Product Description
- The high-pressure ball valve is equipped with an electric rotary actuator and is ideal for conducting hydraulic oil, heating oil and for use under vacuum.
- The housing is made of galvanised steel, the ball is made of hard chrome-plated steel. The ball valve is equipped with polyoxymethylene ball seals and nitrile rubber shaft seals.
- The actuator is equipped with a visual position indicator and has two additional limit switches for further control tasks as well as a manual override. The electronic torque limitation prevents damage in the event of overload.
- The motor can be operated with both direct and alternating current. A heater is integrated into the actuator housing.
- Caution: The ball valve must not be used upside down!
- Housing material – galvanised steel
- Ball material – hard chrome-plated steel
- Ball seal material – POM
- Material of switch shaft seal – NBR
- Actuator housing material – polyamide 6
- Nominal diameter - 6 to 50
- Connection thread (IG) - G 1/4" to G 2"
- Installation length – 69 to 140 mm
- Voltage – 24 to 240 V AC/24 to 135 V DC
- Protection class - IP 67
- Duty cycle - 75%
- Actuating time – 9 to 13 seconds.
- Operating pressure - -0.3 to 500 bar
- Media temperature - -20 to max. +100 °C
- Ambient temperature - -20 to max. +70 °C
