Milling pin - PFERD - Carbide - Shaft Ø 6 mm - for INOX - Flame shape
| From € 42,64 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- the burr is suitable for machining, deburring, contouring, chamfering and rounding edges, preparing and levelling weld seams and changing the geometry of stainless steel (INOX)
- can be operated with compressed air or electric drives and bending shafts
- Burr made of carbide in flame shape, with special INOX toothing, which was specially developed for machining stainless steel (INOX) and has up to 100 % higher cutting performance and increases tool life
- due to the low heat development, annealing colours in the material are prevented, a high-quality surface finish is achieved thanks to the optimum chip formation
- thanks to "PFERDERGONOMICS", vibration and noise pollution are reduced and working comfort is increased
- a drive power of 300 to 500 W is required in the upper speed range for the economical use of burrs with a shank diameter of 6 mm or more
- to avoid accidents and premature wear, only backlash-free clamping systems/drives should be used
- Material - carbide
- Toothing - INOX
- Shape - flame shape
- Shank diameter - 6 mm
- Total length - 60 to 70 mm
- Burr Ø x length - 8 x 20 to 12 x 30 mm
- Radius - 1.5 to 2.1 mm
- according to standard - DIN 8032
Versions: (3)
Narrow down your selection
designation
overall length
Milling pin Ø x length
radius
| Article No. | designation | overall length | Milling pin Ø x length | radius | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|
|
|
652121103182 | B 0820/6 INOX | 60 mm | 8 x 20 mm | 1.5 mm |
|
||||
|
||||||||||
|
652121103282 | B 1025/6 INOX | 65 mm | 10 x 25 mm | 1.7 mm |
|
||||
|
||||||||||
|
652121103382 | B 1230/6 INOX | 70 mm | 12 x 30 mm | 2.1 mm |
|
||||
|
||||||||||
Ratings
No evaluation has been given
