
- The 3-way ball valve is equipped with an electric rotary actuator and is ideal for conveying water, compressed air, oils, fuels, solvents and aggressive media, as well as for use under vacuum.
- The housing and ball are made of stainless steel, and the seals are made of Teflon and fluorinated rubber.
- The actuator is equipped with a visual position indicator and has two additional limit switches for further control tasks as well as a manual override. The electronic torque limitation prevents damage in the event of overload.
- The motor can be operated with both direct and alternating current. A heater is integrated into the actuator housing.
- Caution: The ball valve must not be used upside down!
- Housing material – stainless steel 1.4408
- Ball material – stainless steel 1.4408
- Seal material – PTFE/FKM
- Actuator housing material – polyamide 6
- Ball – L/T bore
- Nominal diameter - 12 to 40
- Connection thread (IG) - G 1/2" to G 2"
- Installation length – 79 to 164 mm
- Voltage – 24 to 240 V AC/24 to 135 V DC
- Protection class - IP 67
- Duty cycle - 75%
- Actuating time – 9 seconds.
- Operating pressure - -0.9 to 63 bar
- Media temperature - -20 to max. +180 °C
- Ambient temperature - -20 to max. +70 °C
A diagram of the switching positions can be found in the product data sheet.
