Milling pin - PFERD - Carbide - Shaft Ø 6 mm - for cast iron - ball shape
| € 41,11 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Delivery time 2 - 4 working days
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
652121112783
Type
| designation | KUD 1009/6 CAST |
| overall length | 49 mm |
| Milling pin Ø x length | 10 x 9 mm |
Product Description
- the burr is suitable for machining, deburring, contouring, chamfering and rounding edges and for changing the geometry of cast iron
- can be operated with compressed air or electric drives and bending shafts
- Burr made of carbide in spherical shape, with special CAST toothing, which was specially developed for machining cast iron and has up to 100 % higher cutting performance and increases tool life
- the burr has noticeably increased aggressiveness and very good chip removal of large chips
- thanks to "PFERDERGONOMICS", vibration and noise pollution are reduced
- a drive power of 300 to 500 W is required in the upper speed range for the economical use of burrs with a shank diameter of 6 mm or more
- to avoid accidents and premature wear, only backlash-free clamping systems/drives should be used
- Material - carbide
- Toothing - CAST
- Shape - spherical shape
- Shank diameter - 6 mm
- Total length - 45 to 51 mm
- Burr Ø x length - 6 x 5 to 12 x 10 mm
- according to standard - DIN 8032
Versions: (2)
Narrow down your selection
designation
overall length
Milling pin Ø x length
| Article No. | designation | overall length | Milling pin Ø x length | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|
|
|
652121112783 | KUD 1009/6 CAST | 49 mm | 10 x 9 mm |
|
||||
|
|||||||||
|
652121112883 | KUD 1210/6 CAST | 51 mm | 12 x 10 mm |
|
||||
|
|||||||||
Ratings
No evaluation has been given
