Fixed point distribution and control unit - with Wita or Grundfos pump - DN20 - connection 1" - up to 6 bar - up to 100°C
| From € 478,06 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The central heating distribution manifold is used in residential, commercial and industrial heating systems to distribute the heat transfer medium from a single heat source to multiple distribution or control units. The fixed point distribution and control unit can be used flexibly in traditional radiator systems as well as in modern space heating systems. It can also be installed in combination with both boilers and heat pumps. The distribution and control unit for central heating systems also provides the supply of a heat transfer medium to heating or air conditioning systems.
- For operation in different user zones with a single heat source, optimal zoning is made possible by mounting several distribution units on one central heating system manifold.
- Distribution units are ideal components for the optimization of a central heating system, both in terms of energy efficiency of the system and the operation and maintenance of the system.
- The fixed point distribution and control unit is more complex than simple direct distributors. It provides the supply of a heat transfer fluid from a primary side to a secondary side. In low-temperature space heating systems, it maintains the fluid temperature at the set value. The supply temperature can be manually adjusted between 20°C and 70°C with the thermostatic controller.
- Due to the small distance of 90 mm between flow and return, an extremely compact installation is possible.
- The direct manifold comes with an EPP insulation housing, a wall bracket, a primary shut-off ball valve, a secondary shut-off ball valve with thermometers, and a high-efficiency circulation pump.
- The positioning of the components inside the thermal shell is changeable, which allows to reverse the flow and the return during installation.
- Kv - 7.5 m³/h (The flow coefficient Kv refers only to the mixing valve)
- Maximum operating pressure - 6 bar
- Maximum operating temperature - 100 °C
- System side connection - 1"
- Boiler side connection - 1"
- Center distance - 90 mm
- Setting the flow temperature - 20°C to 70°C
- Threaded connections - ISO228 (corresponds to DIN EN ISO 228 and BS EN ISO 228)
- Check valve in the return line
- Right â left reversible
- Width - 180 mm
- Height - 330 mm
- Depth incl. thermostat regulator - 170 mm
Versions: (2)
| Article No. | Pump type | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|
|
509795290CP0 | with Wita pump |
|
||||
|
|||||||
|
|
509795290CPG | with Grundfos pump |
|
||||
|
|||||||
This article is accessory of...
Ratings
No evaluation has been given
